Failed
dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any.switch_tch_pdch.py (from dynts_oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any)
Stacktrace
osmo-stp_10.42.42.5(pid=18026): Process ended prematurely: osmo-stp_10.42.42.5(pid=18026) [trial-2372↪dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18026)]
Standard Output
---------------------------------------------- trial-2372 dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any switch_tch_pdch.py ---------------------------------------------- 08:38:22.066951 tst dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 08:38:22.079375 tst dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x bts (candidates: 1) 08:38:22.230153 tst switch_tch_pdch.py: using LAC 27178 08:38:22.354320 tst switch_tch_pdch.py: using RAC 148 08:38:22.480055 tst switch_tch_pdch.py: using CellId 27178 08:38:22.606708 tst switch_tch_pdch.py: using BVCI 27179 08:38:22.632061 tst dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 08:38:22.644485 tst dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 08:38:22.656898 tst dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 08:38:22.669426 tst dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 08:38:22.681518 tst dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 08:38:22.694015 tst dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 08:38:22.706422 tst dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 08:38:22.718756 tst dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x modem (candidates: 2) 08:38:22.841636 tst dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x modem (candidates: 2) 08:38:23.136882 tst switch_tch_pdch.py:51: start network... 08:38:23.271841 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:38:23.826983 run create_hlr_db(pid=18020): Launched 08:38:24.014737 bus /gobi_6: Setting Powered False 08:38:25.037613 run create_hlr_db(pid=18020): Terminated: ok {rc=0} 08:38:25.486163 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18022): Launched 08:38:25.921674 run osmo-hlr_10.42.42.2(pid=18023): Launched 08:38:26.083953 run osmo-stp_10.42.42.5: Starting osmo-stp 08:38:26.733753 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18025): Launched 08:38:27.164674 run osmo-stp_10.42.42.5(pid=18026): Launched 08:38:27.397576 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:38:27.981046 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18028): Launched 08:38:28.097932 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:38:28.399573 run patchelf(pid=18029): Launched 08:38:28.590271 run osmo-stp_10.42.42.5(pid=18026): ERR: Terminated: ERROR {rc=1} [trial-2372↪dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18026)] 08:38:28.728244 run osmo-stp_10.42.42.5(pid=18026): stdout: | (launched: 2022-12-10_08:38:26.902528) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:38:28.867180 run osmo-stp_10.42.42.5(pid=18026): stderr: | �[0;m�[38;5;43m20221210083827218 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210083827218 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210083827218 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210083827219 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210083827219 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210083827219 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210083827219 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:38:29.002405 run osmo-stp_10.42.42.5(pid=18026): stdout: | (launched: 2022-12-10_08:38:26.902528) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:38:29.135572 run osmo-stp_10.42.42.5(pid=18026): stderr: | �[0;m�[38;5;43m20221210083827218 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210083827218 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210083827218 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210083827219 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210083827219 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210083827219 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210083827219 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:38:29.290910 run patchelf(pid=18029): Terminating (SIGINT) 08:38:29.473228 run patchelf(pid=18029): Terminated: ok {rc=0} 08:38:29.506629 tst switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=18026): Process ended prematurely: osmo-stp_10.42.42.5(pid=18026) [trial-2372↪dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18026)] [trial-2372↪dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54] 08:38:29.516621 tst switch_tch_pdch.py:54: Test FAILED (7.4 sec) 08:38:29.581479 run osmo-hlr_10.42.42.2(pid=18023): ERR: Terminated: ERROR {rc=237} [trial-2372↪dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=18023)] 08:38:29.635391 run osmo-hlr_10.42.42.2(pid=18023): stdout: | (launched: 2022-12-10_08:38:25.652201) 08:38:29.689675 run osmo-hlr_10.42.42.2(pid=18023): stderr: | �[0;m�[1;31m20221210083825969 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210083825970 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210083825970 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210083825970 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210083825970 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210083825970 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210083825987 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2372/run.2022-12-10_08-20-36/dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210083825996 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210083825996 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210083825997 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:38:29.735711 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18022): Terminating (SIGTERM) 08:38:29.780791 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18025): Terminating (SIGTERM) 08:38:29.827091 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18028): Terminating (SIGTERM) 08:38:29.837836 --- ParallelTerminationStrategy: PID 18022 died... 08:38:29.896498 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18022): Terminated: ok {rc=0} 08:38:29.908073 --- ParallelTerminationStrategy: PID 18025 died... 08:38:29.966586 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18025): Terminated: ok {rc=0} 08:38:29.977599 --- ParallelTerminationStrategy: PID 18028 died... 08:38:30.036253 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18028): Terminated: ok {rc=0} 08:38:30.125633 bus /gobi_0: Setting Powered False 08:38:31.299986 bus /gobi_0: Setting Powered False 08:38:32.441766 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/dynts/switch_tch_pdch.py", line 54, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=18026): Process ended prematurely: osmo-stp_10.42.42.5(pid=18026) [trial-2372↪dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18026)]