Failed
dynts:oc2g+mod-bts0-dynts67-osmo.switch_tch_pdch.py (from dynts_oc2g+mod-bts0-dynts67-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=9464): Process ended prematurely: osmo-stp_10.42.42.5(pid=9464) [trial-2371↪dynts:oc2g+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9464)]
Standard Output
---------------------------------------------- trial-2371 dynts:oc2g+mod-bts0-dynts67-osmo switch_tch_pdch.py ---------------------------------------------- 07:12:16.575237 tst dynts:oc2g+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 07:12:16.590293 tst dynts:oc2g+mod-bts0-dynts67-osmo: Using 1 x bts (candidates: 1) 07:12:16.751589 tst switch_tch_pdch.py: using LAC 26718 07:12:16.869837 tst switch_tch_pdch.py: using RAC 198 07:12:16.987245 tst switch_tch_pdch.py: using CellId 26718 07:12:17.105469 tst switch_tch_pdch.py: using BVCI 26719 07:12:17.128856 tst dynts:oc2g+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 07:12:17.140694 tst dynts:oc2g+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 07:12:17.152428 tst dynts:oc2g+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 07:12:17.166027 tst dynts:oc2g+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 07:12:17.178263 tst dynts:oc2g+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 07:12:17.189905 tst dynts:oc2g+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 07:12:17.203773 tst dynts:oc2g+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 07:12:17.216474 tst dynts:oc2g+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2) 07:12:17.343079 tst dynts:oc2g+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2) 07:12:17.611503 tst switch_tch_pdch.py:51: start network... 07:12:17.732757 run osmo-hlr_10.42.42.2: Starting osmo-hlr 07:12:18.162868 run create_hlr_db(pid=9458): Launched 07:12:18.281398 bus /gobi_6: Setting Powered False 07:12:19.351781 run create_hlr_db(pid=9458): Terminated: ok {rc=0} 07:12:19.735765 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9460): Launched 07:12:20.045081 run osmo-hlr_10.42.42.2(pid=9461): Launched 07:12:20.161788 run osmo-stp_10.42.42.5: Starting osmo-stp 07:12:20.672610 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9463): Launched 07:12:20.980336 run osmo-stp_10.42.42.5(pid=9464): Launched 07:12:21.092473 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 07:12:21.604029 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9466): Launched 07:12:21.713913 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 07:12:21.982220 run patchelf(pid=9467): Launched 07:12:22.162362 run osmo-stp_10.42.42.5(pid=9464): ERR: Terminated: ERROR {rc=1} [trial-2371↪dynts:oc2g+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9464)] 07:12:22.294508 run osmo-stp_10.42.42.5(pid=9464): stdout: | (launched: 2022-12-10_07:12:20.829768) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:12:22.427579 run osmo-stp_10.42.42.5(pid=9464): stderr: | �[0;m�[38;5;43m20221210071221018 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210071221018 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210071221018 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210071221018 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210071221021 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210071221021 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210071221021 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:12:22.555476 run osmo-stp_10.42.42.5(pid=9464): stdout: | (launched: 2022-12-10_07:12:20.829768) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:12:22.682500 run osmo-stp_10.42.42.5(pid=9464): stderr: | �[0;m�[38;5;43m20221210071221018 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210071221018 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210071221018 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210071221018 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210071221021 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210071221021 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210071221021 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:12:22.830357 run patchelf(pid=9467): Terminating (SIGINT) 07:12:23.003560 run patchelf(pid=9467): Terminated: ok {rc=0} 07:12:23.035150 tst switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=9464): Process ended prematurely: osmo-stp_10.42.42.5(pid=9464) [trial-2371↪dynts:oc2g+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9464)] [trial-2371↪dynts:oc2g+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54] 07:12:23.044255 tst switch_tch_pdch.py:54: Test FAILED (6.5 sec) 07:12:23.106064 run osmo-hlr_10.42.42.2(pid=9461): ERR: Terminated: ERROR {rc=237} [trial-2371↪dynts:oc2g+mod-bts0-dynts67-osmo↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=9461)] 07:12:23.156731 run osmo-hlr_10.42.42.2(pid=9461): stdout: | (launched: 2022-12-10_07:12:19.893369) 07:12:23.208203 run osmo-hlr_10.42.42.2(pid=9461): stderr: | �[0;m�[1;31m20221210071220089 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210071220089 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210071220089 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210071220089 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210071220089 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210071220089 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210071220101 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2371/run.2022-12-10_06-54-20/dynts:oc2g+mod-bts0-dynts67-osmo/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210071220111 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210071220111 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210071220111 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 07:12:23.252081 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9460): Terminating (SIGTERM) 07:12:23.293514 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9463): Terminating (SIGTERM) 07:12:23.334882 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9466): Terminating (SIGTERM) 07:12:23.344349 --- ParallelTerminationStrategy: PID 9460 died... 07:12:23.399798 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9460): Terminated: ok {rc=0} 07:12:23.409694 --- ParallelTerminationStrategy: PID 9463 died... 07:12:23.464753 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9463): Terminated: ok {rc=0} 07:12:23.474557 --- ParallelTerminationStrategy: PID 9466 died... 07:12:23.529736 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9466): Terminated: ok {rc=0} 07:12:23.616717 bus /gobi_0: Setting Powered False 07:12:24.720351 bus /gobi_0: Setting Powered False 07:12:25.829493 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/dynts/switch_tch_pdch.py", line 54, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=9464): Process ended prematurely: osmo-stp_10.42.42.5(pid=9464) [trial-2371↪dynts:oc2g+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9464)]