Failed
gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=22650): Process ended prematurely: osmo-stp_10.42.42.5(pid=22650) [trial-2365↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22650)]
Standard Output
---------------------------------------------- trial-2365 gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 22:10:47.320265 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:10:47.332108 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 22:10:47.484265 tst cs_paging_gprs_active.py: using LAC 23997 22:10:47.610031 tst cs_paging_gprs_active.py: using RAC 27 22:10:47.738357 tst cs_paging_gprs_active.py: using CellId 23997 22:10:47.862944 tst cs_paging_gprs_active.py: using BVCI 23998 22:10:47.887668 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:10:47.899420 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:10:47.910923 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:10:47.922402 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:10:47.933833 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:10:47.945331 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:10:47.956835 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:10:47.968239 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:10:47.979852 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 22:10:48.098700 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 22:10:48.380470 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 22:10:48.506893 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:10:48.822128 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22640): Launched 22:10:49.084138 run iperf3-srv_10.42.42.10(pid=22641): Launched 22:10:49.269813 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 22:10:49.396180 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:10:49.710993 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22642): Launched 22:10:49.974440 run iperf3-srv_10.42.42.10(pid=22643): Launched 22:10:50.162112 tst cs_paging_gprs_active.py:38: start network... 22:10:50.289999 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:10:50.772588 run create_hlr_db(pid=22644): Launched 22:10:50.947183 bus /gobi_6: Setting Powered False 22:10:51.968093 run create_hlr_db(pid=22644): Terminated: ok {rc=0} 22:10:52.398958 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22646): Launched 22:10:52.723595 run osmo-hlr_10.42.42.2(pid=22647): Launched 22:10:52.841351 run osmo-stp_10.42.42.5: Starting osmo-stp 22:10:53.403554 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22649): Launched 22:10:53.726577 run osmo-stp_10.42.42.5(pid=22650): Launched 22:10:53.843855 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:10:54.409236 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22652): Launched 22:10:54.524831 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:10:54.806847 run patchelf(pid=22653): Launched 22:10:54.997455 run osmo-stp_10.42.42.5(pid=22650): ERR: Terminated: ERROR {rc=1} [trial-2365↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22650)] 22:10:55.136685 run osmo-stp_10.42.42.5(pid=22650): stdout: | (launched: 2022-12-09_22:10:53.568273) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:10:55.275360 run osmo-stp_10.42.42.5(pid=22650): stderr: | �[0;m�[38;5;43m20221209221053760 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209221053761 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209221053761 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209221053761 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209221053762 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209221053762 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209221053762 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:10:55.409598 run osmo-stp_10.42.42.5(pid=22650): stdout: | (launched: 2022-12-09_22:10:53.568273) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:10:55.542586 run osmo-stp_10.42.42.5(pid=22650): stderr: | �[0;m�[38;5;43m20221209221053760 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209221053761 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209221053761 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209221053761 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209221053762 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209221053762 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209221053762 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:10:55.697996 run patchelf(pid=22653): Terminating (SIGINT) 22:10:55.880278 run patchelf(pid=22653): Terminated: ok {rc=0} 22:10:55.913828 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=22650): Process ended prematurely: osmo-stp_10.42.42.5(pid=22650) [trial-2365↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22650)] [trial-2365↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 22:10:55.923652 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 22:10:55.986580 run osmo-hlr_10.42.42.2(pid=22647): ERR: Terminated: ERROR {rc=237} [trial-2365↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=22647)] 22:10:56.038032 run osmo-hlr_10.42.42.2(pid=22647): stdout: | (launched: 2022-12-09_22:10:52.564840) 22:10:56.090251 run osmo-hlr_10.42.42.2(pid=22647): stderr: | �[0;m�[1;31m20221209221052765 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209221052765 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209221052765 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209221052765 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209221052765 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209221052765 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209221052778 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2365/run.2022-12-09_21-44-27/gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209221052786 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209221052787 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209221052787 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:10:56.135071 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22640): Terminating (SIGTERM) 22:10:56.177205 run iperf3-srv_10.42.42.10(pid=22641): Terminating (SIGTERM) 22:10:56.219310 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22642): Terminating (SIGTERM) 22:10:56.261430 run iperf3-srv_10.42.42.10(pid=22643): Terminating (SIGTERM) 22:10:56.303619 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22646): Terminating (SIGTERM) 22:10:56.345420 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22649): Terminating (SIGTERM) 22:10:56.387428 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22652): Terminating (SIGTERM) 22:10:56.397204 --- ParallelTerminationStrategy: PID 22640 died... 22:10:56.453952 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22640): Terminated: ok {rc=0} 22:10:56.464110 --- ParallelTerminationStrategy: PID 22641 died... 22:10:56.519758 run iperf3-srv_10.42.42.10(pid=22641): Terminated {rc=256} 22:10:56.529944 --- ParallelTerminationStrategy: PID 22642 died... 22:10:56.585740 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22642): Terminated: ok {rc=0} 22:10:56.595666 --- ParallelTerminationStrategy: PID 22643 died... 22:10:56.651065 run iperf3-srv_10.42.42.10(pid=22643): Terminated {rc=256} 22:10:56.661148 --- ParallelTerminationStrategy: PID 22646 died... 22:10:56.717214 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22646): Terminated: ok {rc=0} 22:10:56.727333 --- ParallelTerminationStrategy: PID 22649 died... 22:10:56.782712 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22649): Terminated: ok {rc=0} 22:10:56.792823 --- ParallelTerminationStrategy: PID 22652 died... 22:10:56.849121 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22652): Terminated: ok {rc=0} 22:10:56.936266 bus /gobi_0: Setting Powered False 22:10:58.042357 bus /gobi_0: Setting Powered False 22:10:59.151678 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=22650): Process ended prematurely: osmo-stp_10.42.42.5(pid=22650) [trial-2365↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22650)]