Failed
gprs:trx-lms+mod-bts0-dynts-osmo.ping_idle_ping.py (from gprs_trx-lms+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=30106): Process ended prematurely: osmo-stp_10.42.42.5(pid=30106) [trial-2373↪gprs:trx-lms+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30106)]
Standard Output
---------------------------------------------- trial-2373 gprs:trx-lms+mod-bts0-dynts-osmo ping_idle_ping.py ---------------------------------------------- 10:40:20.272572 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:40:20.284424 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 10:40:20.443467 tst ping_idle_ping.py: using LAC 27822 10:40:20.562037 tst ping_idle_ping.py: using RAC 27 10:40:20.679750 tst ping_idle_ping.py: using CellId 27822 10:40:20.798160 tst ping_idle_ping.py: using BVCI 27823 10:40:20.821431 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:40:20.832501 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:40:20.843575 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:40:20.854608 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:40:20.865833 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:40:20.876771 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:40:20.888115 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:40:20.899295 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 10:40:21.189488 tst ping_idle_ping.py:24: start network... 10:40:21.322982 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:40:21.830175 run create_hlr_db(pid=30100): Launched 10:40:22.017601 bus /gobi_6: Setting Powered False 10:40:23.037703 run create_hlr_db(pid=30100): Terminated: ok {rc=0} 10:40:23.462404 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30102): Launched 10:40:23.782756 run osmo-hlr_10.42.42.2(pid=30103): Launched 10:40:23.901337 run osmo-stp_10.42.42.5: Starting osmo-stp 10:40:24.459430 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30105): Launched 10:40:24.779763 run osmo-stp_10.42.42.5(pid=30106): Launched 10:40:24.896063 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:40:25.454241 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30108): Launched 10:40:25.568304 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:40:25.846619 run patchelf(pid=30109): Launched 10:40:26.034230 run osmo-stp_10.42.42.5(pid=30106): ERR: Terminated: ERROR {rc=1} [trial-2373↪gprs:trx-lms+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30106)] 10:40:26.171186 run osmo-stp_10.42.42.5(pid=30106): stdout: | (launched: 2022-12-10_10:40:24.622564) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:40:26.308431 run osmo-stp_10.42.42.5(pid=30106): stderr: | �[0;m�[38;5;43m20221210104024814 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210104024814 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210104024814 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210104024815 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210104024815 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210104024815 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210104024815 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:40:26.440532 run osmo-stp_10.42.42.5(pid=30106): stdout: | (launched: 2022-12-10_10:40:24.622564) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:40:26.571213 run osmo-stp_10.42.42.5(pid=30106): stderr: | �[0;m�[38;5;43m20221210104024814 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210104024814 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210104024814 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210104024815 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210104024815 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210104024815 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210104024815 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:40:26.723898 run patchelf(pid=30109): Terminating (SIGINT) 10:40:26.902911 run patchelf(pid=30109): Terminated: ok {rc=0} 10:40:26.935321 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=30106): Process ended prematurely: osmo-stp_10.42.42.5(pid=30106) [trial-2373↪gprs:trx-lms+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30106)] [trial-2373↪gprs:trx-lms+mod-bts0-dynts-osmo↪ping_idle_ping.py:27] 10:40:26.944617 tst ping_idle_ping.py:27: Test FAILED (6.7 sec) 10:40:27.008501 run osmo-hlr_10.42.42.2(pid=30103): ERR: Terminated: ERROR {rc=237} [trial-2373↪gprs:trx-lms+mod-bts0-dynts-osmo↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=30103)] 10:40:27.060321 run osmo-hlr_10.42.42.2(pid=30103): stdout: | (launched: 2022-12-10_10:40:23.624921) 10:40:27.112707 run osmo-hlr_10.42.42.2(pid=30103): stderr: | �[0;m�[1;31m20221210104023822 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210104023822 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210104023822 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210104023822 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210104023822 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210104023822 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210104023834 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2373/run.2022-12-10_09-48-07/gprs:trx-lms+mod-bts0-dynts-osmo/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210104023842 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210104023843 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210104023843 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:40:27.157506 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30102): Terminating (SIGTERM) 10:40:27.199997 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30105): Terminating (SIGTERM) 10:40:27.242423 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30108): Terminating (SIGTERM) 10:40:27.252282 --- ParallelTerminationStrategy: PID 30102 died... 10:40:27.309597 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30102): Terminated: ok {rc=0} 10:40:27.319833 --- ParallelTerminationStrategy: PID 30105 died... 10:40:27.376436 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30105): Terminated: ok {rc=0} 10:40:27.386610 --- ParallelTerminationStrategy: PID 30108 died... 10:40:27.443181 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30108): Terminated: ok {rc=0} 10:40:27.531711 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=30106): Process ended prematurely: osmo-stp_10.42.42.5(pid=30106) [trial-2373↪gprs:trx-lms+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30106)]