Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=14662): Process ended prematurely: osmo-stp_10.42.42.5(pid=14662) [trial-2371↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14662)]
Standard Output
---------------------------------------------- trial-2371 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 08:06:08.325508 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:06:08.337966 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 08:06:08.469764 tst cs_paging_gprs_active.py: using LAC 27009 08:06:08.582228 tst cs_paging_gprs_active.py: using RAC 234 08:06:08.694138 tst cs_paging_gprs_active.py: using CellId 27009 08:06:08.806861 tst cs_paging_gprs_active.py: using BVCI 27010 08:06:08.829228 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:06:08.840453 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:06:08.851600 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:06:08.862707 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:06:08.874114 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:06:08.885783 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:06:08.897374 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:06:08.908437 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:06:08.920036 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 08:06:09.039477 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 08:06:09.325121 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 08:06:09.455187 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:06:09.778487 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14652): Launched 08:06:10.046567 run iperf3-srv_10.42.42.10(pid=14653): Launched 08:06:10.239070 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 08:06:10.369683 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:06:10.692056 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14654): Launched 08:06:10.959433 run iperf3-srv_10.42.42.10(pid=14655): Launched 08:06:11.150999 tst cs_paging_gprs_active.py:38: start network... 08:06:11.280929 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:06:11.781863 run create_hlr_db(pid=14656): Launched 08:06:11.962878 bus /gobi_6: Setting Powered False 08:06:12.985615 run create_hlr_db(pid=14656): Terminated: ok {rc=0} 08:06:13.387072 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14658): Launched 08:06:13.700020 run osmo-hlr_10.42.42.2(pid=14659): Launched 08:06:13.814728 run osmo-stp_10.42.42.5: Starting osmo-stp 08:06:14.357085 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14661): Launched 08:06:14.668501 run osmo-stp_10.42.42.5(pid=14662): Launched 08:06:14.781712 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:06:15.328865 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14664): Launched 08:06:15.440474 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:06:15.712204 run patchelf(pid=14665): Launched 08:06:15.915827 run osmo-stp_10.42.42.5(pid=14662): ERR: Terminated: ERROR {rc=1} [trial-2371↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14662)] 08:06:16.048428 run osmo-stp_10.42.42.5(pid=14662): stdout: | (launched: 2022-12-10_08:06:14.515675) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:06:16.181552 run osmo-stp_10.42.42.5(pid=14662): stderr: | �[0;m�[38;5;43m20221210080614708 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210080614708 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210080614709 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210080614709 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210080614709 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210080614709 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210080614710 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:06:16.308153 run osmo-stp_10.42.42.5(pid=14662): stdout: | (launched: 2022-12-10_08:06:14.515675) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:06:16.435341 run osmo-stp_10.42.42.5(pid=14662): stderr: | �[0;m�[38;5;43m20221210080614708 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210080614708 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210080614709 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210080614709 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210080614709 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210080614709 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210080614710 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:06:16.583370 run patchelf(pid=14665): Terminating (SIGINT) 08:06:16.757502 run patchelf(pid=14665): Terminated: ok {rc=0} 08:06:16.790197 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=14662): Process ended prematurely: osmo-stp_10.42.42.5(pid=14662) [trial-2371↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14662)] [trial-2371↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 08:06:16.800617 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 08:06:16.865763 run osmo-hlr_10.42.42.2(pid=14659): ERR: Terminated: ERROR {rc=237} [trial-2371↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=14659)] 08:06:16.918112 run osmo-hlr_10.42.42.2(pid=14659): stdout: | (launched: 2022-12-10_08:06:13.546540) 08:06:16.970543 run osmo-hlr_10.42.42.2(pid=14659): stderr: | �[0;m�[1;31m20221210080613743 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210080613743 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210080613743 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210080613743 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210080613743 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210080613743 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210080613756 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2371/run.2022-12-10_06-54-20/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210080613764 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210080613765 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210080613765 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:06:17.015450 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14652): Terminating (SIGTERM) 08:06:17.060909 run iperf3-srv_10.42.42.10(pid=14653): Terminating (SIGTERM) 08:06:17.105447 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14654): Terminating (SIGTERM) 08:06:17.151552 run iperf3-srv_10.42.42.10(pid=14655): Terminating (SIGTERM) 08:06:17.193229 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14658): Terminating (SIGTERM) 08:06:17.234022 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14661): Terminating (SIGTERM) 08:06:17.274889 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14664): Terminating (SIGTERM) 08:06:17.284076 --- ParallelTerminationStrategy: PID 14652 died... 08:06:17.338257 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14652): Terminated: ok {rc=0} 08:06:17.348600 --- ParallelTerminationStrategy: PID 14653 died... 08:06:17.402529 run iperf3-srv_10.42.42.10(pid=14653): Terminated {rc=256} 08:06:17.412759 --- ParallelTerminationStrategy: PID 14654 died... 08:06:17.467153 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14654): Terminated: ok {rc=0} 08:06:17.476703 --- ParallelTerminationStrategy: PID 14655 died... 08:06:17.532120 run iperf3-srv_10.42.42.10(pid=14655): Terminated {rc=256} 08:06:17.542005 --- ParallelTerminationStrategy: PID 14658 died... 08:06:17.595563 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14658): Terminated: ok {rc=0} 08:06:17.605426 --- ParallelTerminationStrategy: PID 14661 died... 08:06:17.659188 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14661): Terminated: ok {rc=0} 08:06:17.668873 --- ParallelTerminationStrategy: PID 14664 died... 08:06:17.722438 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14664): Terminated: ok {rc=0} 08:06:17.810009 bus /gobi_0: Setting Powered False 08:06:18.915651 bus /gobi_0: Setting Powered False 08:06:20.023913 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=14662): Process ended prematurely: osmo-stp_10.42.42.5(pid=14662) [trial-2371↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14662)]