Failed
gprs:trx-lms.cs_paging_gprs_active.py (from gprs_trx-lms)
Stacktrace
osmo-stp_10.42.42.5(pid=12703): Process ended prematurely: osmo-stp_10.42.42.5(pid=12703) [trial-2371↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12703)]
Standard Output
---------------------------------------------- trial-2371 gprs:trx-lms cs_paging_gprs_active.py ---------------------------------------------- 07:42:21.067576 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 07:42:21.078551 tst gprs:trx-lms: Using 1 x bts (candidates: 1) 07:42:21.220449 tst cs_paging_gprs_active.py: using LAC 26881 07:42:21.343704 tst cs_paging_gprs_active.py: using RAC 106 07:42:21.470943 tst cs_paging_gprs_active.py: using CellId 26881 07:42:21.595517 tst cs_paging_gprs_active.py: using BVCI 26882 07:42:21.619707 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 07:42:21.630683 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 07:42:21.641522 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 07:42:21.652260 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 07:42:21.663014 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 07:42:21.673746 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 07:42:21.684601 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 07:42:21.695446 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 07:42:21.706286 tst gprs:trx-lms: Using 1 x modem (candidates: 4) 07:42:21.823697 tst gprs:trx-lms: Using 1 x modem (candidates: 4) 07:42:22.113675 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 07:42:22.246157 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:42:22.574694 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12693): Launched 07:42:22.845870 run iperf3-srv_10.42.42.10(pid=12694): Launched 07:42:23.040765 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 07:42:23.172584 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:42:23.500223 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12695): Launched 07:42:23.772019 run iperf3-srv_10.42.42.10(pid=12696): Launched 07:42:23.965550 tst cs_paging_gprs_active.py:38: start network... 07:42:24.097670 run osmo-hlr_10.42.42.2: Starting osmo-hlr 07:42:24.603469 run create_hlr_db(pid=12697): Launched 07:42:24.786307 bus /sierra_2: Setting Powered False 07:42:25.807737 run create_hlr_db(pid=12697): Terminated: ok {rc=0} 07:42:26.202849 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12699): Launched 07:42:26.497731 run osmo-hlr_10.42.42.2(pid=12700): Launched 07:42:26.612202 run osmo-stp_10.42.42.5: Starting osmo-stp 07:42:27.133559 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12702): Launched 07:42:27.428189 run osmo-stp_10.42.42.5(pid=12703): Launched 07:42:27.536883 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 07:42:28.049041 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12705): Launched 07:42:28.153798 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 07:42:28.410915 run patchelf(pid=12706): Launched 07:42:28.583728 run osmo-stp_10.42.42.5(pid=12703): ERR: Terminated: ERROR {rc=1} [trial-2371↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12703)] 07:42:28.710733 run osmo-stp_10.42.42.5(pid=12703): stdout: | (launched: 2022-12-10_07:42:27.282940) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:42:28.837441 run osmo-stp_10.42.42.5(pid=12703): stderr: | �[0;m�[38;5;43m20221210074227452 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210074227452 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210074227452 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210074227452 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210074227453 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210074227453 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210074227453 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:42:28.959459 run osmo-stp_10.42.42.5(pid=12703): stdout: | (launched: 2022-12-10_07:42:27.282940) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:42:29.080719 run osmo-stp_10.42.42.5(pid=12703): stderr: | �[0;m�[38;5;43m20221210074227452 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210074227452 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210074227452 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210074227452 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210074227453 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210074227453 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210074227453 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:42:29.222477 run patchelf(pid=12706): Terminating (SIGINT) 07:42:29.389426 run patchelf(pid=12706): Terminated: ok {rc=0} 07:42:29.419882 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=12703): Process ended prematurely: osmo-stp_10.42.42.5(pid=12703) [trial-2371↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12703)] [trial-2371↪gprs:trx-lms↪cs_paging_gprs_active.py:38] 07:42:29.428872 tst cs_paging_gprs_active.py:38: Test FAILED (8.4 sec) 07:42:29.488818 run osmo-hlr_10.42.42.2(pid=12700): ERR: Terminated: ERROR {rc=237} [trial-2371↪gprs:trx-lms↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=12700)] 07:42:29.537494 run osmo-hlr_10.42.42.2(pid=12700): stdout: | (launched: 2022-12-10_07:42:26.352687) 07:42:29.586783 run osmo-hlr_10.42.42.2(pid=12700): stderr: | �[0;m�[1;31m20221210074226528 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210074226528 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210074226528 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210074226528 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210074226528 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210074226528 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210074226540 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2371/run.2022-12-10_06-54-20/gprs:trx-lms/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210074226550 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210074226551 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210074226551 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 07:42:29.628698 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12693): Terminating (SIGTERM) 07:42:29.668432 run iperf3-srv_10.42.42.10(pid=12694): Terminating (SIGTERM) 07:42:29.708189 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12695): Terminating (SIGTERM) 07:42:29.747763 run iperf3-srv_10.42.42.10(pid=12696): Terminating (SIGTERM) 07:42:29.787446 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12699): Terminating (SIGTERM) 07:42:29.827182 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12702): Terminating (SIGTERM) 07:42:29.867043 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12705): Terminating (SIGTERM) 07:42:29.876538 --- ParallelTerminationStrategy: PID 12693 died... 07:42:29.929883 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12693): Terminated: ok {rc=0} 07:42:29.939815 --- ParallelTerminationStrategy: PID 12694 died... 07:42:29.993541 run iperf3-srv_10.42.42.10(pid=12694): Terminated {rc=256} 07:42:30.003144 --- ParallelTerminationStrategy: PID 12695 died... 07:42:30.055952 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12695): Terminated: ok {rc=0} 07:42:30.065818 --- ParallelTerminationStrategy: PID 12696 died... 07:42:30.118358 run iperf3-srv_10.42.42.10(pid=12696): Terminated {rc=256} 07:42:30.127867 --- ParallelTerminationStrategy: PID 12699 died... 07:42:30.180256 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12699): Terminated: ok {rc=0} 07:42:30.190085 --- ParallelTerminationStrategy: PID 12702 died... 07:42:30.242351 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12702): Terminated: ok {rc=0} 07:42:30.252069 --- ParallelTerminationStrategy: PID 12705 died... 07:42:30.305456 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12705): Terminated: ok {rc=0} 07:42:30.394821 bus /gobi_0: Setting Powered False 07:42:31.517273 bus /gobi_0: Setting Powered False 07:42:32.630116 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=12703): Process ended prematurely: osmo-stp_10.42.42.5(pid=12703) [trial-2371↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12703)]