Failed
gprs:trx-lms+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-lms+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=3605): Process ended prematurely: osmo-stp_10.42.42.5(pid=3605) [trial-2370↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3605)]
Standard Output
---------------------------------------------- trial-2370 gprs:trx-lms+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 06:16:55.683566 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:16:55.694728 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x bts (candidates: 1) 06:16:55.842684 tst cs_paging_gprs_active.py: using LAC 26425 06:16:55.964568 tst cs_paging_gprs_active.py: using RAC 160 06:16:56.086388 tst cs_paging_gprs_active.py: using CellId 26425 06:16:56.207902 tst cs_paging_gprs_active.py: using BVCI 26426 06:16:56.232061 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:16:56.243237 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:16:56.254275 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:16:56.265343 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:16:56.276419 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:16:56.287530 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:16:56.298810 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:16:56.309805 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:16:56.320773 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 06:16:56.435682 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 06:16:56.706652 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 06:16:56.829092 run iperf3-srv_10.42.42.10: Starting iperf3-srv 06:16:57.134619 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3592): Launched 06:16:57.388247 run iperf3-srv_10.42.42.10(pid=3593): Launched 06:16:57.567147 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 06:16:57.689212 run iperf3-srv_10.42.42.10: Starting iperf3-srv 06:16:57.994949 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3594): Launched 06:16:58.248256 run iperf3-srv_10.42.42.10(pid=3595): Launched 06:16:58.427473 tst cs_paging_gprs_active.py:38: start network... 06:16:58.549596 run osmo-hlr_10.42.42.2: Starting osmo-hlr 06:16:59.012652 run create_hlr_db(pid=3596): Launched 06:16:59.180909 bus /gobi_6: Setting Powered False 06:17:00.203459 run create_hlr_db(pid=3596): Terminated: ok {rc=0} 06:17:00.621581 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3598): Launched 06:17:01.053442 run osmo-hlr_10.42.42.2(pid=3599): Launched 06:17:01.203131 run osmo-stp_10.42.42.5: Starting osmo-stp 06:17:01.888303 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3601): Launched 06:17:02.227108 run osmo-stp_10.42.42.5(pid=3605): Launched 06:17:02.375043 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 06:17:02.901835 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3607): Launched 06:17:03.006191 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 06:17:03.263315 run patchelf(pid=3608): Launched 06:17:03.437787 run osmo-stp_10.42.42.5(pid=3605): ERR: Terminated: ERROR {rc=1} [trial-2370↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3605)] 06:17:03.564100 run osmo-stp_10.42.42.5(pid=3605): stdout: | (launched: 2022-12-10_06:17:02.053265) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:17:03.690786 run osmo-stp_10.42.42.5(pid=3605): stderr: | �[0;m�[38;5;43m20221210061702451 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210061702452 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210061702452 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210061702452 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210061702453 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210061702453 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210061702453 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:17:03.813147 run osmo-stp_10.42.42.5(pid=3605): stdout: | (launched: 2022-12-10_06:17:02.053265) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:17:03.934559 run osmo-stp_10.42.42.5(pid=3605): stderr: | �[0;m�[38;5;43m20221210061702451 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210061702452 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210061702452 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210061702452 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210061702453 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210061702453 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210061702453 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:17:04.075475 run patchelf(pid=3608): Terminating (SIGINT) 06:17:04.241444 run patchelf(pid=3608): Terminated: ok {rc=0} 06:17:04.272131 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=3605): Process ended prematurely: osmo-stp_10.42.42.5(pid=3605) [trial-2370↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3605)] [trial-2370↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 06:17:04.281380 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 06:17:04.341654 run osmo-hlr_10.42.42.2(pid=3599): ERR: Terminated: ERROR {rc=237} [trial-2370↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=3599)] 06:17:04.390531 run osmo-hlr_10.42.42.2(pid=3599): stdout: | (launched: 2022-12-10_06:17:00.782044) 06:17:04.439720 run osmo-hlr_10.42.42.2(pid=3599): stderr: | �[0;m�[1;31m20221210061701094 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210061701094 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210061701094 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210061701094 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210061701094 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210061701094 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210061701114 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2370/run.2022-12-10_05-27-43/gprs:trx-lms+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210061701136 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210061701136 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210061701136 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 06:17:04.481459 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3592): Terminating (SIGTERM) 06:17:04.520924 run iperf3-srv_10.42.42.10(pid=3593): Terminating (SIGTERM) 06:17:04.560422 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3594): Terminating (SIGTERM) 06:17:04.599655 run iperf3-srv_10.42.42.10(pid=3595): Terminating (SIGTERM) 06:17:04.639004 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3598): Terminating (SIGTERM) 06:17:04.678444 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3601): Terminating (SIGTERM) 06:17:04.717993 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3607): Terminating (SIGTERM) 06:17:04.727286 --- ParallelTerminationStrategy: PID 3592 died... 06:17:04.780092 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3592): Terminated: ok {rc=0} 06:17:04.789808 --- ParallelTerminationStrategy: PID 3593 died... 06:17:04.842095 run iperf3-srv_10.42.42.10(pid=3593): Terminated {rc=256} 06:17:04.851802 --- ParallelTerminationStrategy: PID 3594 died... 06:17:04.904134 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3594): Terminated: ok {rc=0} 06:17:04.913962 --- ParallelTerminationStrategy: PID 3595 died... 06:17:04.966508 run iperf3-srv_10.42.42.10(pid=3595): Terminated {rc=256} 06:17:04.976059 --- ParallelTerminationStrategy: PID 3598 died... 06:17:05.028022 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3598): Terminated: ok {rc=0} 06:17:05.037940 --- ParallelTerminationStrategy: PID 3601 died... 06:17:05.090322 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3601): Terminated: ok {rc=0} 06:17:05.100135 --- ParallelTerminationStrategy: PID 3607 died... 06:17:05.152479 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3607): Terminated: ok {rc=0} 06:17:05.240232 bus /gobi_0: Setting Powered False 06:17:06.344832 bus /gobi_0: Setting Powered False 06:17:07.451856 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=3605): Process ended prematurely: osmo-stp_10.42.42.5(pid=3605) [trial-2370↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3605)]