Failed
gprs:trx-b200+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=22040): Process ended prematurely: osmo-stp_10.42.42.5(pid=22040) [trial-2365↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22040)]
Standard Output
---------------------------------------------- trial-2365 gprs:trx-b200+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 22:09:46.968777 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:09:46.985739 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 22:09:47.166262 tst cs_paging_gprs_active.py: using LAC 23992 22:09:47.286191 tst cs_paging_gprs_active.py: using RAC 22 22:09:47.405067 tst cs_paging_gprs_active.py: using CellId 23992 22:09:47.528376 tst cs_paging_gprs_active.py: using BVCI 23993 22:09:47.551594 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:09:47.562593 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:09:47.573511 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:09:47.585060 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:09:47.596275 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:09:47.607728 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:09:47.619371 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:09:47.631060 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:09:47.642282 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 22:09:47.766804 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 22:09:48.048093 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 22:09:48.174030 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:09:48.488123 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22030): Launched 22:09:48.748827 run iperf3-srv_10.42.42.10(pid=22031): Launched 22:09:48.933401 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 22:09:49.058673 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:09:49.372083 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22032): Launched 22:09:49.633124 run iperf3-srv_10.42.42.10(pid=22033): Launched 22:09:49.817588 tst cs_paging_gprs_active.py:38: start network... 22:09:49.943935 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:09:50.422014 run create_hlr_db(pid=22034): Launched 22:09:50.596275 bus /gobi_6: Setting Powered False 22:09:51.617701 run create_hlr_db(pid=22034): Terminated: ok {rc=0} 22:09:52.047705 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22036): Launched 22:09:52.372421 run osmo-hlr_10.42.42.2(pid=22037): Launched 22:09:52.490432 run osmo-stp_10.42.42.5: Starting osmo-stp 22:09:53.051433 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22039): Launched 22:09:53.373838 run osmo-stp_10.42.42.5(pid=22040): Launched 22:09:53.491165 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:09:54.054547 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22042): Launched 22:09:54.169914 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:09:54.451929 run patchelf(pid=22043): Launched 22:09:54.641661 run osmo-stp_10.42.42.5(pid=22040): ERR: Terminated: ERROR {rc=1} [trial-2365↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22040)] 22:09:54.779702 run osmo-stp_10.42.42.5(pid=22040): stdout: | (launched: 2022-12-09_22:09:53.215712) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:09:54.918283 run osmo-stp_10.42.42.5(pid=22040): stderr: | �[0;m�[38;5;43m20221209220953409 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209220953409 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209220953409 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209220953409 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209220953410 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209220953410 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209220953410 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:09:55.052780 run osmo-stp_10.42.42.5(pid=22040): stdout: | (launched: 2022-12-09_22:09:53.215712) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:09:55.185589 run osmo-stp_10.42.42.5(pid=22040): stderr: | �[0;m�[38;5;43m20221209220953409 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209220953409 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209220953409 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209220953409 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209220953410 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209220953410 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209220953410 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:09:55.340487 run patchelf(pid=22043): Terminating (SIGINT) 22:09:55.523171 run patchelf(pid=22043): Terminated: ok {rc=0} 22:09:55.556671 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=22040): Process ended prematurely: osmo-stp_10.42.42.5(pid=22040) [trial-2365↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22040)] [trial-2365↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 22:09:55.566569 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 22:09:55.629227 run osmo-hlr_10.42.42.2(pid=22037): ERR: Terminated: ERROR {rc=237} [trial-2365↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=22037)] 22:09:55.680373 run osmo-hlr_10.42.42.2(pid=22037): stdout: | (launched: 2022-12-09_22:09:52.213036) 22:09:55.732194 run osmo-hlr_10.42.42.2(pid=22037): stderr: | �[0;m�[1;31m20221209220952413 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209220952413 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209220952413 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209220952413 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209220952413 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209220952413 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209220952424 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2365/run.2022-12-09_21-44-27/gprs:trx-b200+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209220952433 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209220952433 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209220952433 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:09:55.776454 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22030): Terminating (SIGTERM) 22:09:55.818130 run iperf3-srv_10.42.42.10(pid=22031): Terminating (SIGTERM) 22:09:55.859882 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22032): Terminating (SIGTERM) 22:09:55.901473 run iperf3-srv_10.42.42.10(pid=22033): Terminating (SIGTERM) 22:09:55.943190 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22036): Terminating (SIGTERM) 22:09:55.984928 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22039): Terminating (SIGTERM) 22:09:56.027079 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22042): Terminating (SIGTERM) 22:09:56.036694 --- ParallelTerminationStrategy: PID 22030 died... 22:09:56.092701 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22030): Terminated: ok {rc=0} 22:09:56.102680 --- ParallelTerminationStrategy: PID 22031 died... 22:09:56.158011 run iperf3-srv_10.42.42.10(pid=22031): Terminated {rc=256} 22:09:56.167912 --- ParallelTerminationStrategy: PID 22032 died... 22:09:56.223237 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22032): Terminated: ok {rc=0} 22:09:56.233216 --- ParallelTerminationStrategy: PID 22033 died... 22:09:56.288136 run iperf3-srv_10.42.42.10(pid=22033): Terminated {rc=256} 22:09:56.298060 --- ParallelTerminationStrategy: PID 22036 died... 22:09:56.353416 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22036): Terminated: ok {rc=0} 22:09:56.363559 --- ParallelTerminationStrategy: PID 22039 died... 22:09:56.419252 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22039): Terminated: ok {rc=0} 22:09:56.429275 --- ParallelTerminationStrategy: PID 22042 died... 22:09:56.484328 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22042): Terminated: ok {rc=0} 22:09:56.572191 bus /gobi_0: Setting Powered False 22:09:57.679199 bus /gobi_0: Setting Powered False 22:09:58.790014 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=22040): Process ended prematurely: osmo-stp_10.42.42.5(pid=22040) [trial-2365↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22040)]