Failed
gprs:sysmo+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=8567): Process ended prematurely: osmo-stp_10.42.42.5(pid=8567) [trial-2371↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8567)]
Standard Output
---------------------------------------------- trial-2371 gprs:sysmo+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 07:03:13.685962 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:03:13.697431 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 07:03:13.851416 tst cs_paging_gprs_active.py: using LAC 26670 07:03:13.981451 tst cs_paging_gprs_active.py: using RAC 150 07:03:14.113326 tst cs_paging_gprs_active.py: using CellId 26670 07:03:14.246306 tst cs_paging_gprs_active.py: using BVCI 26671 07:03:14.271832 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:03:14.283159 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:03:14.294370 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:03:14.305671 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:03:14.316926 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:03:14.328272 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:03:14.340161 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:03:14.351800 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:03:14.363598 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 07:03:14.483003 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 07:03:14.768078 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 07:03:14.898426 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:03:15.223222 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8557): Launched 07:03:15.492815 run iperf3-srv_10.42.42.10(pid=8558): Launched 07:03:15.683594 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 07:03:15.813459 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:03:16.161458 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8559): Launched 07:03:16.475632 run iperf3-srv_10.42.42.10(pid=8560): Launched 07:03:16.689850 tst cs_paging_gprs_active.py:38: start network... 07:03:16.833302 run osmo-hlr_10.42.42.2: Starting osmo-hlr 07:03:17.377124 run create_hlr_db(pid=8561): Launched 07:03:17.571164 bus /gobi_6: Setting Powered False 07:03:18.592599 run create_hlr_db(pid=8561): Terminated: ok {rc=0} 07:03:19.038199 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8563): Launched 07:03:19.374207 run osmo-hlr_10.42.42.2(pid=8564): Launched 07:03:19.495290 run osmo-stp_10.42.42.5: Starting osmo-stp 07:03:20.074430 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8566): Launched 07:03:20.410565 run osmo-stp_10.42.42.5(pid=8567): Launched 07:03:20.532105 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 07:03:21.116046 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8569): Launched 07:03:21.235673 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 07:03:21.528618 run patchelf(pid=8570): Launched 07:03:21.723946 run osmo-stp_10.42.42.5(pid=8567): ERR: Terminated: ERROR {rc=1} [trial-2371↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8567)] 07:03:21.866306 run osmo-stp_10.42.42.5(pid=8567): stdout: | (launched: 2022-12-10_07:03:20.244487) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:03:22.008609 run osmo-stp_10.42.42.5(pid=8567): stderr: | �[0;m�[38;5;43m20221210070320440 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210070320441 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210070320441 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210070320442 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210070320443 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210070320443 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210070320443 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:03:22.146737 run osmo-stp_10.42.42.5(pid=8567): stdout: | (launched: 2022-12-10_07:03:20.244487) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:03:22.282999 run osmo-stp_10.42.42.5(pid=8567): stderr: | �[0;m�[38;5;43m20221210070320440 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210070320441 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210070320441 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210070320442 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210070320443 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210070320443 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210070320443 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:03:22.443165 run patchelf(pid=8570): Terminating (SIGINT) 07:03:22.630925 run patchelf(pid=8570): Terminated: ok {rc=0} 07:03:22.665432 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=8567): Process ended prematurely: osmo-stp_10.42.42.5(pid=8567) [trial-2371↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8567)] [trial-2371↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 07:03:22.675238 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 07:03:22.738610 run osmo-hlr_10.42.42.2(pid=8564): ERR: Terminated: ERROR {rc=237} [trial-2371↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8564)] 07:03:22.790647 run osmo-hlr_10.42.42.2(pid=8564): stdout: | (launched: 2022-12-10_07:03:19.208784) 07:03:22.843395 run osmo-hlr_10.42.42.2(pid=8564): stderr: | �[0;m�[1;31m20221210070319410 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210070319410 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210070319410 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210070319410 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210070319410 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210070319411 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210070319423 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2371/run.2022-12-10_06-54-20/gprs:sysmo+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210070319432 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210070319432 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210070319432 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 07:03:22.888572 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8557): Terminating (SIGTERM) 07:03:22.931143 run iperf3-srv_10.42.42.10(pid=8558): Terminating (SIGTERM) 07:03:22.974055 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8559): Terminating (SIGTERM) 07:03:23.016757 run iperf3-srv_10.42.42.10(pid=8560): Terminating (SIGTERM) 07:03:23.059394 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8563): Terminating (SIGTERM) 07:03:23.101993 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8566): Terminating (SIGTERM) 07:03:23.144665 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8569): Terminating (SIGTERM) 07:03:23.154548 --- ParallelTerminationStrategy: PID 8557 died... 07:03:23.211817 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8557): Terminated: ok {rc=0} 07:03:23.222168 --- ParallelTerminationStrategy: PID 8558 died... 07:03:23.278732 run iperf3-srv_10.42.42.10(pid=8558): Terminated {rc=256} 07:03:23.289042 --- ParallelTerminationStrategy: PID 8559 died... 07:03:23.345601 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8559): Terminated: ok {rc=0} 07:03:23.355709 --- ParallelTerminationStrategy: PID 8560 died... 07:03:23.412109 run iperf3-srv_10.42.42.10(pid=8560): Terminated {rc=256} 07:03:23.422395 --- ParallelTerminationStrategy: PID 8563 died... 07:03:23.478941 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8563): Terminated: ok {rc=0} 07:03:23.489237 --- ParallelTerminationStrategy: PID 8566 died... 07:03:23.545694 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8566): Terminated: ok {rc=0} 07:03:23.555961 --- ParallelTerminationStrategy: PID 8569 died... 07:03:23.612914 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8569): Terminated: ok {rc=0} 07:03:23.702300 bus /gobi_0: Setting Powered False 07:03:24.809515 bus /gobi_0: Setting Powered False 07:03:25.919391 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8567): Process ended prematurely: osmo-stp_10.42.42.5(pid=8567) [trial-2371↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8567)]