Failed
gprs:sysmo+mod-bts0-dynts-ipa.ping_idle_ping.py (from gprs_sysmo+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=1844): Process ended prematurely: osmo-stp_10.42.42.5(pid=1844) [trial-2374↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1844)]
Standard Output
---------------------------------------------- trial-2374 gprs:sysmo+mod-bts0-dynts-ipa ping_idle_ping.py ---------------------------------------------- 11:23:56.464591 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:23:56.477245 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 11:23:56.632164 tst ping_idle_ping.py: using LAC 28052 11:23:56.764460 tst ping_idle_ping.py: using RAC 2 11:23:56.890762 tst ping_idle_ping.py: using CellId 28052 11:23:57.018084 tst ping_idle_ping.py: using BVCI 28053 11:23:57.043119 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:23:57.054720 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:23:57.066099 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:23:57.077388 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:23:57.088541 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:23:57.099827 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:23:57.111276 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:23:57.122630 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 11:23:57.403660 tst ping_idle_ping.py:24: start network... 11:23:57.531372 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:23:58.016836 run create_hlr_db(pid=1838): Launched 11:23:58.193732 bus /gobi_6: Setting Powered False 11:23:59.214101 run create_hlr_db(pid=1838): Terminated: ok {rc=0} 11:23:59.650183 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1840): Launched 11:23:59.981587 run osmo-hlr_10.42.42.2(pid=1841): Launched 11:24:00.100798 run osmo-stp_10.42.42.5: Starting osmo-stp 11:24:00.668392 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1843): Launched 11:24:01.058568 run osmo-stp_10.42.42.5(pid=1844): Launched 11:24:01.237557 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:24:01.889232 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1846): Launched 11:24:02.008254 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:24:02.309792 run patchelf(pid=1847): Launched 11:24:02.499631 run osmo-stp_10.42.42.5(pid=1844): ERR: Terminated: ERROR {rc=1} [trial-2374↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1844)] 11:24:02.639168 run osmo-stp_10.42.42.5(pid=1844): stdout: | (launched: 2022-12-10_11:24:00.842988) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:24:02.778489 run osmo-stp_10.42.42.5(pid=1844): stderr: | �[0;m�[38;5;43m20221210112401169 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210112401169 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210112401176 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210112401176 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210112401181 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210112401181 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210112401181 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:24:02.913404 run osmo-stp_10.42.42.5(pid=1844): stdout: | (launched: 2022-12-10_11:24:00.842988) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:24:03.047111 run osmo-stp_10.42.42.5(pid=1844): stderr: | �[0;m�[38;5;43m20221210112401169 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210112401169 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210112401176 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210112401176 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210112401181 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210112401181 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210112401181 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:24:03.202112 run patchelf(pid=1847): Terminating (SIGINT) 11:24:03.383702 run patchelf(pid=1847): Terminated: ok {rc=0} 11:24:03.416551 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=1844): Process ended prematurely: osmo-stp_10.42.42.5(pid=1844) [trial-2374↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1844)] [trial-2374↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27] 11:24:03.425992 tst ping_idle_ping.py:27: Test FAILED (6.9 sec) 11:24:03.488854 run osmo-hlr_10.42.42.2(pid=1841): ERR: Terminated: ERROR {rc=237} [trial-2374↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=1841)] 11:24:03.540494 run osmo-hlr_10.42.42.2(pid=1841): stdout: | (launched: 2022-12-10_11:23:59.816360) 11:24:03.592539 run osmo-hlr_10.42.42.2(pid=1841): stderr: | �[0;m�[1;31m20221210112400018 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210112400018 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210112400018 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210112400018 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210112400018 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210112400018 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210112400032 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2374/run.2022-12-10_11-15-10/gprs:sysmo+mod-bts0-dynts-ipa/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210112400040 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210112400040 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210112400040 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:24:03.637116 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1840): Terminating (SIGTERM) 11:24:03.679363 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1843): Terminating (SIGTERM) 11:24:03.721748 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1846): Terminating (SIGTERM) 11:24:03.731564 --- ParallelTerminationStrategy: PID 1840 died... 11:24:03.788153 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1840): Terminated: ok {rc=0} 11:24:03.798449 --- ParallelTerminationStrategy: PID 1843 died... 11:24:03.854679 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1843): Terminated: ok {rc=0} 11:24:03.864915 --- ParallelTerminationStrategy: PID 1846 died... 11:24:03.921529 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1846): Terminated: ok {rc=0} 11:24:04.010013 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=1844): Process ended prematurely: osmo-stp_10.42.42.5(pid=1844) [trial-2374↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1844)]