Failed
gprs:trx-umtrx+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=20618): Process ended prematurely: osmo-stp_10.42.42.5(pid=20618) [trial-2372↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20618)]
Standard Output
---------------------------------------------- trial-2372 gprs:trx-umtrx+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 09:03:08.792928 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 09:03:08.803923 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 09:03:08.958875 tst cs_paging_gprs_active.py: using LAC 27310 09:03:09.075607 tst cs_paging_gprs_active.py: using RAC 25 09:03:09.192460 tst cs_paging_gprs_active.py: using CellId 27310 09:03:09.311200 tst cs_paging_gprs_active.py: using BVCI 27311 09:03:09.334179 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 09:03:09.345315 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 09:03:09.356367 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 09:03:09.367612 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 09:03:09.378643 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 09:03:09.389712 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 09:03:09.400773 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 09:03:09.411801 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 09:03:09.423266 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 09:03:09.541666 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 09:03:09.840080 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 09:03:09.975012 run iperf3-srv_10.42.42.10: Starting iperf3-srv 09:03:10.305976 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20608): Launched 09:03:10.581723 run iperf3-srv_10.42.42.10(pid=20609): Launched 09:03:10.779004 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 09:03:10.913441 run iperf3-srv_10.42.42.10: Starting iperf3-srv 09:03:11.243754 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20610): Launched 09:03:11.520288 run iperf3-srv_10.42.42.10(pid=20611): Launched 09:03:11.717671 tst cs_paging_gprs_active.py:38: start network... 09:03:11.851756 run osmo-hlr_10.42.42.2: Starting osmo-hlr 09:03:12.365729 run create_hlr_db(pid=20612): Launched 09:03:12.550640 bus /gobi_6: Setting Powered False 09:03:13.573454 run create_hlr_db(pid=20612): Terminated: ok {rc=0} 09:03:13.999758 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20614): Launched 09:03:14.319897 run osmo-hlr_10.42.42.2(pid=20615): Launched 09:03:14.441120 run osmo-stp_10.42.42.5: Starting osmo-stp 09:03:14.995569 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20617): Launched 09:03:15.314767 run osmo-stp_10.42.42.5(pid=20618): Launched 09:03:15.430723 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 09:03:16.015457 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20620): Launched 09:03:16.163269 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 09:03:16.459337 run patchelf(pid=20621): Launched 09:03:16.644218 run osmo-stp_10.42.42.5(pid=20618): ERR: Terminated: ERROR {rc=1} [trial-2372↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20618)] 09:03:16.779602 run osmo-stp_10.42.42.5(pid=20618): stdout: | (launched: 2022-12-10_09:03:15.158518) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:03:16.914716 run osmo-stp_10.42.42.5(pid=20618): stderr: | �[0;m�[38;5;43m20221210090315351 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210090315351 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210090315351 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210090315352 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210090315352 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210090315352 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210090315352 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:03:17.048596 run osmo-stp_10.42.42.5(pid=20618): stdout: | (launched: 2022-12-10_09:03:15.158518) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:03:17.176648 run osmo-stp_10.42.42.5(pid=20618): stderr: | �[0;m�[38;5;43m20221210090315351 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210090315351 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210090315351 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210090315352 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210090315352 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210090315352 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210090315352 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:03:17.325629 run patchelf(pid=20621): Terminating (SIGINT) 09:03:17.497666 run patchelf(pid=20621): Terminated: ok {rc=0} 09:03:17.529247 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=20618): Process ended prematurely: osmo-stp_10.42.42.5(pid=20618) [trial-2372↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20618)] [trial-2372↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 09:03:17.538592 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 09:03:17.598760 run osmo-hlr_10.42.42.2(pid=20615): ERR: Terminated: ERROR {rc=237} [trial-2372↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=20615)] 09:03:17.647689 run osmo-hlr_10.42.42.2(pid=20615): stdout: | (launched: 2022-12-10_09:03:14.163407) 09:03:17.697290 run osmo-hlr_10.42.42.2(pid=20615): stderr: | �[0;m�[1;31m20221210090314361 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210090314361 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210090314361 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210090314361 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210090314361 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210090314361 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210090314374 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2372/run.2022-12-10_08-20-36/gprs:trx-umtrx+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210090314382 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210090314382 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210090314382 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 09:03:17.739070 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20608): Terminating (SIGTERM) 09:03:17.778632 run iperf3-srv_10.42.42.10(pid=20609): Terminating (SIGTERM) 09:03:17.818205 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20610): Terminating (SIGTERM) 09:03:17.857863 run iperf3-srv_10.42.42.10(pid=20611): Terminating (SIGTERM) 09:03:17.897603 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20614): Terminating (SIGTERM) 09:03:17.937364 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20617): Terminating (SIGTERM) 09:03:17.977203 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20620): Terminating (SIGTERM) 09:03:17.986525 --- ParallelTerminationStrategy: PID 20608 died... 09:03:18.039604 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20608): Terminated: ok {rc=0} 09:03:18.049373 --- ParallelTerminationStrategy: PID 20609 died... 09:03:18.102195 run iperf3-srv_10.42.42.10(pid=20609): Terminated {rc=256} 09:03:18.111771 --- ParallelTerminationStrategy: PID 20610 died... 09:03:18.164632 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20610): Terminated: ok {rc=0} 09:03:18.174369 --- ParallelTerminationStrategy: PID 20611 died... 09:03:18.227643 run iperf3-srv_10.42.42.10(pid=20611): Terminated {rc=256} 09:03:18.237514 --- ParallelTerminationStrategy: PID 20614 died... 09:03:18.290407 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20614): Terminated: ok {rc=0} 09:03:18.300102 --- ParallelTerminationStrategy: PID 20617 died... 09:03:18.353644 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20617): Terminated: ok {rc=0} 09:03:18.363575 --- ParallelTerminationStrategy: PID 20620 died... 09:03:18.416378 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20620): Terminated: ok {rc=0} 09:03:18.503868 bus /gobi_0: Setting Powered False 09:03:19.606880 bus /gobi_0: Setting Powered False 09:03:20.716674 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=20618): Process ended prematurely: osmo-stp_10.42.42.5(pid=20618) [trial-2372↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20618)]