Failed
gprs:trx-lms+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-lms+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=24522): Process ended prematurely: osmo-stp_10.42.42.5(pid=24522) [trial-2365↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24522)]
Standard Output
---------------------------------------------- trial-2365 gprs:trx-lms+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 22:33:44.309645 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:33:44.320787 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x bts (candidates: 1) 22:33:44.467369 tst cs_paging_gprs_active.py: using LAC 24120 22:33:44.600061 tst cs_paging_gprs_active.py: using RAC 150 22:33:44.725459 tst cs_paging_gprs_active.py: using CellId 24120 22:33:44.853137 tst cs_paging_gprs_active.py: using BVCI 24121 22:33:44.877877 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:33:44.889171 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:33:44.900236 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:33:44.911412 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:33:44.922483 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:33:44.933500 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:33:44.944718 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:33:44.955661 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:33:44.966879 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 22:33:45.087938 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 22:33:45.369454 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 22:33:45.496408 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:33:45.813055 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24512): Launched 22:33:46.137972 run iperf3-srv_10.42.42.10(pid=24513): Launched 22:33:46.341327 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 22:33:46.481382 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:33:46.845352 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24514): Launched 22:33:47.145435 run iperf3-srv_10.42.42.10(pid=24515): Launched 22:33:47.343906 tst cs_paging_gprs_active.py:38: start network... 22:33:47.479124 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:33:47.997965 run create_hlr_db(pid=24516): Launched 22:33:48.184478 bus /gobi_6: Setting Powered False 22:33:49.206112 run create_hlr_db(pid=24516): Terminated: ok {rc=0} 22:33:49.636840 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24518): Launched 22:33:49.960582 run osmo-hlr_10.42.42.2(pid=24519): Launched 22:33:50.081807 run osmo-stp_10.42.42.5: Starting osmo-stp 22:33:50.643783 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24521): Launched 22:33:50.967525 run osmo-stp_10.42.42.5(pid=24522): Launched 22:33:51.085816 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:33:51.648799 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24524): Launched 22:33:51.764822 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:33:52.046878 run patchelf(pid=24526): Launched 22:33:52.238122 run osmo-stp_10.42.42.5(pid=24522): ERR: Terminated: ERROR {rc=1} [trial-2365↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24522)] 22:33:52.376189 run osmo-stp_10.42.42.5(pid=24522): stdout: | (launched: 2022-12-09_22:33:50.809356) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:33:52.514957 run osmo-stp_10.42.42.5(pid=24522): stderr: | �[0;m�[38;5;43m20221209223350998 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209223350998 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209223350999 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209223350999 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209223351001 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209223351001 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209223351002 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:33:52.648829 run osmo-stp_10.42.42.5(pid=24522): stdout: | (launched: 2022-12-09_22:33:50.809356) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:33:52.782379 run osmo-stp_10.42.42.5(pid=24522): stderr: | �[0;m�[38;5;43m20221209223350998 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209223350998 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209223350999 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209223350999 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209223351001 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209223351001 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209223351002 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:33:52.937842 run patchelf(pid=24526): Terminating (SIGINT) 22:33:53.120164 run patchelf(pid=24526): Terminated: ok {rc=0} 22:33:53.153782 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=24522): Process ended prematurely: osmo-stp_10.42.42.5(pid=24522) [trial-2365↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24522)] [trial-2365↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 22:33:53.163669 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 22:33:53.226862 run osmo-hlr_10.42.42.2(pid=24519): ERR: Terminated: ERROR {rc=237} [trial-2365↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=24519)] 22:33:53.278481 run osmo-hlr_10.42.42.2(pid=24519): stdout: | (launched: 2022-12-09_22:33:49.802870) 22:33:53.330924 run osmo-hlr_10.42.42.2(pid=24519): stderr: | �[0;m�[1;31m20221209223350003 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209223350003 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209223350003 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209223350003 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209223350003 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209223350003 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209223350015 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2365/run.2022-12-09_21-44-27/gprs:trx-lms+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209223350024 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209223350024 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209223350024 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:33:53.375448 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24512): Terminating (SIGTERM) 22:33:53.417609 run iperf3-srv_10.42.42.10(pid=24513): Terminating (SIGTERM) 22:33:53.459694 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24514): Terminating (SIGTERM) 22:33:53.501828 run iperf3-srv_10.42.42.10(pid=24515): Terminating (SIGTERM) 22:33:53.543945 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24518): Terminating (SIGTERM) 22:33:53.586132 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24521): Terminating (SIGTERM) 22:33:53.628369 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24524): Terminating (SIGTERM) 22:33:53.638221 --- ParallelTerminationStrategy: PID 24512 died... 22:33:53.694797 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24512): Terminated: ok {rc=0} 22:33:53.705099 --- ParallelTerminationStrategy: PID 24513 died... 22:33:53.761335 run iperf3-srv_10.42.42.10(pid=24513): Terminated {rc=256} 22:33:53.771777 --- ParallelTerminationStrategy: PID 24514 died... 22:33:53.828360 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24514): Terminated: ok {rc=0} 22:33:53.838642 --- ParallelTerminationStrategy: PID 24515 died... 22:33:53.894627 run iperf3-srv_10.42.42.10(pid=24515): Terminated {rc=256} 22:33:53.904671 --- ParallelTerminationStrategy: PID 24518 died... 22:33:53.961261 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24518): Terminated: ok {rc=0} 22:33:53.971746 --- ParallelTerminationStrategy: PID 24521 died... 22:33:54.028266 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24521): Terminated: ok {rc=0} 22:33:54.038574 --- ParallelTerminationStrategy: PID 24524 died... 22:33:54.094279 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24524): Terminated: ok {rc=0} 22:33:54.182109 bus /gobi_0: Setting Powered False 22:33:55.288202 bus /gobi_0: Setting Powered False 22:33:56.399072 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=24522): Process ended prematurely: osmo-stp_10.42.42.5(pid=24522) [trial-2365↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24522)]