Failed
gprs:trx-lms+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-lms+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=21378): Process ended prematurely: osmo-stp_10.42.42.5(pid=21378) [trial-2372↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21378)]
Standard Output
---------------------------------------------- trial-2372 gprs:trx-lms+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 09:10:01.786590 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:10:01.798544 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x bts (candidates: 1) 09:10:01.943881 tst cs_paging_gprs_active.py: using LAC 27347 09:10:02.067433 tst cs_paging_gprs_active.py: using RAC 62 09:10:02.210975 tst cs_paging_gprs_active.py: using CellId 27347 09:10:02.334837 tst cs_paging_gprs_active.py: using BVCI 27348 09:10:02.359587 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:10:02.371493 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:10:02.383741 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:10:02.396705 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:10:02.409390 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:10:02.422311 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:10:02.434067 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:10:02.447004 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:10:02.459798 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 09:10:02.581930 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 09:10:02.875498 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 09:10:03.011514 run iperf3-srv_10.42.42.10: Starting iperf3-srv 09:10:03.351156 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21368): Launched 09:10:03.633782 run iperf3-srv_10.42.42.10(pid=21369): Launched 09:10:03.831457 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 09:10:03.967023 run iperf3-srv_10.42.42.10: Starting iperf3-srv 09:10:04.305849 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21370): Launched 09:10:04.587297 run iperf3-srv_10.42.42.10(pid=21371): Launched 09:10:04.786247 tst cs_paging_gprs_active.py:38: start network... 09:10:04.922001 run osmo-hlr_10.42.42.2: Starting osmo-hlr 09:10:05.441274 run create_hlr_db(pid=21372): Launched 09:10:05.627879 bus /gobi_6: Setting Powered False 09:10:06.651749 run create_hlr_db(pid=21372): Terminated: ok {rc=0} 09:10:07.065400 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21374): Launched 09:10:07.375095 run osmo-hlr_10.42.42.2(pid=21375): Launched 09:10:07.493352 run osmo-stp_10.42.42.5: Starting osmo-stp 09:10:08.029963 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21377): Launched 09:10:08.339526 run osmo-stp_10.42.42.5(pid=21378): Launched 09:10:08.451030 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 09:10:08.984323 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21380): Launched 09:10:09.093207 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 09:10:09.361486 run patchelf(pid=21381): Launched 09:10:09.540893 run osmo-stp_10.42.42.5(pid=21378): ERR: Terminated: ERROR {rc=1} [trial-2372↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21378)] 09:10:09.671047 run osmo-stp_10.42.42.5(pid=21378): stdout: | (launched: 2022-12-10_09:10:08.185085) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:10:09.801803 run osmo-stp_10.42.42.5(pid=21378): stderr: | �[0;m�[38;5;43m20221210091008362 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210091008362 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210091008362 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210091008363 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210091008363 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210091008363 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210091008363 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:10:09.927875 run osmo-stp_10.42.42.5(pid=21378): stdout: | (launched: 2022-12-10_09:10:08.185085) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:10:10.052907 run osmo-stp_10.42.42.5(pid=21378): stderr: | �[0;m�[38;5;43m20221210091008362 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210091008362 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210091008362 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210091008363 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210091008363 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210091008363 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210091008363 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:10:10.198498 run patchelf(pid=21381): Terminating (SIGINT) 09:10:10.369640 run patchelf(pid=21381): Terminated: ok {rc=0} 09:10:10.400773 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=21378): Process ended prematurely: osmo-stp_10.42.42.5(pid=21378) [trial-2372↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21378)] [trial-2372↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 09:10:10.409807 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 09:10:10.469612 run osmo-hlr_10.42.42.2(pid=21375): ERR: Terminated: ERROR {rc=237} [trial-2372↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=21375)] 09:10:10.518025 run osmo-hlr_10.42.42.2(pid=21375): stdout: | (launched: 2022-12-10_09:10:07.220453) 09:10:10.567124 run osmo-hlr_10.42.42.2(pid=21375): stderr: | �[0;m�[1;31m20221210091007402 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210091007402 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210091007402 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210091007402 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210091007402 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210091007402 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210091007414 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2372/run.2022-12-10_08-20-36/gprs:trx-lms+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210091007423 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210091007423 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210091007423 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 09:10:10.608485 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21368): Terminating (SIGTERM) 09:10:10.647692 run iperf3-srv_10.42.42.10(pid=21369): Terminating (SIGTERM) 09:10:10.687622 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21370): Terminating (SIGTERM) 09:10:10.726721 run iperf3-srv_10.42.42.10(pid=21371): Terminating (SIGTERM) 09:10:10.768135 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21374): Terminating (SIGTERM) 09:10:10.807174 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21377): Terminating (SIGTERM) 09:10:10.846413 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21380): Terminating (SIGTERM) 09:10:10.855775 --- ParallelTerminationStrategy: PID 21368 died... 09:10:10.908333 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21368): Terminated: ok {rc=0} 09:10:10.918094 --- ParallelTerminationStrategy: PID 21369 died... 09:10:10.970183 run iperf3-srv_10.42.42.10(pid=21369): Terminated {rc=256} 09:10:10.979806 --- ParallelTerminationStrategy: PID 21370 died... 09:10:11.032394 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21370): Terminated: ok {rc=0} 09:10:11.041847 --- ParallelTerminationStrategy: PID 21371 died... 09:10:11.094352 run iperf3-srv_10.42.42.10(pid=21371): Terminated {rc=256} 09:10:11.103987 --- ParallelTerminationStrategy: PID 21374 died... 09:10:11.156199 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21374): Terminated: ok {rc=0} 09:10:11.165916 --- ParallelTerminationStrategy: PID 21377 died... 09:10:11.218158 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21377): Terminated: ok {rc=0} 09:10:11.227901 --- ParallelTerminationStrategy: PID 21380 died... 09:10:11.280132 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21380): Terminated: ok {rc=0} 09:10:11.362476 bus /gobi_0: Setting Powered False 09:10:12.477294 bus /gobi_0: Setting Powered False 09:10:13.590903 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=21378): Process ended prematurely: osmo-stp_10.42.42.5(pid=21378) [trial-2372↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21378)]