Failed
gprs:trx-b200+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=27700): Process ended prematurely: osmo-stp_10.42.42.5(pid=27700) [trial-2373↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27700)]
Standard Output
---------------------------------------------- trial-2373 gprs:trx-b200+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 10:13:29.868551 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:13:29.879825 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 10:13:30.046438 tst cs_paging_gprs_active.py: using LAC 27680 10:13:30.173041 tst cs_paging_gprs_active.py: using RAC 140 10:13:30.300118 tst cs_paging_gprs_active.py: using CellId 27680 10:13:30.423157 tst cs_paging_gprs_active.py: using BVCI 27681 10:13:30.446577 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:13:30.457690 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:13:30.468703 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:13:30.479784 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:13:30.490826 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:13:30.502032 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:13:30.513152 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:13:30.523958 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:13:30.534971 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 10:13:30.654629 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 10:13:30.943747 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 10:13:31.074607 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:13:31.413189 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27690): Launched 10:13:31.701917 run iperf3-srv_10.42.42.10(pid=27691): Launched 10:13:31.893824 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 10:13:32.022983 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:13:32.342296 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27692): Launched 10:13:32.604528 run iperf3-srv_10.42.42.10(pid=27693): Launched 10:13:32.791147 tst cs_paging_gprs_active.py:38: start network... 10:13:32.918373 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:13:33.407155 run create_hlr_db(pid=27694): Launched 10:13:33.581817 bus /gobi_6: Setting Powered False 10:13:34.603592 run create_hlr_db(pid=27694): Terminated: ok {rc=0} 10:13:35.008781 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27696): Launched 10:13:35.312364 run osmo-hlr_10.42.42.2(pid=27697): Launched 10:13:35.428202 run osmo-stp_10.42.42.5: Starting osmo-stp 10:13:35.956022 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27699): Launched 10:13:36.262027 run osmo-stp_10.42.42.5(pid=27700): Launched 10:13:36.373484 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:13:36.904938 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27702): Launched 10:13:37.014400 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:13:37.280136 run patchelf(pid=27703): Launched 10:13:37.458253 run osmo-stp_10.42.42.5(pid=27700): ERR: Terminated: ERROR {rc=1} [trial-2373↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27700)] 10:13:37.588864 run osmo-stp_10.42.42.5(pid=27700): stdout: | (launched: 2022-12-10_10:13:36.111658) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:13:37.719247 run osmo-stp_10.42.42.5(pid=27700): stderr: | �[0;m�[38;5;43m20221210101336281 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210101336282 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210101336282 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210101336282 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210101336283 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210101336283 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210101336283 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:13:37.845068 run osmo-stp_10.42.42.5(pid=27700): stdout: | (launched: 2022-12-10_10:13:36.111658) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:13:37.969768 run osmo-stp_10.42.42.5(pid=27700): stderr: | �[0;m�[38;5;43m20221210101336281 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210101336282 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210101336282 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210101336282 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210101336283 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210101336283 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210101336283 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:13:38.115681 run patchelf(pid=27703): Terminating (SIGINT) 10:13:38.287195 run patchelf(pid=27703): Terminated: ok {rc=0} 10:13:38.318724 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=27700): Process ended prematurely: osmo-stp_10.42.42.5(pid=27700) [trial-2373↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27700)] [trial-2373↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 10:13:38.327817 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 10:13:38.387600 run osmo-hlr_10.42.42.2(pid=27697): ERR: Terminated: ERROR {rc=237} [trial-2373↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=27697)] 10:13:38.436374 run osmo-hlr_10.42.42.2(pid=27697): stdout: | (launched: 2022-12-10_10:13:35.163427) 10:13:38.485798 run osmo-hlr_10.42.42.2(pid=27697): stderr: | �[0;m�[1;31m20221210101335342 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210101335342 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210101335342 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210101335342 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210101335342 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210101335342 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210101335354 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2373/run.2022-12-10_09-48-07/gprs:trx-b200+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210101335363 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210101335363 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210101335363 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:13:38.528111 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27690): Terminating (SIGTERM) 10:13:38.567855 run iperf3-srv_10.42.42.10(pid=27691): Terminating (SIGTERM) 10:13:38.607700 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27692): Terminating (SIGTERM) 10:13:38.647272 run iperf3-srv_10.42.42.10(pid=27693): Terminating (SIGTERM) 10:13:38.686939 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27696): Terminating (SIGTERM) 10:13:38.726677 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27699): Terminating (SIGTERM) 10:13:38.766468 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27702): Terminating (SIGTERM) 10:13:38.775658 --- ParallelTerminationStrategy: PID 27690 died... 10:13:38.829008 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27690): Terminated: ok {rc=0} 10:13:38.838599 --- ParallelTerminationStrategy: PID 27691 died... 10:13:38.891429 run iperf3-srv_10.42.42.10(pid=27691): Terminated {rc=256} 10:13:38.901038 --- ParallelTerminationStrategy: PID 27692 died... 10:13:38.953784 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27692): Terminated: ok {rc=0} 10:13:38.963346 --- ParallelTerminationStrategy: PID 27693 died... 10:13:39.016621 run iperf3-srv_10.42.42.10(pid=27693): Terminated {rc=256} 10:13:39.026259 --- ParallelTerminationStrategy: PID 27696 died... 10:13:39.079046 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27696): Terminated: ok {rc=0} 10:13:39.088602 --- ParallelTerminationStrategy: PID 27699 died... 10:13:39.141248 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27699): Terminated: ok {rc=0} 10:13:39.150870 --- ParallelTerminationStrategy: PID 27702 died... 10:13:39.203698 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27702): Terminated: ok {rc=0} 10:13:39.287338 bus /gobi_0: Setting Powered False 10:13:40.394366 bus /gobi_0: Setting Powered False 10:13:41.502025 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=27700): Process ended prematurely: osmo-stp_10.42.42.5(pid=27700) [trial-2373↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27700)]