Failed
gprs:trx-lms-limenet-micro.iperf3.py (from gprs_trx-lms-limenet-micro)
Stacktrace
osmo-stp_10.42.42.5(pid=4371): Process ended prematurely: osmo-stp_10.42.42.5(pid=4371) [trial-2370↪gprs:trx-lms-limenet-micro↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4371)]
Standard Output
---------------------------------------------- trial-2370 gprs:trx-lms-limenet-micro iperf3.py ---------------------------------------------- 06:23:55.663828 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 06:23:55.675655 tst gprs:trx-lms-limenet-micro: Using 1 x bts (candidates: 1) 06:23:55.809116 tst iperf3.py: using LAC 26463 06:23:55.930406 tst iperf3.py: using RAC 198 06:23:56.053448 tst iperf3.py: using CellId 26463 06:23:56.179129 tst iperf3.py: using BVCI 26464 06:23:56.203591 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 06:23:56.214790 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 06:23:56.225749 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 06:23:56.236657 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 06:23:56.247506 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 06:23:56.258486 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 06:23:56.269631 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 06:23:56.280434 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 06:23:56.291502 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 06:23:56.577976 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 06:23:56.709359 run iperf3-srv_10.42.42.10: Starting iperf3-srv 06:23:57.037483 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4363): Launched 06:23:57.309332 run iperf3-srv_10.42.42.10(pid=4364): Launched 06:23:57.502702 tst iperf3.py:8: start network... 06:23:57.635043 run osmo-hlr_10.42.42.2: Starting osmo-hlr 06:23:58.137809 run create_hlr_db(pid=4365): Launched 06:23:58.307761 bus /gobi_6: Setting Powered False 06:23:59.327982 run create_hlr_db(pid=4365): Terminated: ok {rc=0} 06:23:59.721095 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4367): Launched 06:24:00.016394 run osmo-hlr_10.42.42.2(pid=4368): Launched 06:24:00.127514 run osmo-stp_10.42.42.5: Starting osmo-stp 06:24:00.650237 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4370): Launched 06:24:01.045358 run osmo-stp_10.42.42.5(pid=4371): Launched 06:24:01.359397 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 06:24:01.959088 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4373): Launched 06:24:02.076676 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 06:24:02.371406 run patchelf(pid=4374): Launched 06:24:02.557565 run osmo-stp_10.42.42.5(pid=4371): ERR: Terminated: ERROR {rc=1} [trial-2370↪gprs:trx-lms-limenet-micro↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4371)] 06:24:02.693529 run osmo-stp_10.42.42.5(pid=4371): stdout: | (launched: 2022-12-10_06:24:00.798774) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:24:02.830128 run osmo-stp_10.42.42.5(pid=4371): stderr: | �[0;m�[38;5;43m20221210062401156 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210062401156 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210062401157 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210062401158 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210062401158 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210062401158 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210062401158 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:24:02.962002 run osmo-stp_10.42.42.5(pid=4371): stdout: | (launched: 2022-12-10_06:24:00.798774) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:24:03.092637 run osmo-stp_10.42.42.5(pid=4371): stderr: | �[0;m�[38;5;43m20221210062401156 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210062401156 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210062401157 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210062401158 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210062401158 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210062401158 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210062401158 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:24:03.243988 run patchelf(pid=4374): Terminating (SIGINT) 06:24:03.422192 run patchelf(pid=4374): Terminated: ok {rc=0} 06:24:03.454888 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=4371): Process ended prematurely: osmo-stp_10.42.42.5(pid=4371) [trial-2370↪gprs:trx-lms-limenet-micro↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4371)] [trial-2370↪gprs:trx-lms-limenet-micro↪iperf3.py:8] 06:24:03.464790 tst iperf3.py:8: Test FAILED (7.8 sec) 06:24:03.528471 run osmo-hlr_10.42.42.2(pid=4368): ERR: Terminated: ERROR {rc=237} [trial-2370↪gprs:trx-lms-limenet-micro↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=4368)] 06:24:03.579506 run osmo-hlr_10.42.42.2(pid=4368): stdout: | (launched: 2022-12-10_06:23:59.870261) 06:24:03.631321 run osmo-hlr_10.42.42.2(pid=4368): stderr: | �[0;m�[1;31m20221210062400046 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210062400046 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210062400046 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210062400046 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210062400046 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210062400046 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210062400058 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2370/run.2022-12-10_05-27-43/gprs:trx-lms-limenet-micro/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210062400068 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210062400068 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210062400068 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 06:24:03.675253 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4363): Terminating (SIGTERM) 06:24:03.717396 run iperf3-srv_10.42.42.10(pid=4364): Terminating (SIGTERM) 06:24:03.759084 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4367): Terminating (SIGTERM) 06:24:03.800604 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4370): Terminating (SIGTERM) 06:24:03.842218 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4373): Terminating (SIGTERM) 06:24:03.852392 --- ParallelTerminationStrategy: PID 4363 died... 06:24:03.908363 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4363): Terminated: ok {rc=0} 06:24:03.919029 --- ParallelTerminationStrategy: PID 4364 died... 06:24:03.975483 run iperf3-srv_10.42.42.10(pid=4364): Terminated {rc=256} 06:24:03.985647 --- ParallelTerminationStrategy: PID 4367 died... 06:24:04.041619 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4367): Terminated: ok {rc=0} 06:24:04.051621 --- ParallelTerminationStrategy: PID 4370 died... 06:24:04.107736 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4370): Terminated: ok {rc=0} 06:24:04.117991 --- ParallelTerminationStrategy: PID 4373 died... 06:24:04.173901 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4373): Terminated: ok {rc=0} 06:24:04.261224 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=4371): Process ended prematurely: osmo-stp_10.42.42.5(pid=4371) [trial-2370↪gprs:trx-lms-limenet-micro↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4371)]