Failed
gprs:oc2g+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=9317): Process ended prematurely: osmo-stp_10.42.42.5(pid=9317) [trial-2371↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9317)]
Standard Output
---------------------------------------------- trial-2371 gprs:oc2g+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 07:10:07.882610 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:10:07.893690 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 07:10:08.042985 tst cs_paging_gprs_active.py: using LAC 26707 07:10:08.170310 tst cs_paging_gprs_active.py: using RAC 187 07:10:08.291694 tst cs_paging_gprs_active.py: using CellId 26707 07:10:08.415302 tst cs_paging_gprs_active.py: using BVCI 26708 07:10:08.439352 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:10:08.450526 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:10:08.461461 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:10:08.472536 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:10:08.483499 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:10:08.494535 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:10:08.505703 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:10:08.516577 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:10:08.528036 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 07:10:08.645683 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 07:10:08.934393 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 07:10:09.065533 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:10:09.391330 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9307): Launched 07:10:09.662525 run iperf3-srv_10.42.42.10(pid=9308): Launched 07:10:09.855782 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 07:10:09.987214 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:10:10.312607 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9309): Launched 07:10:10.583897 run iperf3-srv_10.42.42.10(pid=9310): Launched 07:10:10.777114 tst cs_paging_gprs_active.py:38: start network... 07:10:10.908470 run osmo-hlr_10.42.42.2: Starting osmo-hlr 07:10:11.412019 run create_hlr_db(pid=9311): Launched 07:10:11.593854 bus /gobi_6: Setting Powered False 07:10:12.616248 run create_hlr_db(pid=9311): Terminated: ok {rc=0} 07:10:13.010698 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9313): Launched 07:10:13.304820 run osmo-hlr_10.42.42.2(pid=9314): Launched 07:10:13.418367 run osmo-stp_10.42.42.5: Starting osmo-stp 07:10:13.937494 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9316): Launched 07:10:14.229800 run osmo-stp_10.42.42.5(pid=9317): Launched 07:10:14.336625 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 07:10:14.845918 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9319): Launched 07:10:14.950031 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 07:10:15.206572 run patchelf(pid=9320): Launched 07:10:15.379064 run osmo-stp_10.42.42.5(pid=9317): ERR: Terminated: ERROR {rc=1} [trial-2371↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9317)] 07:10:15.504789 run osmo-stp_10.42.42.5(pid=9317): stdout: | (launched: 2022-12-10_07:10:14.085853) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:10:15.631236 run osmo-stp_10.42.42.5(pid=9317): stderr: | �[0;m�[38;5;43m20221210071014253 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210071014253 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210071014254 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210071014254 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210071014255 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210071014255 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210071014255 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:10:15.753099 run osmo-stp_10.42.42.5(pid=9317): stdout: | (launched: 2022-12-10_07:10:14.085853) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:10:15.878730 run osmo-stp_10.42.42.5(pid=9317): stderr: | �[0;m�[38;5;43m20221210071014253 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210071014253 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210071014254 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210071014254 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210071014255 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210071014255 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210071014255 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:10:16.023932 run patchelf(pid=9320): Terminating (SIGINT) 07:10:16.194626 run patchelf(pid=9320): Terminated: ok {rc=0} 07:10:16.226610 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=9317): Process ended prematurely: osmo-stp_10.42.42.5(pid=9317) [trial-2371↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9317)] [trial-2371↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 07:10:16.236542 tst cs_paging_gprs_active.py:38: Test FAILED (8.4 sec) 07:10:16.299367 run osmo-hlr_10.42.42.2(pid=9314): ERR: Terminated: ERROR {rc=237} [trial-2371↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=9314)] 07:10:16.349501 run osmo-hlr_10.42.42.2(pid=9314): stdout: | (launched: 2022-12-10_07:10:13.159307) 07:10:16.401745 run osmo-hlr_10.42.42.2(pid=9314): stderr: | �[0;m�[1;31m20221210071013334 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210071013334 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210071013334 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210071013334 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210071013334 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210071013335 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210071013350 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2371/run.2022-12-10_06-54-20/gprs:oc2g+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210071013360 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210071013361 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210071013361 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 07:10:16.445420 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9307): Terminating (SIGTERM) 07:10:16.486937 run iperf3-srv_10.42.42.10(pid=9308): Terminating (SIGTERM) 07:10:16.531840 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9309): Terminating (SIGTERM) 07:10:16.575022 run iperf3-srv_10.42.42.10(pid=9310): Terminating (SIGTERM) 07:10:16.618018 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9313): Terminating (SIGTERM) 07:10:16.659059 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9316): Terminating (SIGTERM) 07:10:16.702800 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9319): Terminating (SIGTERM) 07:10:16.712344 --- ParallelTerminationStrategy: PID 9307 died... 07:10:16.767488 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9307): Terminated: ok {rc=0} 07:10:16.777720 --- ParallelTerminationStrategy: PID 9308 died... 07:10:16.832328 run iperf3-srv_10.42.42.10(pid=9308): Terminated {rc=256} 07:10:16.842587 --- ParallelTerminationStrategy: PID 9309 died... 07:10:16.897227 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9309): Terminated: ok {rc=0} 07:10:16.907394 --- ParallelTerminationStrategy: PID 9310 died... 07:10:16.961932 run iperf3-srv_10.42.42.10(pid=9310): Terminated {rc=256} 07:10:16.972050 --- ParallelTerminationStrategy: PID 9313 died... 07:10:17.026228 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9313): Terminated: ok {rc=0} 07:10:17.037430 --- ParallelTerminationStrategy: PID 9316 died... 07:10:17.093126 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9316): Terminated: ok {rc=0} 07:10:17.103388 --- ParallelTerminationStrategy: PID 9319 died... 07:10:17.158665 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9319): Terminated: ok {rc=0} 07:10:17.243900 bus /gobi_0: Setting Powered False 07:10:18.350282 bus /gobi_0: Setting Powered False 07:10:19.457867 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=9317): Process ended prematurely: osmo-stp_10.42.42.5(pid=9317) [trial-2371↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9317)]