Failed
gprs:oc2g+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=22800): Process ended prematurely: osmo-stp_10.42.42.5(pid=22800) [trial-2369↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22800)]
Standard Output
---------------------------------------------- trial-2369 gprs:oc2g+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 03:49:08.497558 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:49:08.508055 tst gprs:oc2g+mod-bts0-egprs: Using 1 x bts (candidates: 1) 03:49:08.629195 tst cs_paging_gprs_active.py: using LAC 25780 03:49:08.742944 tst cs_paging_gprs_active.py: using RAC 25 03:49:08.855687 tst cs_paging_gprs_active.py: using CellId 25780 03:49:08.971767 tst cs_paging_gprs_active.py: using BVCI 25781 03:49:08.993887 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:49:09.004433 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:49:09.014835 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:49:09.025430 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:49:09.035881 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:49:09.046461 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:49:09.057246 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:49:09.067767 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:49:09.078497 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 03:49:09.195710 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 03:49:09.464879 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 03:49:09.586877 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:49:09.888321 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22790): Launched 03:49:10.138994 run iperf3-srv_10.42.42.10(pid=22791): Launched 03:49:10.316448 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 03:49:10.437885 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:49:10.739696 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22792): Launched 03:49:10.989090 run iperf3-srv_10.42.42.10(pid=22793): Launched 03:49:11.166787 tst cs_paging_gprs_active.py:38: start network... 03:49:11.287253 run osmo-hlr_10.42.42.2: Starting osmo-hlr 03:49:11.745965 run create_hlr_db(pid=22794): Launched 03:49:11.941334 bus /gobi_6: Setting Powered False 03:49:12.946623 run create_hlr_db(pid=22794): Terminated: ok {rc=0} 03:49:13.348698 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22796): Launched 03:49:13.640596 run osmo-hlr_10.42.42.2(pid=22797): Launched 03:49:13.751726 run osmo-stp_10.42.42.5: Starting osmo-stp 03:49:14.259355 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22799): Launched 03:49:14.551742 run osmo-stp_10.42.42.5(pid=22800): Launched 03:49:14.659068 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 03:49:15.167074 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22802): Launched 03:49:15.270836 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 03:49:15.525066 run patchelf(pid=22803): Launched 03:49:15.695973 run osmo-stp_10.42.42.5(pid=22800): ERR: Terminated: ERROR {rc=1} [trial-2369↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22800)] 03:49:15.821576 run osmo-stp_10.42.42.5(pid=22800): stdout: | (launched: 2022-12-10_03:49:14.407127) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:49:15.970701 run osmo-stp_10.42.42.5(pid=22800): stderr: | �[0;m�[38;5;43m20221210034914576 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210034914576 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210034914577 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210034914577 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210034914578 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210034914578 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210034914578 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:49:16.103674 run osmo-stp_10.42.42.5(pid=22800): stdout: | (launched: 2022-12-10_03:49:14.407127) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:49:16.235698 run osmo-stp_10.42.42.5(pid=22800): stderr: | �[0;m�[38;5;43m20221210034914576 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210034914576 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210034914577 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210034914577 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210034914578 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210034914578 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210034914578 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:49:16.390224 run patchelf(pid=22803): Terminating (SIGINT) 03:49:16.569928 run patchelf(pid=22803): Terminated: ok {rc=0} 03:49:16.603468 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=22800): Process ended prematurely: osmo-stp_10.42.42.5(pid=22800) [trial-2369↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22800)] [trial-2369↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 03:49:16.614642 tst cs_paging_gprs_active.py:38: Test FAILED (8.1 sec) 03:49:16.680516 run osmo-hlr_10.42.42.2(pid=22797): ERR: Terminated: ERROR {rc=237} [trial-2369↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=22797)] 03:49:16.733848 run osmo-hlr_10.42.42.2(pid=22797): stdout: | (launched: 2022-12-10_03:49:13.496284) 03:49:16.788754 run osmo-hlr_10.42.42.2(pid=22797): stderr: | �[0;m�[1;31m20221210034913669 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210034913669 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210034913669 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210034913669 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210034913669 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210034913669 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210034913681 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2369/run.2022-12-10_03-34-39/gprs:oc2g+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210034913690 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210034913690 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210034913690 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 03:49:16.834240 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22790): Terminating (SIGTERM) 03:49:16.879221 run iperf3-srv_10.42.42.10(pid=22791): Terminating (SIGTERM) 03:49:16.925083 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22792): Terminating (SIGTERM) 03:49:16.968407 run iperf3-srv_10.42.42.10(pid=22793): Terminating (SIGTERM) 03:49:17.014286 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22796): Terminating (SIGTERM) 03:49:17.059795 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22799): Terminating (SIGTERM) 03:49:17.104283 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22802): Terminating (SIGTERM) 03:49:17.114603 --- ParallelTerminationStrategy: PID 22790 died... 03:49:17.173770 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22790): Terminated: ok {rc=0} 03:49:17.184109 --- ParallelTerminationStrategy: PID 22791 died... 03:49:17.239465 run iperf3-srv_10.42.42.10(pid=22791): Terminated {rc=256} 03:49:17.249498 --- ParallelTerminationStrategy: PID 22792 died... 03:49:17.304269 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22792): Terminated: ok {rc=0} 03:49:17.314506 --- ParallelTerminationStrategy: PID 22793 died... 03:49:17.369546 run iperf3-srv_10.42.42.10(pid=22793): Terminated {rc=256} 03:49:17.379490 --- ParallelTerminationStrategy: PID 22796 died... 03:49:17.434136 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22796): Terminated: ok {rc=0} 03:49:17.444069 --- ParallelTerminationStrategy: PID 22799 died... 03:49:17.499261 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22799): Terminated: ok {rc=0} 03:49:17.509352 --- ParallelTerminationStrategy: PID 22802 died... 03:49:17.564519 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22802): Terminated: ok {rc=0} 03:49:17.650124 bus /gobi_0: Setting Powered False 03:49:18.755267 bus /gobi_0: Setting Powered False 03:49:19.861853 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=22800): Process ended prematurely: osmo-stp_10.42.42.5(pid=22800) [trial-2369↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22800)]