Failed
gprs:oc2g+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=29712): Process ended prematurely: osmo-stp_10.42.42.5(pid=29712) [trial-2366↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29712)]
Standard Output
---------------------------------------------- trial-2366 gprs:oc2g+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 23:28:14.478214 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:28:14.489011 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 23:28:14.629636 tst cs_paging_gprs_active.py: using LAC 24407 23:28:14.744160 tst cs_paging_gprs_active.py: using RAC 182 23:28:14.858354 tst cs_paging_gprs_active.py: using CellId 24407 23:28:14.973142 tst cs_paging_gprs_active.py: using BVCI 24408 23:28:14.995778 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:28:15.006714 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:28:15.017343 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:28:15.027941 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:28:15.038518 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:28:15.049174 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:28:15.059932 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:28:15.070478 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:28:15.081232 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 23:28:15.199254 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 23:28:15.472416 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 23:28:15.595722 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:28:15.941630 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29702): Launched 23:28:16.321101 run iperf3-srv_10.42.42.10(pid=29703): Launched 23:28:16.536386 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 23:28:16.674699 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:28:17.031181 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29704): Launched 23:28:17.307896 run iperf3-srv_10.42.42.10(pid=29705): Launched 23:28:17.503179 tst cs_paging_gprs_active.py:38: start network... 23:28:17.636141 run osmo-hlr_10.42.42.2: Starting osmo-hlr 23:28:18.135960 run create_hlr_db(pid=29706): Launched 23:28:18.319827 bus /gobi_6: Setting Powered False 23:28:19.340806 run create_hlr_db(pid=29706): Terminated: ok {rc=0} 23:28:19.739665 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29708): Launched 23:28:20.035841 run osmo-hlr_10.42.42.2(pid=29709): Launched 23:28:20.144761 run osmo-stp_10.42.42.5: Starting osmo-stp 23:28:20.657872 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29711): Launched 23:28:20.953622 run osmo-stp_10.42.42.5(pid=29712): Launched 23:28:21.061332 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 23:28:21.577545 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29714): Launched 23:28:21.683081 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 23:28:21.941416 run patchelf(pid=29715): Launched 23:28:22.114612 run osmo-stp_10.42.42.5(pid=29712): ERR: Terminated: ERROR {rc=1} [trial-2366↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29712)] 23:28:22.241528 run osmo-stp_10.42.42.5(pid=29712): stdout: | (launched: 2022-12-09_23:28:20.808522) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:28:22.368911 run osmo-stp_10.42.42.5(pid=29712): stderr: | �[0;m�[38;5;43m20221209232820979 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209232820979 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209232820979 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209232820979 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209232820980 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209232820980 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209232820980 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:28:22.491653 run osmo-stp_10.42.42.5(pid=29712): stdout: | (launched: 2022-12-09_23:28:20.808522) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:28:22.612900 run osmo-stp_10.42.42.5(pid=29712): stderr: | �[0;m�[38;5;43m20221209232820979 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209232820979 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209232820979 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209232820979 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209232820980 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209232820980 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209232820980 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:28:22.754652 run patchelf(pid=29715): Terminating (SIGINT) 23:28:22.921886 run patchelf(pid=29715): Terminated: ok {rc=0} 23:28:22.952669 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=29712): Process ended prematurely: osmo-stp_10.42.42.5(pid=29712) [trial-2366↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29712)] [trial-2366↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 23:28:22.962027 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 23:28:23.021039 run osmo-hlr_10.42.42.2(pid=29709): ERR: Terminated: ERROR {rc=237} [trial-2366↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=29709)] 23:28:23.069268 run osmo-hlr_10.42.42.2(pid=29709): stdout: | (launched: 2022-12-09_23:28:19.891179) 23:28:23.118361 run osmo-hlr_10.42.42.2(pid=29709): stderr: | �[0;m�[1;31m20221209232820068 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209232820068 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209232820068 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209232820068 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209232820069 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209232820069 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209232820081 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2366/run.2022-12-09_23-11-33/gprs:oc2g+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209232820090 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209232820090 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209232820090 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 23:28:23.160039 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29702): Terminating (SIGTERM) 23:28:23.199147 run iperf3-srv_10.42.42.10(pid=29703): Terminating (SIGTERM) 23:28:23.238398 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29704): Terminating (SIGTERM) 23:28:23.277625 run iperf3-srv_10.42.42.10(pid=29705): Terminating (SIGTERM) 23:28:23.316934 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29708): Terminating (SIGTERM) 23:28:23.356158 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29711): Terminating (SIGTERM) 23:28:23.395185 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29714): Terminating (SIGTERM) 23:28:23.403764 --- ParallelTerminationStrategy: PID 29702 died... 23:28:23.456052 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29702): Terminated: ok {rc=0} 23:28:23.465390 --- ParallelTerminationStrategy: PID 29703 died... 23:28:23.517061 run iperf3-srv_10.42.42.10(pid=29703): Terminated {rc=256} 23:28:23.526383 --- ParallelTerminationStrategy: PID 29704 died... 23:28:23.578225 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29704): Terminated: ok {rc=0} 23:28:23.587477 --- ParallelTerminationStrategy: PID 29705 died... 23:28:23.639415 run iperf3-srv_10.42.42.10(pid=29705): Terminated {rc=256} 23:28:23.648761 --- ParallelTerminationStrategy: PID 29708 died... 23:28:23.700868 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29708): Terminated: ok {rc=0} 23:28:23.710273 --- ParallelTerminationStrategy: PID 29711 died... 23:28:23.762852 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29711): Terminated: ok {rc=0} 23:28:23.772220 --- ParallelTerminationStrategy: PID 29714 died... 23:28:23.824185 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29714): Terminated: ok {rc=0} 23:28:23.909752 bus /gobi_0: Setting Powered False 23:28:25.015036 bus /gobi_0: Setting Powered False 23:28:26.122604 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=29712): Process ended prematurely: osmo-stp_10.42.42.5(pid=29712) [trial-2366↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29712)]