Failed
gprs:trx-b200+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=19101): Process ended prematurely: osmo-stp_10.42.42.5(pid=19101) [trial-2372↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19101)]
Standard Output
---------------------------------------------- trial-2372 gprs:trx-b200+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 08:45:59.299752 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:45:59.311234 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 08:45:59.475092 tst cs_paging_gprs_active.py: using LAC 27219 08:45:59.600415 tst cs_paging_gprs_active.py: using RAC 189 08:45:59.730874 tst cs_paging_gprs_active.py: using CellId 27219 08:45:59.858424 tst cs_paging_gprs_active.py: using BVCI 27220 08:45:59.883175 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:45:59.894382 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:45:59.905534 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:45:59.917144 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:45:59.929720 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:45:59.942007 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:45:59.952873 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:45:59.963707 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:45:59.974708 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 08:46:00.095893 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 08:46:00.392555 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 08:46:00.528294 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:46:00.872122 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19091): Launched 08:46:01.168485 run iperf3-srv_10.42.42.10(pid=19092): Launched 08:46:01.399147 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 08:46:01.540024 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:46:01.883788 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19093): Launched 08:46:02.169109 run iperf3-srv_10.42.42.10(pid=19094): Launched 08:46:02.357784 tst cs_paging_gprs_active.py:38: start network... 08:46:02.485616 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:46:02.969870 run create_hlr_db(pid=19095): Launched 08:46:03.145388 bus /gobi_6: Setting Powered False 08:46:04.166666 run create_hlr_db(pid=19095): Terminated: ok {rc=0} 08:46:04.595383 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19097): Launched 08:46:04.918328 run osmo-hlr_10.42.42.2(pid=19098): Launched 08:46:05.036492 run osmo-stp_10.42.42.5: Starting osmo-stp 08:46:05.598996 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19100): Launched 08:46:05.922494 run osmo-stp_10.42.42.5(pid=19101): Launched 08:46:06.040446 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:46:06.604507 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19103): Launched 08:46:06.720584 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:46:07.001914 run patchelf(pid=19104): Launched 08:46:07.191420 run osmo-stp_10.42.42.5(pid=19101): ERR: Terminated: ERROR {rc=1} [trial-2372↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19101)] 08:46:07.330272 run osmo-stp_10.42.42.5(pid=19101): stdout: | (launched: 2022-12-10_08:46:05.764301) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:46:07.469020 run osmo-stp_10.42.42.5(pid=19101): stderr: | �[0;m�[38;5;43m20221210084605956 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210084605956 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210084605956 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210084605957 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210084605959 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210084605959 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210084605959 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:46:07.602952 run osmo-stp_10.42.42.5(pid=19101): stdout: | (launched: 2022-12-10_08:46:05.764301) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:46:07.735513 run osmo-stp_10.42.42.5(pid=19101): stderr: | �[0;m�[38;5;43m20221210084605956 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210084605956 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210084605956 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210084605957 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210084605959 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210084605959 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210084605959 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:46:07.890644 run patchelf(pid=19104): Terminating (SIGINT) 08:46:08.072783 run patchelf(pid=19104): Terminated: ok {rc=0} 08:46:08.106113 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=19101): Process ended prematurely: osmo-stp_10.42.42.5(pid=19101) [trial-2372↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19101)] [trial-2372↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 08:46:08.115747 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 08:46:08.178279 run osmo-hlr_10.42.42.2(pid=19098): ERR: Terminated: ERROR {rc=237} [trial-2372↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=19098)] 08:46:08.229673 run osmo-hlr_10.42.42.2(pid=19098): stdout: | (launched: 2022-12-10_08:46:04.760793) 08:46:08.281558 run osmo-hlr_10.42.42.2(pid=19098): stderr: | �[0;m�[1;31m20221210084604958 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210084604958 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210084604958 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210084604958 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210084604958 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210084604959 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210084604971 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2372/run.2022-12-10_08-20-36/gprs:trx-b200+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210084604980 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210084604980 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210084604980 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:46:08.325875 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19091): Terminating (SIGTERM) 08:46:08.367396 run iperf3-srv_10.42.42.10(pid=19092): Terminating (SIGTERM) 08:46:08.408810 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19093): Terminating (SIGTERM) 08:46:08.450496 run iperf3-srv_10.42.42.10(pid=19094): Terminating (SIGTERM) 08:46:08.492255 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19097): Terminating (SIGTERM) 08:46:08.534019 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19100): Terminating (SIGTERM) 08:46:08.575651 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19103): Terminating (SIGTERM) 08:46:08.585264 --- ParallelTerminationStrategy: PID 19091 died... 08:46:08.640871 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19091): Terminated: ok {rc=0} 08:46:08.651022 --- ParallelTerminationStrategy: PID 19092 died... 08:46:08.705839 run iperf3-srv_10.42.42.10(pid=19092): Terminated {rc=256} 08:46:08.715679 --- ParallelTerminationStrategy: PID 19093 died... 08:46:08.770725 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19093): Terminated: ok {rc=0} 08:46:08.780637 --- ParallelTerminationStrategy: PID 19094 died... 08:46:08.835303 run iperf3-srv_10.42.42.10(pid=19094): Terminated {rc=256} 08:46:08.845328 --- ParallelTerminationStrategy: PID 19097 died... 08:46:08.900228 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19097): Terminated: ok {rc=0} 08:46:08.910236 --- ParallelTerminationStrategy: PID 19100 died... 08:46:08.965143 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19100): Terminated: ok {rc=0} 08:46:08.975133 --- ParallelTerminationStrategy: PID 19103 died... 08:46:09.029957 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19103): Terminated: ok {rc=0} 08:46:09.115946 bus /gobi_0: Setting Powered False 08:46:10.222711 bus /gobi_0: Setting Powered False 08:46:11.332492 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=19101): Process ended prematurely: osmo-stp_10.42.42.5(pid=19101) [trial-2372↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19101)]