Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=8039): Process ended prematurely: osmo-stp_10.42.42.5(pid=8039) [trial-2374↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8039)]
Standard Output
---------------------------------------------- trial-2374 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3.py ---------------------------------------------- 12:27:43.895938 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:27:43.907824 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 12:27:44.042668 tst iperf3.py: using LAC 28393 12:27:44.158179 tst iperf3.py: using RAC 88 12:27:44.274190 tst iperf3.py: using CellId 28393 12:27:44.403649 tst iperf3.py: using BVCI 28394 12:27:44.428190 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:27:44.439880 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:27:44.451402 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:27:44.463183 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:27:44.474909 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:27:44.487335 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:27:44.499669 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:27:44.511669 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:27:44.523393 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 12:27:44.801244 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 12:27:44.924683 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:27:45.230856 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8031): Launched 12:27:45.484273 run iperf3-srv_10.42.42.10(pid=8032): Launched 12:27:45.663634 tst iperf3.py:8: start network... 12:27:45.786297 run osmo-hlr_10.42.42.2: Starting osmo-hlr 12:27:46.339029 run create_hlr_db(pid=8033): Launched 12:27:46.531885 bus /gobi_6: Setting Powered False 12:27:47.532790 run create_hlr_db(pid=8033): Terminated: ok {rc=0} 12:27:47.973990 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8035): Launched 12:27:48.291588 run osmo-hlr_10.42.42.2(pid=8036): Launched 12:27:48.407693 run osmo-stp_10.42.42.5: Starting osmo-stp 12:27:48.958534 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8038): Launched 12:27:49.275853 run osmo-stp_10.42.42.5(pid=8039): Launched 12:27:49.391455 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 12:27:49.945706 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8041): Launched 12:27:50.059117 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 12:27:50.335750 run patchelf(pid=8042): Launched 12:27:50.522058 run osmo-stp_10.42.42.5(pid=8039): ERR: Terminated: ERROR {rc=1} [trial-2374↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8039)] 12:27:50.658302 run osmo-stp_10.42.42.5(pid=8039): stdout: | (launched: 2022-12-10_12:27:49.119966) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:27:50.795402 run osmo-stp_10.42.42.5(pid=8039): stderr: | �[0;m�[38;5;43m20221210122749313 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210122749314 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210122749314 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210122749314 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210122749315 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210122749315 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210122749315 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:27:50.927834 run osmo-stp_10.42.42.5(pid=8039): stdout: | (launched: 2022-12-10_12:27:49.119966) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:27:51.058652 run osmo-stp_10.42.42.5(pid=8039): stderr: | �[0;m�[38;5;43m20221210122749313 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210122749314 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210122749314 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210122749314 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210122749315 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210122749315 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210122749315 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:27:51.210582 run patchelf(pid=8042): Terminating (SIGINT) 12:27:51.388670 run patchelf(pid=8042): Terminated: ok {rc=0} 12:27:51.421462 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=8039): Process ended prematurely: osmo-stp_10.42.42.5(pid=8039) [trial-2374↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8039)] [trial-2374↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8] 12:27:51.431360 tst iperf3.py:8: Test FAILED (7.6 sec) 12:27:51.494348 run osmo-hlr_10.42.42.2(pid=8036): ERR: Terminated: ERROR {rc=237} [trial-2374↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8036)] 12:27:51.545515 run osmo-hlr_10.42.42.2(pid=8036): stdout: | (launched: 2022-12-10_12:27:48.135227) 12:27:51.597309 run osmo-hlr_10.42.42.2(pid=8036): stderr: | �[0;m�[1;31m20221210122748333 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210122748333 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210122748333 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210122748333 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210122748333 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210122748333 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210122748345 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2374/run.2022-12-10_11-15-10/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210122748353 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210122748353 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210122748353 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 12:27:51.641418 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8031): Terminating (SIGTERM) 12:27:51.682728 run iperf3-srv_10.42.42.10(pid=8032): Terminating (SIGTERM) 12:27:51.724366 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8035): Terminating (SIGTERM) 12:27:51.766153 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8038): Terminating (SIGTERM) 12:27:51.808088 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8041): Terminating (SIGTERM) 12:27:51.817619 --- ParallelTerminationStrategy: PID 8031 died... 12:27:51.873184 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8031): Terminated: ok {rc=0} 12:27:51.883338 --- ParallelTerminationStrategy: PID 8032 died... 12:27:51.938967 run iperf3-srv_10.42.42.10(pid=8032): Terminated {rc=256} 12:27:51.949249 --- ParallelTerminationStrategy: PID 8035 died... 12:27:52.004565 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8035): Terminated: ok {rc=0} 12:27:52.014436 --- ParallelTerminationStrategy: PID 8038 died... 12:27:52.069568 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8038): Terminated: ok {rc=0} 12:27:52.079638 --- ParallelTerminationStrategy: PID 8041 died... 12:27:52.134745 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8041): Terminated: ok {rc=0} 12:27:52.221434 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8039): Process ended prematurely: osmo-stp_10.42.42.5(pid=8039) [trial-2374↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8039)]