Failed
gprs:trx-sysmocell5000+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=19581): Process ended prematurely: osmo-stp_10.42.42.5(pid=19581) [trial-2372↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19581)]
Standard Output
---------------------------------------------- trial-2372 gprs:trx-sysmocell5000+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 08:52:52.573153 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:52:52.584005 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x bts (candidates: 1) 08:52:52.729466 tst cs_paging_gprs_active.py: using LAC 27256 08:52:52.857767 tst cs_paging_gprs_active.py: using RAC 226 08:52:52.987079 tst cs_paging_gprs_active.py: using CellId 27256 08:52:53.113914 tst cs_paging_gprs_active.py: using BVCI 27257 08:52:53.138853 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:52:53.150150 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:52:53.161364 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:52:53.172624 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:52:53.183786 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:52:53.195125 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:52:53.206599 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:52:53.217829 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:52:53.229299 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 08:52:53.348649 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 08:52:53.642214 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 08:52:53.777295 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:52:54.115527 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19571): Launched 08:52:54.396931 run iperf3-srv_10.42.42.10(pid=19572): Launched 08:52:54.595849 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 08:52:54.730574 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:52:55.068016 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19573): Launched 08:52:55.349291 run iperf3-srv_10.42.42.10(pid=19574): Launched 08:52:55.547052 tst cs_paging_gprs_active.py:38: start network... 08:52:55.681546 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:52:56.200336 run create_hlr_db(pid=19575): Launched 08:52:56.386095 bus /gobi_6: Setting Powered False 08:52:57.408047 run create_hlr_db(pid=19575): Terminated: ok {rc=0} 08:52:57.819564 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19577): Launched 08:52:58.127572 run osmo-hlr_10.42.42.2(pid=19578): Launched 08:52:58.246789 run osmo-stp_10.42.42.5: Starting osmo-stp 08:52:58.786302 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19580): Launched 08:52:59.093993 run osmo-stp_10.42.42.5(pid=19581): Launched 08:52:59.206288 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:52:59.739538 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19583): Launched 08:52:59.848403 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:53:00.115745 run patchelf(pid=19584): Launched 08:53:00.293439 run osmo-stp_10.42.42.5(pid=19581): ERR: Terminated: ERROR {rc=1} [trial-2372↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19581)] 08:53:00.423689 run osmo-stp_10.42.42.5(pid=19581): stdout: | (launched: 2022-12-10_08:52:58.941232) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:53:00.554255 run osmo-stp_10.42.42.5(pid=19581): stderr: | �[0;m�[38;5;43m20221210085259116 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210085259116 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210085259117 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210085259117 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210085259117 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210085259118 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210085259118 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:53:00.680652 run osmo-stp_10.42.42.5(pid=19581): stdout: | (launched: 2022-12-10_08:52:58.941232) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:53:00.805638 run osmo-stp_10.42.42.5(pid=19581): stderr: | �[0;m�[38;5;43m20221210085259116 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210085259116 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210085259117 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210085259117 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210085259117 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210085259118 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210085259118 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:53:00.954713 run patchelf(pid=19584): Terminating (SIGINT) 08:53:01.128800 run patchelf(pid=19584): Terminated: ok {rc=0} 08:53:01.161649 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=19581): Process ended prematurely: osmo-stp_10.42.42.5(pid=19581) [trial-2372↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19581)] [trial-2372↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 08:53:01.171749 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 08:53:01.236179 run osmo-hlr_10.42.42.2(pid=19578): ERR: Terminated: ERROR {rc=237} [trial-2372↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=19578)] 08:53:01.287279 run osmo-hlr_10.42.42.2(pid=19578): stdout: | (launched: 2022-12-10_08:52:57.974319) 08:53:01.339254 run osmo-hlr_10.42.42.2(pid=19578): stderr: | �[0;m�[1;31m20221210085258153 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210085258153 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210085258153 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210085258153 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210085258153 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210085258153 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210085258166 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2372/run.2022-12-10_08-20-36/gprs:trx-sysmocell5000+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210085258176 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210085258177 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210085258177 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:53:01.383488 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19571): Terminating (SIGTERM) 08:53:01.425014 run iperf3-srv_10.42.42.10(pid=19572): Terminating (SIGTERM) 08:53:01.470844 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19573): Terminating (SIGTERM) 08:53:01.514623 run iperf3-srv_10.42.42.10(pid=19574): Terminating (SIGTERM) 08:53:01.557477 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19577): Terminating (SIGTERM) 08:53:01.599320 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19580): Terminating (SIGTERM) 08:53:01.644081 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19583): Terminating (SIGTERM) 08:53:01.653860 --- ParallelTerminationStrategy: PID 19571 died... 08:53:01.709953 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19571): Terminated: ok {rc=0} 08:53:01.720279 --- ParallelTerminationStrategy: PID 19572 died... 08:53:01.775902 run iperf3-srv_10.42.42.10(pid=19572): Terminated {rc=256} 08:53:01.786342 --- ParallelTerminationStrategy: PID 19573 died... 08:53:01.842139 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19573): Terminated: ok {rc=0} 08:53:01.852520 --- ParallelTerminationStrategy: PID 19574 died... 08:53:01.908099 run iperf3-srv_10.42.42.10(pid=19574): Terminated {rc=256} 08:53:01.918603 --- ParallelTerminationStrategy: PID 19577 died... 08:53:01.974067 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19577): Terminated: ok {rc=0} 08:53:01.984424 --- ParallelTerminationStrategy: PID 19580 died... 08:53:02.038884 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19580): Terminated: ok {rc=0} 08:53:02.050361 --- ParallelTerminationStrategy: PID 19583 died... 08:53:02.104893 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19583): Terminated: ok {rc=0} 08:53:02.190045 bus /gobi_0: Setting Powered False 08:53:03.289888 bus /gobi_0: Setting Powered False 08:53:04.398454 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=19581): Process ended prematurely: osmo-stp_10.42.42.5(pid=19581) [trial-2372↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19581)]