Failed
gprs:oc2g+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=2395): Process ended prematurely: osmo-stp_10.42.42.5(pid=2395) [trial-2374↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2395)]
Standard Output
---------------------------------------------- trial-2374 gprs:oc2g+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 11:30:59.010610 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:30:59.021656 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 11:30:59.170658 tst cs_paging_gprs_active.py: using LAC 28090 11:30:59.295990 tst cs_paging_gprs_active.py: using RAC 40 11:30:59.422939 tst cs_paging_gprs_active.py: using CellId 28090 11:30:59.548111 tst cs_paging_gprs_active.py: using BVCI 28091 11:30:59.572583 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:30:59.583766 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:30:59.594726 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:30:59.605797 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:30:59.616637 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:30:59.627597 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:30:59.638637 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:30:59.649416 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:30:59.660486 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 11:30:59.776529 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 11:31:00.053937 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 11:31:00.178657 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:31:00.487529 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2385): Launched 11:31:00.744853 run iperf3-srv_10.42.42.10(pid=2386): Launched 11:31:00.953570 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 11:31:01.118334 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:31:01.460836 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2387): Launched 11:31:01.742593 run iperf3-srv_10.42.42.10(pid=2388): Launched 11:31:01.932236 tst cs_paging_gprs_active.py:38: start network... 11:31:02.061731 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:31:02.536419 run create_hlr_db(pid=2389): Launched 11:31:02.708107 bus /gobi_6: Setting Powered False 11:31:03.729286 run create_hlr_db(pid=2389): Terminated: ok {rc=0} 11:31:04.127033 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2391): Launched 11:31:04.426061 run osmo-hlr_10.42.42.2(pid=2392): Launched 11:31:04.535268 run osmo-stp_10.42.42.5: Starting osmo-stp 11:31:05.051232 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2394): Launched 11:31:05.349264 run osmo-stp_10.42.42.5(pid=2395): Launched 11:31:05.462553 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:31:05.982784 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2397): Launched 11:31:06.089450 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:31:06.349661 run patchelf(pid=2398): Launched 11:31:06.524420 run osmo-stp_10.42.42.5(pid=2395): ERR: Terminated: ERROR {rc=1} [trial-2374↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2395)] 11:31:06.652441 run osmo-stp_10.42.42.5(pid=2395): stdout: | (launched: 2022-12-10_11:31:05.202681) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:31:06.781111 run osmo-stp_10.42.42.5(pid=2395): stderr: | �[0;m�[38;5;43m20221210113105372 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210113105373 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210113105373 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210113105373 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210113105374 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210113105374 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210113105374 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:31:06.904900 run osmo-stp_10.42.42.5(pid=2395): stdout: | (launched: 2022-12-10_11:31:05.202681) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:31:07.027719 run osmo-stp_10.42.42.5(pid=2395): stderr: | �[0;m�[38;5;43m20221210113105372 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210113105373 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210113105373 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210113105373 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210113105374 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210113105374 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210113105374 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:31:07.170777 run patchelf(pid=2398): Terminating (SIGINT) 11:31:07.338262 run patchelf(pid=2398): Terminated: ok {rc=0} 11:31:07.369054 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=2395): Process ended prematurely: osmo-stp_10.42.42.5(pid=2395) [trial-2374↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2395)] [trial-2374↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 11:31:07.378075 tst cs_paging_gprs_active.py:38: Test FAILED (8.4 sec) 11:31:07.437756 run osmo-hlr_10.42.42.2(pid=2392): ERR: Terminated: ERROR {rc=237} [trial-2374↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=2392)] 11:31:07.486222 run osmo-hlr_10.42.42.2(pid=2392): stdout: | (launched: 2022-12-10_11:31:04.278480) 11:31:07.535469 run osmo-hlr_10.42.42.2(pid=2392): stderr: | �[0;m�[1;31m20221210113104456 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210113104456 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210113104456 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210113104456 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210113104456 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210113104457 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210113104468 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2374/run.2022-12-10_11-15-10/gprs:oc2g+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210113104477 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210113104477 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210113104477 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:31:07.577230 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2385): Terminating (SIGTERM) 11:31:07.616789 run iperf3-srv_10.42.42.10(pid=2386): Terminating (SIGTERM) 11:31:07.656640 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2387): Terminating (SIGTERM) 11:31:07.695978 run iperf3-srv_10.42.42.10(pid=2388): Terminating (SIGTERM) 11:31:07.735666 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2391): Terminating (SIGTERM) 11:31:07.775659 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2394): Terminating (SIGTERM) 11:31:07.815328 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2397): Terminating (SIGTERM) 11:31:07.824672 --- ParallelTerminationStrategy: PID 2385 died... 11:31:07.877834 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2385): Terminated: ok {rc=0} 11:31:07.887372 --- ParallelTerminationStrategy: PID 2386 died... 11:31:07.939686 run iperf3-srv_10.42.42.10(pid=2386): Terminated {rc=256} 11:31:07.949319 --- ParallelTerminationStrategy: PID 2387 died... 11:31:08.001419 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2387): Terminated: ok {rc=0} 11:31:08.010900 --- ParallelTerminationStrategy: PID 2388 died... 11:31:08.063275 run iperf3-srv_10.42.42.10(pid=2388): Terminated {rc=256} 11:31:08.072607 --- ParallelTerminationStrategy: PID 2391 died... 11:31:08.124895 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2391): Terminated: ok {rc=0} 11:31:08.134567 --- ParallelTerminationStrategy: PID 2394 died... 11:31:08.187521 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2394): Terminated: ok {rc=0} 11:31:08.197275 --- ParallelTerminationStrategy: PID 2397 died... 11:31:08.249893 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2397): Terminated: ok {rc=0} 11:31:08.333019 bus /gobi_0: Setting Powered False 11:31:09.438227 bus /gobi_0: Setting Powered False 11:31:10.548699 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=2395): Process ended prematurely: osmo-stp_10.42.42.5(pid=2395) [trial-2374↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2395)]