Failed
gprs:oc2g.cs_paging_gprs_active.py (from gprs_oc2g)
Stacktrace
osmo-stp_10.42.42.5(pid=20960): Process ended prematurely: osmo-stp_10.42.42.5(pid=20960) [trial-2365↪gprs:oc2g↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20960)]
Standard Output
---------------------------------------------- trial-2365 gprs:oc2g cs_paging_gprs_active.py ---------------------------------------------- 21:58:10.503343 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 21:58:10.513745 tst gprs:oc2g: Using 1 x bts (candidates: 1) 21:58:10.643659 tst cs_paging_gprs_active.py: using LAC 23931 21:58:10.771095 tst cs_paging_gprs_active.py: using RAC 216 21:58:10.899742 tst cs_paging_gprs_active.py: using CellId 23931 21:58:11.021501 tst cs_paging_gprs_active.py: using BVCI 23932 21:58:11.044669 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 21:58:11.055299 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 21:58:11.065577 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 21:58:11.075992 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 21:58:11.086448 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 21:58:11.096808 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 21:58:11.107304 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 21:58:11.117828 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 21:58:11.128361 tst gprs:oc2g: Using 1 x modem (candidates: 4) 21:58:11.249601 tst gprs:oc2g: Using 1 x modem (candidates: 4) 21:58:11.548632 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 21:58:11.686370 run iperf3-srv_10.42.42.10: Starting iperf3-srv 21:58:12.026156 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20950): Launched 21:58:12.309469 run iperf3-srv_10.42.42.10(pid=20951): Launched 21:58:12.512942 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 21:58:12.651270 run iperf3-srv_10.42.42.10: Starting iperf3-srv 21:58:12.994047 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20952): Launched 21:58:13.277046 run iperf3-srv_10.42.42.10(pid=20953): Launched 21:58:13.479608 tst cs_paging_gprs_active.py:38: start network... 21:58:13.617954 run osmo-hlr_10.42.42.2: Starting osmo-hlr 21:58:14.143657 run create_hlr_db(pid=20954): Launched 21:58:14.332191 bus /sierra_2: Setting Powered False 21:58:15.354437 run create_hlr_db(pid=20954): Terminated: ok {rc=0} 21:58:15.764426 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20956): Launched 21:58:16.247261 run osmo-hlr_10.42.42.2(pid=20957): Launched 21:58:16.447986 run osmo-stp_10.42.42.5: Starting osmo-stp 21:58:17.045326 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20959): Launched 21:58:17.379534 run osmo-stp_10.42.42.5(pid=20960): Launched 21:58:17.498923 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 21:58:18.070445 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20962): Launched 21:58:18.187612 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 21:58:18.472881 run patchelf(pid=20963): Launched 21:58:18.664744 run osmo-stp_10.42.42.5(pid=20960): ERR: Terminated: ERROR {rc=1} [trial-2365↪gprs:oc2g↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20960)] 21:58:18.805640 run osmo-stp_10.42.42.5(pid=20960): stdout: | (launched: 2022-12-09_21:58:17.215745) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:58:18.946397 run osmo-stp_10.42.42.5(pid=20960): stderr: | �[0;m�[38;5;43m20221209215817408 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209215817408 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209215817408 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209215817409 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209215817409 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209215817409 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209215817409 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:58:19.081916 run osmo-stp_10.42.42.5(pid=20960): stdout: | (launched: 2022-12-09_21:58:17.215745) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:58:19.216148 run osmo-stp_10.42.42.5(pid=20960): stderr: | �[0;m�[38;5;43m20221209215817408 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209215817408 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209215817408 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209215817409 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209215817409 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209215817409 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209215817409 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:58:19.373289 run patchelf(pid=20963): Terminating (SIGINT) 21:58:19.558039 run patchelf(pid=20963): Terminated: ok {rc=0} 21:58:19.591688 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=20960): Process ended prematurely: osmo-stp_10.42.42.5(pid=20960) [trial-2365↪gprs:oc2g↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20960)] [trial-2365↪gprs:oc2g↪cs_paging_gprs_active.py:38] 21:58:19.601442 tst cs_paging_gprs_active.py:38: Test FAILED (9.1 sec) 21:58:19.665088 run osmo-hlr_10.42.42.2(pid=20957): ERR: Terminated: ERROR {rc=237} [trial-2365↪gprs:oc2g↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=20957)] 21:58:19.716940 run osmo-hlr_10.42.42.2(pid=20957): stdout: | (launched: 2022-12-09_21:58:15.958700) 21:58:19.768994 run osmo-hlr_10.42.42.2(pid=20957): stderr: | �[0;m�[1;31m20221209215816192 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209215816192 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209215816192 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209215816192 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209215816192 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209215816192 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209215816204 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2365/run.2022-12-09_21-44-27/gprs:oc2g/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209215816219 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209215816219 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209215816219 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 21:58:19.813400 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20950): Terminating (SIGTERM) 21:58:19.855260 run iperf3-srv_10.42.42.10(pid=20951): Terminating (SIGTERM) 21:58:19.897236 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20952): Terminating (SIGTERM) 21:58:19.939432 run iperf3-srv_10.42.42.10(pid=20953): Terminating (SIGTERM) 21:58:19.981474 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20956): Terminating (SIGTERM) 21:58:20.023452 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20959): Terminating (SIGTERM) 21:58:20.065506 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20962): Terminating (SIGTERM) 21:58:20.075336 --- ParallelTerminationStrategy: PID 20950 died... 21:58:20.131324 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20950): Terminated: ok {rc=0} 21:58:20.141610 --- ParallelTerminationStrategy: PID 20951 died... 21:58:20.197353 run iperf3-srv_10.42.42.10(pid=20951): Terminated {rc=256} 21:58:20.207592 --- ParallelTerminationStrategy: PID 20952 died... 21:58:20.263135 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20952): Terminated: ok {rc=0} 21:58:20.273362 --- ParallelTerminationStrategy: PID 20953 died... 21:58:20.328632 run iperf3-srv_10.42.42.10(pid=20953): Terminated {rc=256} 21:58:20.338831 --- ParallelTerminationStrategy: PID 20956 died... 21:58:20.394372 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20956): Terminated: ok {rc=0} 21:58:20.404629 --- ParallelTerminationStrategy: PID 20959 died... 21:58:20.459998 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20959): Terminated: ok {rc=0} 21:58:20.470066 --- ParallelTerminationStrategy: PID 20962 died... 21:58:20.525597 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20962): Terminated: ok {rc=0} 21:58:20.612893 bus /gobi_0: Setting Powered False 21:58:21.718841 bus /gobi_0: Setting Powered False 21:58:22.829645 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=20960): Process ended prematurely: osmo-stp_10.42.42.5(pid=20960) [trial-2365↪gprs:oc2g↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20960)]