Failed
gprs:sysmo+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=1451): Process ended prematurely: osmo-stp_10.42.42.5(pid=1451) [trial-2374↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1451)]
Standard Output
---------------------------------------------- trial-2374 gprs:sysmo+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 11:22:02.203663 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:22:02.215487 tst gprs:sysmo+mod-bts0-egprs: Using 1 x bts (candidates: 1) 11:22:02.342234 tst cs_paging_gprs_active.py: using LAC 28043 11:22:02.465990 tst cs_paging_gprs_active.py: using RAC 248 11:22:02.589066 tst cs_paging_gprs_active.py: using CellId 28043 11:22:02.709789 tst cs_paging_gprs_active.py: using BVCI 28044 11:22:02.733661 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:22:02.744448 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:22:02.755026 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:22:02.765847 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:22:02.776570 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:22:02.787326 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:22:02.798225 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:22:02.808935 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:22:02.819935 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 11:22:02.939421 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 11:22:03.226053 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 11:22:03.355487 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:22:03.679534 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1441): Launched 11:22:03.948365 run iperf3-srv_10.42.42.10(pid=1442): Launched 11:22:04.138750 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 11:22:04.268668 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:22:04.592701 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1443): Launched 11:22:04.861775 run iperf3-srv_10.42.42.10(pid=1444): Launched 11:22:05.051669 tst cs_paging_gprs_active.py:38: start network... 11:22:05.181769 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:22:05.672419 run create_hlr_db(pid=1445): Launched 11:22:05.851190 bus /gobi_6: Setting Powered False 11:22:06.871866 run create_hlr_db(pid=1445): Terminated: ok {rc=0} 11:22:07.287759 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1447): Launched 11:22:07.600676 run osmo-hlr_10.42.42.2(pid=1448): Launched 11:22:07.719317 run osmo-stp_10.42.42.5: Starting osmo-stp 11:22:08.269624 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1450): Launched 11:22:08.583264 run osmo-stp_10.42.42.5(pid=1451): Launched 11:22:08.697047 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:22:09.239847 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1453): Launched 11:22:09.350855 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:22:09.622900 run patchelf(pid=1454): Launched 11:22:09.804644 run osmo-stp_10.42.42.5(pid=1451): ERR: Terminated: ERROR {rc=1} [trial-2374↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1451)] 11:22:09.937501 run osmo-stp_10.42.42.5(pid=1451): stdout: | (launched: 2022-12-10_11:22:08.427358) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:22:10.070319 run osmo-stp_10.42.42.5(pid=1451): stderr: | �[0;m�[38;5;43m20221210112208603 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210112208603 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210112208603 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210112208604 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210112208604 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210112208604 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210112208604 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:22:10.198224 run osmo-stp_10.42.42.5(pid=1451): stdout: | (launched: 2022-12-10_11:22:08.427358) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:22:10.325701 run osmo-stp_10.42.42.5(pid=1451): stderr: | �[0;m�[38;5;43m20221210112208603 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210112208603 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210112208603 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210112208604 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210112208604 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210112208604 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210112208604 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:22:10.473897 run patchelf(pid=1454): Terminating (SIGINT) 11:22:10.647526 run patchelf(pid=1454): Terminated: ok {rc=0} 11:22:10.679518 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=1451): Process ended prematurely: osmo-stp_10.42.42.5(pid=1451) [trial-2374↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1451)] [trial-2374↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 11:22:10.688761 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 11:22:10.749776 run osmo-hlr_10.42.42.2(pid=1448): ERR: Terminated: ERROR {rc=237} [trial-2374↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=1448)] 11:22:10.799572 run osmo-hlr_10.42.42.2(pid=1448): stdout: | (launched: 2022-12-10_11:22:07.445424) 11:22:10.849985 run osmo-hlr_10.42.42.2(pid=1448): stderr: | �[0;m�[1;31m20221210112207624 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210112207624 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210112207624 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210112207624 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210112207625 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210112207625 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210112207640 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2374/run.2022-12-10_11-15-10/gprs:sysmo+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210112207648 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210112207648 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210112207648 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:22:10.892636 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1441): Terminating (SIGTERM) 11:22:10.933209 run iperf3-srv_10.42.42.10(pid=1442): Terminating (SIGTERM) 11:22:10.973758 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1443): Terminating (SIGTERM) 11:22:11.014449 run iperf3-srv_10.42.42.10(pid=1444): Terminating (SIGTERM) 11:22:11.054767 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1447): Terminating (SIGTERM) 11:22:11.095328 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1450): Terminating (SIGTERM) 11:22:11.135954 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1453): Terminating (SIGTERM) 11:22:11.145523 --- ParallelTerminationStrategy: PID 1441 died... 11:22:11.199685 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1441): Terminated: ok {rc=0} 11:22:11.209640 --- ParallelTerminationStrategy: PID 1442 died... 11:22:11.263035 run iperf3-srv_10.42.42.10(pid=1442): Terminated {rc=256} 11:22:11.272798 --- ParallelTerminationStrategy: PID 1443 died... 11:22:11.327000 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1443): Terminated: ok {rc=0} 11:22:11.336555 --- ParallelTerminationStrategy: PID 1444 died... 11:22:11.389947 run iperf3-srv_10.42.42.10(pid=1444): Terminated {rc=256} 11:22:11.399537 --- ParallelTerminationStrategy: PID 1447 died... 11:22:11.452757 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1447): Terminated: ok {rc=0} 11:22:11.462559 --- ParallelTerminationStrategy: PID 1450 died... 11:22:11.516217 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1450): Terminated: ok {rc=0} 11:22:11.525952 --- ParallelTerminationStrategy: PID 1453 died... 11:22:11.580145 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1453): Terminated: ok {rc=0} 11:22:11.669630 bus /gobi_0: Setting Powered False 11:22:12.773157 bus /gobi_0: Setting Powered False 11:22:13.885486 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=1451): Process ended prematurely: osmo-stp_10.42.42.5(pid=1451) [trial-2374↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1451)]