Failed
gprs:oc2g+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=17689): Process ended prematurely: osmo-stp_10.42.42.5(pid=17689) [trial-2372↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17689)]
Standard Output
---------------------------------------------- trial-2372 gprs:oc2g+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 08:37:22.366578 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:37:22.377565 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 08:37:22.522648 tst cs_paging_gprs_active.py: using LAC 27173 08:37:22.651647 tst cs_paging_gprs_active.py: using RAC 143 08:37:22.774537 tst cs_paging_gprs_active.py: using CellId 27173 08:37:22.898787 tst cs_paging_gprs_active.py: using BVCI 27174 08:37:22.923397 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:37:22.934924 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:37:22.945954 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:37:22.956885 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:37:22.968134 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:37:22.979306 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:37:22.990468 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:37:23.001361 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:37:23.012402 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 08:37:23.127784 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 08:37:23.405752 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 08:37:23.531979 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:37:23.844059 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17679): Launched 08:37:24.103940 run iperf3-srv_10.42.42.10(pid=17680): Launched 08:37:24.289373 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 08:37:24.415805 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:37:24.727772 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17681): Launched 08:37:24.987029 run iperf3-srv_10.42.42.10(pid=17682): Launched 08:37:25.172211 tst cs_paging_gprs_active.py:38: start network... 08:37:25.298636 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:37:25.776095 run create_hlr_db(pid=17683): Launched 08:37:25.951651 bus /gobi_6: Setting Powered False 08:37:26.972219 run create_hlr_db(pid=17683): Terminated: ok {rc=0} 08:37:27.399586 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17685): Launched 08:37:27.722293 run osmo-hlr_10.42.42.2(pid=17686): Launched 08:37:27.839979 run osmo-stp_10.42.42.5: Starting osmo-stp 08:37:28.395684 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17688): Launched 08:37:28.716036 run osmo-stp_10.42.42.5(pid=17689): Launched 08:37:28.833097 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:37:29.392045 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17691): Launched 08:37:29.506739 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:37:29.784760 run patchelf(pid=17692): Launched 08:37:29.972594 run osmo-stp_10.42.42.5(pid=17689): ERR: Terminated: ERROR {rc=1} [trial-2372↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17689)] 08:37:30.110120 run osmo-stp_10.42.42.5(pid=17689): stdout: | (launched: 2022-12-10_08:37:28.559239) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:37:30.247695 run osmo-stp_10.42.42.5(pid=17689): stderr: | �[0;m�[38;5;43m20221210083728750 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210083728751 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210083728751 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210083728751 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210083728752 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210083728752 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210083728752 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:37:30.380649 run osmo-stp_10.42.42.5(pid=17689): stdout: | (launched: 2022-12-10_08:37:28.559239) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:37:30.511844 run osmo-stp_10.42.42.5(pid=17689): stderr: | �[0;m�[38;5;43m20221210083728750 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210083728751 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210083728751 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210083728751 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210083728752 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210083728752 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210083728752 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:37:30.665256 run patchelf(pid=17692): Terminating (SIGINT) 08:37:30.844647 run patchelf(pid=17692): Terminated: ok {rc=0} 08:37:30.879756 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=17689): Process ended prematurely: osmo-stp_10.42.42.5(pid=17689) [trial-2372↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17689)] [trial-2372↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 08:37:30.892873 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 08:37:30.966956 run osmo-hlr_10.42.42.2(pid=17686): ERR: Terminated: ERROR {rc=237} [trial-2372↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=17686)] 08:37:31.021488 run osmo-hlr_10.42.42.2(pid=17686): stdout: | (launched: 2022-12-10_08:37:27.564274) 08:37:31.095721 run osmo-hlr_10.42.42.2(pid=17686): stderr: | �[0;m�[1;31m20221210083727762 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210083727762 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210083727762 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210083727762 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210083727762 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210083727762 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210083727774 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2372/run.2022-12-10_08-20-36/gprs:oc2g+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210083727783 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210083727783 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210083727783 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:37:31.140354 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17679): Terminating (SIGTERM) 08:37:31.184146 run iperf3-srv_10.42.42.10(pid=17680): Terminating (SIGTERM) 08:37:31.228061 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17681): Terminating (SIGTERM) 08:37:31.271932 run iperf3-srv_10.42.42.10(pid=17682): Terminating (SIGTERM) 08:37:31.315581 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17685): Terminating (SIGTERM) 08:37:31.357381 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17688): Terminating (SIGTERM) 08:37:31.399085 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17691): Terminating (SIGTERM) 08:37:31.408531 --- ParallelTerminationStrategy: PID 17679 died... 08:37:31.464098 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17679): Terminated: ok {rc=0} 08:37:31.474458 --- ParallelTerminationStrategy: PID 17680 died... 08:37:31.529794 run iperf3-srv_10.42.42.10(pid=17680): Terminated {rc=256} 08:37:31.539978 --- ParallelTerminationStrategy: PID 17681 died... 08:37:31.595377 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17681): Terminated: ok {rc=0} 08:37:31.605621 --- ParallelTerminationStrategy: PID 17682 died... 08:37:31.660625 run iperf3-srv_10.42.42.10(pid=17682): Terminated {rc=256} 08:37:31.670873 --- ParallelTerminationStrategy: PID 17685 died... 08:37:31.726029 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17685): Terminated: ok {rc=0} 08:37:31.736220 --- ParallelTerminationStrategy: PID 17688 died... 08:37:31.791615 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17688): Terminated: ok {rc=0} 08:37:31.802083 --- ParallelTerminationStrategy: PID 17691 died... 08:37:31.857567 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17691): Terminated: ok {rc=0} 08:37:31.949833 bus /gobi_0: Setting Powered False 08:37:33.052711 bus /gobi_0: Setting Powered False 08:37:34.162780 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=17689): Process ended prematurely: osmo-stp_10.42.42.5(pid=17689) [trial-2372↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17689)]