Failed
gprs:nanobts+band-1900.ping_idle_ping.py (from gprs_nanobts+band-1900)
Stacktrace
osmo-stp_10.42.42.5(pid=23206): Process ended prematurely: osmo-stp_10.42.42.5(pid=23206) [trial-2372↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23206)]
Standard Output
---------------------------------------------- trial-2372 gprs:nanobts+band-1900 ping_idle_ping.py ---------------------------------------------- 09:24:53.084665 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 09:24:53.096033 tst gprs:nanobts+band-1900: Using 1 x bts (candidates: 1) 09:24:53.223859 tst ping_idle_ping.py: using LAC 27426 09:24:53.342812 tst ping_idle_ping.py: using RAC 141 09:24:53.467828 tst ping_idle_ping.py: using CellId 27426 09:24:53.596697 tst ping_idle_ping.py: using BVCI 27427 09:24:53.621268 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 09:24:53.632381 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 09:24:53.643550 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 09:24:53.655095 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 09:24:53.666620 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 09:24:53.678190 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 09:24:53.689892 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 09:24:53.701526 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 09:24:53.980712 tst ping_idle_ping.py:24: start network... 09:24:54.105954 run osmo-hlr_10.42.42.2: Starting osmo-hlr 09:24:54.581889 run create_hlr_db(pid=23200): Launched 09:24:54.755378 bus /gobi_6: Setting Powered False 09:24:55.776895 run create_hlr_db(pid=23200): Terminated: ok {rc=0} 09:24:56.178165 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23202): Launched 09:24:56.478895 run osmo-hlr_10.42.42.2(pid=23203): Launched 09:24:56.596698 run osmo-stp_10.42.42.5: Starting osmo-stp 09:24:57.124111 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23205): Launched 09:24:57.424374 run osmo-stp_10.42.42.5(pid=23206): Launched 09:24:57.534658 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 09:24:58.058338 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23208): Launched 09:24:58.165639 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 09:24:58.427924 run patchelf(pid=23209): Launched 09:24:58.604844 run osmo-stp_10.42.42.5(pid=23206): ERR: Terminated: ERROR {rc=1} [trial-2372↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23206)] 09:24:58.733721 run osmo-stp_10.42.42.5(pid=23206): stdout: | (launched: 2022-12-10_09:24:57.276368) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:24:58.862796 run osmo-stp_10.42.42.5(pid=23206): stderr: | �[0;m�[38;5;43m20221210092457448 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210092457448 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210092457448 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210092457449 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210092457451 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210092457451 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210092457451 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:24:58.987939 run osmo-stp_10.42.42.5(pid=23206): stdout: | (launched: 2022-12-10_09:24:57.276368) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:24:59.111656 run osmo-stp_10.42.42.5(pid=23206): stderr: | �[0;m�[38;5;43m20221210092457448 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210092457448 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210092457448 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210092457449 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210092457451 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210092457451 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210092457451 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:24:59.255370 run patchelf(pid=23209): Terminating (SIGINT) 09:24:59.425234 run patchelf(pid=23209): Terminated: ok {rc=0} 09:24:59.455851 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=23206): Process ended prematurely: osmo-stp_10.42.42.5(pid=23206) [trial-2372↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23206)] [trial-2372↪gprs:nanobts+band-1900↪ping_idle_ping.py:27] 09:24:59.464448 tst ping_idle_ping.py:27: Test FAILED (6.4 sec) 09:24:59.524448 run osmo-hlr_10.42.42.2(pid=23203): ERR: Terminated: ERROR {rc=237} [trial-2372↪gprs:nanobts+band-1900↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=23203)] 09:24:59.573060 run osmo-hlr_10.42.42.2(pid=23203): stdout: | (launched: 2022-12-10_09:24:56.330827) 09:24:59.622279 run osmo-hlr_10.42.42.2(pid=23203): stderr: | �[0;m�[1;31m20221210092456505 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210092456505 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210092456505 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210092456505 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210092456505 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210092456505 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210092456518 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2372/run.2022-12-10_08-20-36/gprs:nanobts+band-1900/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210092456527 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210092456527 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210092456527 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 09:24:59.663915 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23202): Terminating (SIGTERM) 09:24:59.703598 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23205): Terminating (SIGTERM) 09:24:59.743058 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23208): Terminating (SIGTERM) 09:24:59.752512 --- ParallelTerminationStrategy: PID 23202 died... 09:24:59.805225 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23202): Terminated: ok {rc=0} 09:24:59.814732 --- ParallelTerminationStrategy: PID 23205 died... 09:24:59.867798 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23205): Terminated: ok {rc=0} 09:24:59.877699 --- ParallelTerminationStrategy: PID 23208 died... 09:24:59.930095 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23208): Terminated: ok {rc=0} 09:25:00.017950 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=23206): Process ended prematurely: osmo-stp_10.42.42.5(pid=23206) [trial-2372↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23206)]