Failed
gprs:trx-b200+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=23669): Process ended prematurely: osmo-stp_10.42.42.5(pid=23669) [trial-2369↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23669)]
Standard Output
---------------------------------------------- trial-2369 gprs:trx-b200+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 03:57:39.728696 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:57:39.739433 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x bts (candidates: 1) 03:57:39.877321 tst cs_paging_gprs_active.py: using LAC 25826 03:57:40.004461 tst cs_paging_gprs_active.py: using RAC 71 03:57:40.130641 tst cs_paging_gprs_active.py: using CellId 25826 03:57:40.257855 tst cs_paging_gprs_active.py: using BVCI 25827 03:57:40.283305 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:57:40.294860 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:57:40.306191 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:57:40.317700 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:57:40.329127 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:57:40.340377 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:57:40.352351 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:57:40.363517 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:57:40.374906 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 03:57:40.490617 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 03:57:40.785433 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 03:57:40.920818 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:57:41.254850 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23659): Launched 03:57:41.533425 run iperf3-srv_10.42.42.10(pid=23660): Launched 03:57:41.732526 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 03:57:41.867863 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:57:42.203569 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23661): Launched 03:57:42.481818 run iperf3-srv_10.42.42.10(pid=23662): Launched 03:57:42.680488 tst cs_paging_gprs_active.py:38: start network... 03:57:42.815870 run osmo-hlr_10.42.42.2: Starting osmo-hlr 03:57:43.332141 run create_hlr_db(pid=23663): Launched 03:57:43.519458 bus /gobi_6: Setting Powered False 03:57:44.541181 run create_hlr_db(pid=23663): Terminated: ok {rc=0} 03:57:44.948752 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23665): Launched 03:57:45.253980 run osmo-hlr_10.42.42.2(pid=23666): Launched 03:57:45.372908 run osmo-stp_10.42.42.5: Starting osmo-stp 03:57:45.934378 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23668): Launched 03:57:46.363496 run osmo-stp_10.42.42.5(pid=23669): Launched 03:57:46.599230 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 03:57:47.217342 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23671): Launched 03:57:47.327099 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 03:57:47.593081 run patchelf(pid=23672): Launched 03:57:47.771187 run osmo-stp_10.42.42.5(pid=23669): ERR: Terminated: ERROR {rc=1} [trial-2369↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23669)] 03:57:47.901754 run osmo-stp_10.42.42.5(pid=23669): stdout: | (launched: 2022-12-10_03:57:46.110214) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:57:48.032505 run osmo-stp_10.42.42.5(pid=23669): stderr: | �[0;m�[38;5;43m20221210035746435 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210035746436 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210035746436 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210035746436 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210035746449 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210035746449 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210035746449 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:57:48.158698 run osmo-stp_10.42.42.5(pid=23669): stdout: | (launched: 2022-12-10_03:57:46.110214) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:57:48.283387 run osmo-stp_10.42.42.5(pid=23669): stderr: | �[0;m�[38;5;43m20221210035746435 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210035746436 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210035746436 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210035746436 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210035746449 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210035746449 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210035746449 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:57:48.429403 run patchelf(pid=23672): Terminating (SIGINT) 03:57:48.600876 run patchelf(pid=23672): Terminated: ok {rc=0} 03:57:48.632558 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=23669): Process ended prematurely: osmo-stp_10.42.42.5(pid=23669) [trial-2369↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23669)] [trial-2369↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 03:57:48.642003 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 03:57:48.702153 run osmo-hlr_10.42.42.2(pid=23666): ERR: Terminated: ERROR {rc=237} [trial-2369↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=23666)] 03:57:48.750935 run osmo-hlr_10.42.42.2(pid=23666): stdout: | (launched: 2022-12-10_03:57:45.103706) 03:57:48.800178 run osmo-hlr_10.42.42.2(pid=23666): stderr: | �[0;m�[1;31m20221210035745280 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210035745280 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210035745280 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210035745280 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210035745280 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210035745280 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210035745294 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2369/run.2022-12-10_03-34-39/gprs:trx-b200+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210035745304 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210035745304 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210035745304 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 03:57:48.842138 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23659): Terminating (SIGTERM) 03:57:48.882090 run iperf3-srv_10.42.42.10(pid=23660): Terminating (SIGTERM) 03:57:48.921591 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23661): Terminating (SIGTERM) 03:57:48.961133 run iperf3-srv_10.42.42.10(pid=23662): Terminating (SIGTERM) 03:57:49.001291 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23665): Terminating (SIGTERM) 03:57:49.041233 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23668): Terminating (SIGTERM) 03:57:49.081268 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23671): Terminating (SIGTERM) 03:57:49.090680 --- ParallelTerminationStrategy: PID 23659 died... 03:57:49.143558 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23659): Terminated: ok {rc=0} 03:57:49.153294 --- ParallelTerminationStrategy: PID 23660 died... 03:57:49.205515 run iperf3-srv_10.42.42.10(pid=23660): Terminated {rc=256} 03:57:49.215133 --- ParallelTerminationStrategy: PID 23661 died... 03:57:49.267493 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23661): Terminated: ok {rc=0} 03:57:49.277096 --- ParallelTerminationStrategy: PID 23662 died... 03:57:49.329234 run iperf3-srv_10.42.42.10(pid=23662): Terminated {rc=256} 03:57:49.338890 --- ParallelTerminationStrategy: PID 23665 died... 03:57:49.391198 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23665): Terminated: ok {rc=0} 03:57:49.401030 --- ParallelTerminationStrategy: PID 23668 died... 03:57:49.453451 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23668): Terminated: ok {rc=0} 03:57:49.463051 --- ParallelTerminationStrategy: PID 23671 died... 03:57:49.515940 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23671): Terminated: ok {rc=0} 03:57:49.604473 bus /gobi_0: Setting Powered False 03:57:50.706890 bus /gobi_0: Setting Powered False 03:57:51.816798 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=23669): Process ended prematurely: osmo-stp_10.42.42.5(pid=23669) [trial-2369↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23669)]