Failed
gprs:nanobts+band-1900+mod-bts0-dynts-ipa.ping_idle_ping.py (from gprs_nanobts+band-1900+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=23345): Process ended prematurely: osmo-stp_10.42.42.5(pid=23345) [trial-2372↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23345)]
Standard Output
---------------------------------------------- trial-2372 gprs:nanobts+band-1900+mod-bts0-dynts-ipa ping_idle_ping.py ---------------------------------------------- 09:26:52.585331 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:26:52.597516 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 09:26:52.753913 tst ping_idle_ping.py: using LAC 27436 09:26:52.880074 tst ping_idle_ping.py: using RAC 151 09:26:53.007281 tst ping_idle_ping.py: using CellId 27436 09:26:53.132768 tst ping_idle_ping.py: using BVCI 27437 09:26:53.157647 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:26:53.169150 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:26:53.180534 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:26:53.192361 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:26:53.203685 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:26:53.215264 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:26:53.227008 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:26:53.238445 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 09:26:53.529889 tst ping_idle_ping.py:24: start network... 09:26:53.663307 run osmo-hlr_10.42.42.2: Starting osmo-hlr 09:26:54.175556 run create_hlr_db(pid=23339): Launched 09:26:54.361449 bus /gobi_6: Setting Powered False 09:26:55.382623 run create_hlr_db(pid=23339): Terminated: ok {rc=0} 09:26:55.807684 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23341): Launched 09:26:56.126758 run osmo-hlr_10.42.42.2(pid=23342): Launched 09:26:56.246897 run osmo-stp_10.42.42.5: Starting osmo-stp 09:26:56.802141 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23344): Launched 09:26:57.120380 run osmo-stp_10.42.42.5(pid=23345): Launched 09:26:57.236125 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 09:26:57.793387 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23347): Launched 09:26:57.907262 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 09:26:58.184532 run patchelf(pid=23348): Launched 09:26:58.371209 run osmo-stp_10.42.42.5(pid=23345): ERR: Terminated: ERROR {rc=1} [trial-2372↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23345)] 09:26:58.508156 run osmo-stp_10.42.42.5(pid=23345): stdout: | (launched: 2022-12-10_09:26:56.964055) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:26:58.644336 run osmo-stp_10.42.42.5(pid=23345): stderr: | �[0;m�[38;5;43m20221210092657155 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210092657155 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210092657155 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210092657156 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210092657156 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210092657156 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210092657156 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:26:58.776848 run osmo-stp_10.42.42.5(pid=23345): stdout: | (launched: 2022-12-10_09:26:56.964055) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:26:58.908237 run osmo-stp_10.42.42.5(pid=23345): stderr: | �[0;m�[38;5;43m20221210092657155 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210092657155 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210092657155 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210092657156 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210092657156 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210092657156 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210092657156 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:26:59.061139 run patchelf(pid=23348): Terminating (SIGINT) 09:26:59.239979 run patchelf(pid=23348): Terminated: ok {rc=0} 09:26:59.272277 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=23345): Process ended prematurely: osmo-stp_10.42.42.5(pid=23345) [trial-2372↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23345)] [trial-2372↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪ping_idle_ping.py:27] 09:26:59.281427 tst ping_idle_ping.py:27: Test FAILED (6.7 sec) 09:26:59.343530 run osmo-hlr_10.42.42.2(pid=23342): ERR: Terminated: ERROR {rc=237} [trial-2372↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=23342)] 09:26:59.394140 run osmo-hlr_10.42.42.2(pid=23342): stdout: | (launched: 2022-12-10_09:26:55.970241) 09:26:59.445758 run osmo-hlr_10.42.42.2(pid=23342): stderr: | �[0;m�[1;31m20221210092656169 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210092656169 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210092656169 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210092656169 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210092656169 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210092656169 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210092656181 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2372/run.2022-12-10_08-20-36/gprs:nanobts+band-1900+mod-bts0-dynts-ipa/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210092656189 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210092656190 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210092656190 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 09:26:59.489702 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23341): Terminating (SIGTERM) 09:26:59.531280 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23344): Terminating (SIGTERM) 09:26:59.572934 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23347): Terminating (SIGTERM) 09:26:59.582693 --- ParallelTerminationStrategy: PID 23341 died... 09:26:59.637948 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23341): Terminated: ok {rc=0} 09:26:59.648098 --- ParallelTerminationStrategy: PID 23344 died... 09:26:59.703308 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23344): Terminated: ok {rc=0} 09:26:59.713447 --- ParallelTerminationStrategy: PID 23347 died... 09:26:59.768446 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23347): Terminated: ok {rc=0} 09:26:59.854207 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=23345): Process ended prematurely: osmo-stp_10.42.42.5(pid=23345) [trial-2372↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23345)]