Failed
gprs:trx-lms-limenet-micro.cs_paging_gprs_active.py (from gprs_trx-lms-limenet-micro)
Stacktrace
osmo-stp_10.42.42.5(pid=13255): Process ended prematurely: osmo-stp_10.42.42.5(pid=13255) [trial-2371↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13255)]
Standard Output
---------------------------------------------- trial-2371 gprs:trx-lms-limenet-micro cs_paging_gprs_active.py ---------------------------------------------- 07:50:05.591735 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 07:50:05.602508 tst gprs:trx-lms-limenet-micro: Using 1 x bts (candidates: 1) 07:50:05.735620 tst cs_paging_gprs_active.py: using LAC 26923 07:50:05.848495 tst cs_paging_gprs_active.py: using RAC 148 07:50:05.962119 tst cs_paging_gprs_active.py: using CellId 26923 07:50:06.075726 tst cs_paging_gprs_active.py: using BVCI 26924 07:50:06.098329 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 07:50:06.108830 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 07:50:06.119234 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 07:50:06.129896 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 07:50:06.140425 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 07:50:06.151030 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 07:50:06.161790 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 07:50:06.172382 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 07:50:06.183305 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 07:50:06.297606 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 07:50:06.586138 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 07:50:06.718363 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:50:07.045650 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13245): Launched 07:50:07.316158 run iperf3-srv_10.42.42.10(pid=13246): Launched 07:50:07.509986 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 07:50:07.642182 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:50:07.968543 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13247): Launched 07:50:08.239035 run iperf3-srv_10.42.42.10(pid=13248): Launched 07:50:08.431643 tst cs_paging_gprs_active.py:38: start network... 07:50:08.563366 run osmo-hlr_10.42.42.2: Starting osmo-hlr 07:50:09.066654 run create_hlr_db(pid=13249): Launched 07:50:09.248687 bus /sierra_2: Setting Powered False 07:50:10.270931 run create_hlr_db(pid=13249): Terminated: ok {rc=0} 07:50:10.691234 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13251): Launched 07:50:11.006884 run osmo-hlr_10.42.42.2(pid=13252): Launched 07:50:11.121882 run osmo-stp_10.42.42.5: Starting osmo-stp 07:50:11.669550 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13254): Launched 07:50:11.984086 run osmo-stp_10.42.42.5(pid=13255): Launched 07:50:12.097909 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 07:50:12.646663 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13257): Launched 07:50:12.759375 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 07:50:13.034504 run patchelf(pid=13258): Launched 07:50:13.219601 run osmo-stp_10.42.42.5(pid=13255): ERR: Terminated: ERROR {rc=1} [trial-2371↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13255)] 07:50:13.355131 run osmo-stp_10.42.42.5(pid=13255): stdout: | (launched: 2022-12-10_07:50:11.829488) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:50:13.490737 run osmo-stp_10.42.42.5(pid=13255): stderr: | �[0;m�[38;5;43m20221210075012020 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210075012020 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210075012020 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210075012021 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210075012021 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210075012021 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210075012021 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:50:13.621607 run osmo-stp_10.42.42.5(pid=13255): stdout: | (launched: 2022-12-10_07:50:11.829488) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:50:13.750669 run osmo-stp_10.42.42.5(pid=13255): stderr: | �[0;m�[38;5;43m20221210075012020 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210075012020 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210075012020 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210075012021 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210075012021 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210075012021 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210075012021 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:50:13.901718 run patchelf(pid=13258): Terminating (SIGINT) 07:50:14.079699 run patchelf(pid=13258): Terminated: ok {rc=0} 07:50:14.112566 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=13255): Process ended prematurely: osmo-stp_10.42.42.5(pid=13255) [trial-2371↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13255)] [trial-2371↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38] 07:50:14.122223 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 07:50:14.184136 run osmo-hlr_10.42.42.2(pid=13252): ERR: Terminated: ERROR {rc=237} [trial-2371↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=13252)] 07:50:14.234660 run osmo-hlr_10.42.42.2(pid=13252): stdout: | (launched: 2022-12-10_07:50:10.852001) 07:50:14.285847 run osmo-hlr_10.42.42.2(pid=13252): stderr: | �[0;m�[1;31m20221210075011048 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210075011048 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210075011048 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210075011048 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210075011048 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210075011048 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210075011064 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2371/run.2022-12-10_06-54-20/gprs:trx-lms-limenet-micro/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210075011073 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210075011073 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210075011073 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 07:50:14.330016 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13245): Terminating (SIGTERM) 07:50:14.371056 run iperf3-srv_10.42.42.10(pid=13246): Terminating (SIGTERM) 07:50:14.412237 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13247): Terminating (SIGTERM) 07:50:14.453336 run iperf3-srv_10.42.42.10(pid=13248): Terminating (SIGTERM) 07:50:14.494417 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13251): Terminating (SIGTERM) 07:50:14.535758 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13254): Terminating (SIGTERM) 07:50:14.576904 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13257): Terminating (SIGTERM) 07:50:14.586657 --- ParallelTerminationStrategy: PID 13245 died... 07:50:14.642008 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13245): Terminated: ok {rc=0} 07:50:14.652057 --- ParallelTerminationStrategy: PID 13246 died... 07:50:14.707241 run iperf3-srv_10.42.42.10(pid=13246): Terminated {rc=256} 07:50:14.717405 --- ParallelTerminationStrategy: PID 13247 died... 07:50:14.772429 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13247): Terminated: ok {rc=0} 07:50:14.782417 --- ParallelTerminationStrategy: PID 13248 died... 07:50:14.837373 run iperf3-srv_10.42.42.10(pid=13248): Terminated {rc=256} 07:50:14.847355 --- ParallelTerminationStrategy: PID 13251 died... 07:50:14.902681 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13251): Terminated: ok {rc=0} 07:50:14.912691 --- ParallelTerminationStrategy: PID 13254 died... 07:50:14.967463 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13254): Terminated: ok {rc=0} 07:50:14.977515 --- ParallelTerminationStrategy: PID 13257 died... 07:50:15.032198 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13257): Terminated: ok {rc=0} 07:50:15.118799 bus /gobi_0: Setting Powered False 07:50:16.239615 bus /gobi_0: Setting Powered False 07:50:17.350577 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=13255): Process ended prematurely: osmo-stp_10.42.42.5(pid=13255) [trial-2371↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13255)]