Failed
gprs:oc2g+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=29573): Process ended prematurely: osmo-stp_10.42.42.5(pid=29573) [trial-2366↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29573)]
Standard Output
---------------------------------------------- trial-2366 gprs:oc2g+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 23:26:15.989529 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:26:16.001634 tst gprs:oc2g+mod-bts0-egprs: Using 1 x bts (candidates: 1) 23:26:16.135965 tst cs_paging_gprs_active.py: using LAC 24397 23:26:16.287017 tst cs_paging_gprs_active.py: using RAC 172 23:26:16.420284 tst cs_paging_gprs_active.py: using CellId 24397 23:26:16.546479 tst cs_paging_gprs_active.py: using BVCI 24398 23:26:16.571777 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:26:16.584226 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:26:16.596768 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:26:16.609298 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:26:16.622244 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:26:16.635214 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:26:16.648236 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:26:16.660118 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:26:16.672245 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 23:26:16.792939 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 23:26:17.141852 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 23:26:17.268704 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:26:17.575389 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29563): Launched 23:26:17.827840 run iperf3-srv_10.42.42.10(pid=29564): Launched 23:26:18.007512 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 23:26:18.130426 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:26:18.435728 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29565): Launched 23:26:18.687803 run iperf3-srv_10.42.42.10(pid=29566): Launched 23:26:18.867847 tst cs_paging_gprs_active.py:38: start network... 23:26:18.990716 run osmo-hlr_10.42.42.2: Starting osmo-hlr 23:26:19.463751 run create_hlr_db(pid=29567): Launched 23:26:19.633350 bus /gobi_6: Setting Powered False 23:26:20.655548 run create_hlr_db(pid=29567): Terminated: ok {rc=0} 23:26:21.074985 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29569): Launched 23:26:21.390884 run osmo-hlr_10.42.42.2(pid=29570): Launched 23:26:21.510758 run osmo-stp_10.42.42.5: Starting osmo-stp 23:26:22.058573 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29572): Launched 23:26:22.374708 run osmo-stp_10.42.42.5(pid=29573): Launched 23:26:22.489578 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 23:26:23.039179 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29575): Launched 23:26:23.152274 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 23:26:23.427857 run patchelf(pid=29576): Launched 23:26:23.613162 run osmo-stp_10.42.42.5(pid=29573): ERR: Terminated: ERROR {rc=1} [trial-2366↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29573)] 23:26:23.748620 run osmo-stp_10.42.42.5(pid=29573): stdout: | (launched: 2022-12-09_23:26:22.219736) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:26:23.884876 run osmo-stp_10.42.42.5(pid=29573): stderr: | �[0;m�[38;5;43m20221209232622411 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209232622411 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209232622411 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209232622412 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209232622412 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209232622412 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209232622412 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:26:24.016023 run osmo-stp_10.42.42.5(pid=29573): stdout: | (launched: 2022-12-09_23:26:22.219736) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:26:24.146176 run osmo-stp_10.42.42.5(pid=29573): stderr: | �[0;m�[38;5;43m20221209232622411 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209232622411 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209232622411 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209232622412 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209232622412 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209232622412 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209232622412 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:26:24.298006 run patchelf(pid=29576): Terminating (SIGINT) 23:26:24.476167 run patchelf(pid=29576): Terminated: ok {rc=0} 23:26:24.508820 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=29573): Process ended prematurely: osmo-stp_10.42.42.5(pid=29573) [trial-2366↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29573)] [trial-2366↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 23:26:24.518713 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 23:26:24.581834 run osmo-hlr_10.42.42.2(pid=29570): ERR: Terminated: ERROR {rc=237} [trial-2366↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=29570)] 23:26:24.633405 run osmo-hlr_10.42.42.2(pid=29570): stdout: | (launched: 2022-12-09_23:26:21.236158) 23:26:24.685899 run osmo-hlr_10.42.42.2(pid=29570): stderr: | �[0;m�[1;31m20221209232621433 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209232621433 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209232621433 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209232621433 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209232621433 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209232621433 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209232621446 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2366/run.2022-12-09_23-11-33/gprs:oc2g+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209232621454 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209232621455 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209232621455 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 23:26:24.730266 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29563): Terminating (SIGTERM) 23:26:24.772224 run iperf3-srv_10.42.42.10(pid=29564): Terminating (SIGTERM) 23:26:24.814497 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29565): Terminating (SIGTERM) 23:26:24.856419 run iperf3-srv_10.42.42.10(pid=29566): Terminating (SIGTERM) 23:26:24.898836 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29569): Terminating (SIGTERM) 23:26:24.940689 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29572): Terminating (SIGTERM) 23:26:24.982872 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29575): Terminating (SIGTERM) 23:26:24.992675 --- ParallelTerminationStrategy: PID 29563 died... 23:26:25.048320 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29563): Terminated: ok {rc=0} 23:26:25.058443 --- ParallelTerminationStrategy: PID 29564 died... 23:26:25.113333 run iperf3-srv_10.42.42.10(pid=29564): Terminated {rc=256} 23:26:25.123352 --- ParallelTerminationStrategy: PID 29565 died... 23:26:25.178326 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29565): Terminated: ok {rc=0} 23:26:25.188125 --- ParallelTerminationStrategy: PID 29566 died... 23:26:25.243526 run iperf3-srv_10.42.42.10(pid=29566): Terminated {rc=256} 23:26:25.253650 --- ParallelTerminationStrategy: PID 29569 died... 23:26:25.308700 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29569): Terminated: ok {rc=0} 23:26:25.318802 --- ParallelTerminationStrategy: PID 29572 died... 23:26:25.374162 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29572): Terminated: ok {rc=0} 23:26:25.384017 --- ParallelTerminationStrategy: PID 29575 died... 23:26:25.439394 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29575): Terminated: ok {rc=0} 23:26:25.525624 bus /gobi_0: Setting Powered False 23:26:26.631083 bus /gobi_0: Setting Powered False 23:26:27.749293 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=29573): Process ended prematurely: osmo-stp_10.42.42.5(pid=29573) [trial-2366↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29573)]