Failed
gprs:nanobts+band-1900.cs_paging_gprs_active.py (from gprs_nanobts+band-1900)
Stacktrace
osmo-stp_10.42.42.5(pid=7114): Process ended prematurely: osmo-stp_10.42.42.5(pid=7114) [trial-2374↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7114)]
Standard Output
---------------------------------------------- trial-2374 gprs:nanobts+band-1900 cs_paging_gprs_active.py ---------------------------------------------- 12:18:24.102042 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 12:18:24.112456 tst gprs:nanobts+band-1900: Using 1 x bts (candidates: 1) 12:18:24.235030 tst cs_paging_gprs_active.py: using LAC 28344 12:18:24.355842 tst cs_paging_gprs_active.py: using RAC 39 12:18:24.475670 tst cs_paging_gprs_active.py: using CellId 28344 12:18:24.590613 tst cs_paging_gprs_active.py: using BVCI 28345 12:18:24.613263 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 12:18:24.623667 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 12:18:24.633970 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 12:18:24.644217 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 12:18:24.654537 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 12:18:24.664699 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 12:18:24.675099 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 12:18:24.685412 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 12:18:24.695691 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 12:18:24.813343 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 12:18:25.089077 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 12:18:25.213323 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:18:25.520479 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7104): Launched 12:18:25.775190 run iperf3-srv_10.42.42.10(pid=7105): Launched 12:18:25.955621 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 12:18:26.078325 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:18:26.385201 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7106): Launched 12:18:26.640092 run iperf3-srv_10.42.42.10(pid=7107): Launched 12:18:26.820731 tst cs_paging_gprs_active.py:38: start network... 12:18:26.943671 run osmo-hlr_10.42.42.2: Starting osmo-hlr 12:18:27.418643 run create_hlr_db(pid=7108): Launched 12:18:27.589115 bus /sierra_2: Setting Powered False 12:18:28.611970 run create_hlr_db(pid=7108): Terminated: ok {rc=0} 12:18:29.005744 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7110): Launched 12:18:29.302120 run osmo-hlr_10.42.42.2(pid=7111): Launched 12:18:29.410103 run osmo-stp_10.42.42.5: Starting osmo-stp 12:18:29.924868 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7113): Launched 12:18:30.221749 run osmo-stp_10.42.42.5(pid=7114): Launched 12:18:30.330024 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 12:18:30.866710 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7116): Launched 12:18:30.985797 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 12:18:31.273499 run patchelf(pid=7117): Launched 12:18:31.450749 run osmo-stp_10.42.42.5(pid=7114): ERR: Terminated: ERROR {rc=1} [trial-2374↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7114)] 12:18:31.580354 run osmo-stp_10.42.42.5(pid=7114): stdout: | (launched: 2022-12-10_12:18:30.075288) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:18:31.709742 run osmo-stp_10.42.42.5(pid=7114): stderr: | �[0;m�[38;5;43m20221210121830242 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210121830242 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210121830243 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210121830243 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210121830243 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210121830244 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210121830244 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:18:31.835211 run osmo-stp_10.42.42.5(pid=7114): stdout: | (launched: 2022-12-10_12:18:30.075288) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:18:31.959859 run osmo-stp_10.42.42.5(pid=7114): stderr: | �[0;m�[38;5;43m20221210121830242 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210121830242 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210121830243 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210121830243 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210121830243 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210121830244 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210121830244 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:18:32.104701 run patchelf(pid=7117): Terminating (SIGINT) 12:18:32.272780 run patchelf(pid=7117): Terminated: ok {rc=0} 12:18:32.303688 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=7114): Process ended prematurely: osmo-stp_10.42.42.5(pid=7114) [trial-2374↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7114)] [trial-2374↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38] 12:18:32.312823 tst cs_paging_gprs_active.py:38: Test FAILED (8.2 sec) 12:18:32.372460 run osmo-hlr_10.42.42.2(pid=7111): ERR: Terminated: ERROR {rc=237} [trial-2374↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=7111)] 12:18:32.421039 run osmo-hlr_10.42.42.2(pid=7111): stdout: | (launched: 2022-12-10_12:18:29.156137) 12:18:32.470518 run osmo-hlr_10.42.42.2(pid=7111): stderr: | �[0;m�[1;31m20221210121829329 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210121829329 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210121829329 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210121829329 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210121829329 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210121829329 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210121829346 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2374/run.2022-12-10_11-15-10/gprs:nanobts+band-1900/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210121829356 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210121829356 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210121829356 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 12:18:32.512522 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7104): Terminating (SIGTERM) 12:18:32.551789 run iperf3-srv_10.42.42.10(pid=7105): Terminating (SIGTERM) 12:18:32.591051 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7106): Terminating (SIGTERM) 12:18:32.630279 run iperf3-srv_10.42.42.10(pid=7107): Terminating (SIGTERM) 12:18:32.669467 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7110): Terminating (SIGTERM) 12:18:32.708602 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7113): Terminating (SIGTERM) 12:18:32.747644 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7116): Terminating (SIGTERM) 12:18:32.756694 --- ParallelTerminationStrategy: PID 7104 died... 12:18:32.809679 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7104): Terminated: ok {rc=0} 12:18:32.819212 --- ParallelTerminationStrategy: PID 7105 died... 12:18:32.871551 run iperf3-srv_10.42.42.10(pid=7105): Terminated {rc=256} 12:18:32.880928 --- ParallelTerminationStrategy: PID 7106 died... 12:18:32.933275 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7106): Terminated: ok {rc=0} 12:18:32.942703 --- ParallelTerminationStrategy: PID 7107 died... 12:18:32.994865 run iperf3-srv_10.42.42.10(pid=7107): Terminated {rc=256} 12:18:33.004241 --- ParallelTerminationStrategy: PID 7110 died... 12:18:33.056489 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7110): Terminated: ok {rc=0} 12:18:33.065955 --- ParallelTerminationStrategy: PID 7113 died... 12:18:33.118083 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7113): Terminated: ok {rc=0} 12:18:33.127526 --- ParallelTerminationStrategy: PID 7116 died... 12:18:33.180379 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7116): Terminated: ok {rc=0} 12:18:33.263201 bus /gobi_0: Setting Powered False 12:18:34.367972 bus /gobi_0: Setting Powered False 12:18:35.477191 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=7114): Process ended prematurely: osmo-stp_10.42.42.5(pid=7114) [trial-2374↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7114)]