Failed
gprs:trx-b200+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=21972): Process ended prematurely: osmo-stp_10.42.42.5(pid=21972) [trial-2365↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21972)]
Standard Output
---------------------------------------------- trial-2365 gprs:trx-b200+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 22:08:47.181450 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:08:47.193343 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 22:08:47.355011 tst cs_paging_gprs_active.py: using LAC 23987 22:08:47.472459 tst cs_paging_gprs_active.py: using RAC 17 22:08:47.590159 tst cs_paging_gprs_active.py: using CellId 23987 22:08:47.707439 tst cs_paging_gprs_active.py: using BVCI 23988 22:08:47.730468 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:08:47.741220 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:08:47.751705 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:08:47.762576 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:08:47.773429 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:08:47.784276 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:08:47.795192 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:08:47.805950 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:08:47.816680 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 22:08:47.932653 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 22:08:48.210772 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 22:08:48.336715 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:08:48.650857 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21962): Launched 22:08:48.911085 run iperf3-srv_10.42.42.10(pid=21963): Launched 22:08:49.095502 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 22:08:49.221569 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:08:49.534923 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21964): Launched 22:08:49.795105 run iperf3-srv_10.42.42.10(pid=21965): Launched 22:08:49.979860 tst cs_paging_gprs_active.py:38: start network... 22:08:50.105815 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:08:50.580786 run create_hlr_db(pid=21966): Launched 22:08:50.755868 bus /gobi_6: Setting Powered False 22:08:51.775446 run create_hlr_db(pid=21966): Terminated: ok {rc=0} 22:08:52.179442 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21968): Launched 22:08:52.482166 run osmo-hlr_10.42.42.2(pid=21969): Launched 22:08:52.597961 run osmo-stp_10.42.42.5: Starting osmo-stp 22:08:53.128748 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21971): Launched 22:08:53.431242 run osmo-stp_10.42.42.5(pid=21972): Launched 22:08:53.541835 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:08:54.070750 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21974): Launched 22:08:54.178902 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:08:54.444672 run patchelf(pid=21975): Launched 22:08:54.624113 run osmo-stp_10.42.42.5(pid=21972): ERR: Terminated: ERROR {rc=1} [trial-2365↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21972)] 22:08:54.755090 run osmo-stp_10.42.42.5(pid=21972): stdout: | (launched: 2022-12-09_22:08:53.282440) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:08:54.886322 run osmo-stp_10.42.42.5(pid=21972): stderr: | �[0;m�[38;5;43m20221209220853452 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209220853452 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209220853452 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209220853453 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209220853455 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209220853455 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209220853455 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:08:55.013481 run osmo-stp_10.42.42.5(pid=21972): stdout: | (launched: 2022-12-09_22:08:53.282440) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:08:55.139207 run osmo-stp_10.42.42.5(pid=21972): stderr: | �[0;m�[38;5;43m20221209220853452 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209220853452 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209220853452 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209220853453 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209220853455 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209220853455 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209220853455 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:08:55.286082 run patchelf(pid=21975): Terminating (SIGINT) 22:08:55.459522 run patchelf(pid=21975): Terminated: ok {rc=0} 22:08:55.491185 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=21972): Process ended prematurely: osmo-stp_10.42.42.5(pid=21972) [trial-2365↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21972)] [trial-2365↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 22:08:55.500342 tst cs_paging_gprs_active.py:38: Test FAILED (8.4 sec) 22:08:55.560992 run osmo-hlr_10.42.42.2(pid=21969): ERR: Terminated: ERROR {rc=237} [trial-2365↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=21969)] 22:08:55.610133 run osmo-hlr_10.42.42.2(pid=21969): stdout: | (launched: 2022-12-09_22:08:52.333354) 22:08:55.659911 run osmo-hlr_10.42.42.2(pid=21969): stderr: | �[0;m�[1;31m20221209220852506 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209220852506 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209220852506 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209220852506 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209220852507 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209220852507 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209220852519 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2365/run.2022-12-09_21-44-27/gprs:trx-b200+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209220852528 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209220852528 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209220852528 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:08:55.702080 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21962): Terminating (SIGTERM) 22:08:55.742291 run iperf3-srv_10.42.42.10(pid=21963): Terminating (SIGTERM) 22:08:55.782036 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21964): Terminating (SIGTERM) 22:08:55.821816 run iperf3-srv_10.42.42.10(pid=21965): Terminating (SIGTERM) 22:08:55.861709 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21968): Terminating (SIGTERM) 22:08:55.901897 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21971): Terminating (SIGTERM) 22:08:55.941959 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21974): Terminating (SIGTERM) 22:08:55.951370 --- ParallelTerminationStrategy: PID 21962 died... 22:08:56.004924 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21962): Terminated: ok {rc=0} 22:08:56.014855 --- ParallelTerminationStrategy: PID 21963 died... 22:08:56.068282 run iperf3-srv_10.42.42.10(pid=21963): Terminated {rc=256} 22:08:56.077822 --- ParallelTerminationStrategy: PID 21964 died... 22:08:56.131343 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21964): Terminated: ok {rc=0} 22:08:56.140755 --- ParallelTerminationStrategy: PID 21965 died... 22:08:56.193817 run iperf3-srv_10.42.42.10(pid=21965): Terminated {rc=256} 22:08:56.203291 --- ParallelTerminationStrategy: PID 21968 died... 22:08:56.256046 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21968): Terminated: ok {rc=0} 22:08:56.265781 --- ParallelTerminationStrategy: PID 21971 died... 22:08:56.318526 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21971): Terminated: ok {rc=0} 22:08:56.328272 --- ParallelTerminationStrategy: PID 21974 died... 22:08:56.381517 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21974): Terminated: ok {rc=0} 22:08:56.469700 bus /gobi_0: Setting Powered False 22:08:57.571870 bus /gobi_0: Setting Powered False 22:08:58.678735 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=21972): Process ended prematurely: osmo-stp_10.42.42.5(pid=21972) [trial-2365↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21972)]