Failed
gprs:trx-lms-limenet-micro.iperf3.py (from gprs_trx-lms-limenet-micro)
Stacktrace
osmo-stp_10.42.42.5(pid=13267): Process ended prematurely: osmo-stp_10.42.42.5(pid=13267) [trial-2371↪gprs:trx-lms-limenet-micro↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13267)]
Standard Output
---------------------------------------------- trial-2371 gprs:trx-lms-limenet-micro iperf3.py ---------------------------------------------- 07:50:18.458708 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 07:50:18.470080 tst gprs:trx-lms-limenet-micro: Using 1 x bts (candidates: 1) 07:50:18.609192 tst iperf3.py: using LAC 26924 07:50:18.731889 tst iperf3.py: using RAC 149 07:50:18.854685 tst iperf3.py: using CellId 26924 07:50:18.977634 tst iperf3.py: using BVCI 26925 07:50:19.001612 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 07:50:19.012682 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 07:50:19.023629 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 07:50:19.034589 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 07:50:19.045421 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 07:50:19.056281 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 07:50:19.067394 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 07:50:19.078160 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 07:50:19.089141 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 07:50:19.359779 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 07:50:19.481485 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:50:19.785656 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13259): Launched 07:50:20.038124 run iperf3-srv_10.42.42.10(pid=13260): Launched 07:50:20.216623 tst iperf3.py:8: start network... 07:50:20.338628 run osmo-hlr_10.42.42.2: Starting osmo-hlr 07:50:20.800216 run create_hlr_db(pid=13261): Launched 07:50:20.968592 bus /gobi_6: Setting Powered False 07:50:21.990927 run create_hlr_db(pid=13261): Terminated: ok {rc=0} 07:50:22.409811 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13263): Launched 07:50:22.725435 run osmo-hlr_10.42.42.2(pid=13264): Launched 07:50:22.841514 run osmo-stp_10.42.42.5: Starting osmo-stp 07:50:23.389334 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13266): Launched 07:50:23.704245 run osmo-stp_10.42.42.5(pid=13267): Launched 07:50:23.818357 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 07:50:24.366034 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13269): Launched 07:50:24.478506 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 07:50:24.753375 run patchelf(pid=13270): Launched 07:50:24.937771 run osmo-stp_10.42.42.5(pid=13267): ERR: Terminated: ERROR {rc=1} [trial-2371↪gprs:trx-lms-limenet-micro↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13267)] 07:50:25.072320 run osmo-stp_10.42.42.5(pid=13267): stdout: | (launched: 2022-12-10_07:50:23.549743) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:50:25.207059 run osmo-stp_10.42.42.5(pid=13267): stderr: | �[0;m�[38;5;43m20221210075023742 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210075023742 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210075023742 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210075023742 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210075023743 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210075023743 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210075023743 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:50:25.337273 run osmo-stp_10.42.42.5(pid=13267): stdout: | (launched: 2022-12-10_07:50:23.549743) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:50:25.465667 run osmo-stp_10.42.42.5(pid=13267): stderr: | �[0;m�[38;5;43m20221210075023742 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210075023742 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210075023742 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210075023742 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210075023743 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210075023743 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210075023743 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:50:25.616493 run patchelf(pid=13270): Terminating (SIGINT) 07:50:25.793786 run patchelf(pid=13270): Terminated: ok {rc=0} 07:50:25.826160 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=13267): Process ended prematurely: osmo-stp_10.42.42.5(pid=13267) [trial-2371↪gprs:trx-lms-limenet-micro↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13267)] [trial-2371↪gprs:trx-lms-limenet-micro↪iperf3.py:8] 07:50:25.835925 tst iperf3.py:8: Test FAILED (7.4 sec) 07:50:25.897942 run osmo-hlr_10.42.42.2(pid=13264): ERR: Terminated: ERROR {rc=237} [trial-2371↪gprs:trx-lms-limenet-micro↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=13264)] 07:50:25.948644 run osmo-hlr_10.42.42.2(pid=13264): stdout: | (launched: 2022-12-10_07:50:22.570193) 07:50:26.000043 run osmo-hlr_10.42.42.2(pid=13264): stderr: | �[0;m�[1;31m20221210075022768 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210075022768 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210075022768 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210075022768 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210075022768 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210075022769 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210075022810 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2371/run.2022-12-10_06-54-20/gprs:trx-lms-limenet-micro/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210075022819 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210075022819 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210075022819 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 07:50:26.043439 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13259): Terminating (SIGTERM) 07:50:26.084399 run iperf3-srv_10.42.42.10(pid=13260): Terminating (SIGTERM) 07:50:26.125553 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13263): Terminating (SIGTERM) 07:50:26.166446 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13266): Terminating (SIGTERM) 07:50:26.207739 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13269): Terminating (SIGTERM) 07:50:26.217488 --- ParallelTerminationStrategy: PID 13259 died... 07:50:26.273173 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13259): Terminated: ok {rc=0} 07:50:26.283322 --- ParallelTerminationStrategy: PID 13260 died... 07:50:26.338517 run iperf3-srv_10.42.42.10(pid=13260): Terminated {rc=256} 07:50:26.348588 --- ParallelTerminationStrategy: PID 13263 died... 07:50:26.403696 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13263): Terminated: ok {rc=0} 07:50:26.413840 --- ParallelTerminationStrategy: PID 13266 died... 07:50:26.468797 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13266): Terminated: ok {rc=0} 07:50:26.478849 --- ParallelTerminationStrategy: PID 13269 died... 07:50:26.534022 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13269): Terminated: ok {rc=0} 07:50:26.619370 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=13267): Process ended prematurely: osmo-stp_10.42.42.5(pid=13267) [trial-2371↪gprs:trx-lms-limenet-micro↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13267)]