Failed
gprs:trx-b200+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=3263): Process ended prematurely: osmo-stp_10.42.42.5(pid=3263) [trial-2374↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3263)]
Standard Output
---------------------------------------------- trial-2374 gprs:trx-b200+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 11:39:32.880299 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:39:32.891199 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 11:39:33.050986 tst cs_paging_gprs_active.py: using LAC 28136 11:39:33.166971 tst cs_paging_gprs_active.py: using RAC 86 11:39:33.285100 tst cs_paging_gprs_active.py: using CellId 28136 11:39:33.400629 tst cs_paging_gprs_active.py: using BVCI 28137 11:39:33.423432 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:39:33.434218 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:39:33.444766 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:39:33.455697 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:39:33.466703 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:39:33.477659 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:39:33.488590 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:39:33.499518 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:39:33.510509 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 11:39:33.626976 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 11:39:33.903136 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 11:39:34.028674 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:39:34.340491 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3253): Launched 11:39:34.599219 run iperf3-srv_10.42.42.10(pid=3254): Launched 11:39:34.782881 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 11:39:34.907851 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:39:35.219081 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3255): Launched 11:39:35.476734 run iperf3-srv_10.42.42.10(pid=3256): Launched 11:39:35.660196 tst cs_paging_gprs_active.py:38: start network... 11:39:35.785369 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:39:36.257715 run create_hlr_db(pid=3257): Launched 11:39:36.430691 bus /gobi_6: Setting Powered False 11:39:37.451458 run create_hlr_db(pid=3257): Terminated: ok {rc=0} 11:39:37.852824 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3259): Launched 11:39:38.154526 run osmo-hlr_10.42.42.2(pid=3260): Launched 11:39:38.269551 run osmo-stp_10.42.42.5: Starting osmo-stp 11:39:38.790682 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3262): Launched 11:39:39.090536 run osmo-stp_10.42.42.5(pid=3263): Launched 11:39:39.200383 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:39:39.723190 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3265): Launched 11:39:39.829974 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:39:40.092688 run patchelf(pid=3266): Launched 11:39:40.268822 run osmo-stp_10.42.42.5(pid=3263): ERR: Terminated: ERROR {rc=1} [trial-2374↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3263)] 11:39:40.398032 run osmo-stp_10.42.42.5(pid=3263): stdout: | (launched: 2022-12-10_11:39:38.942581) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:39:40.527228 run osmo-stp_10.42.42.5(pid=3263): stderr: | �[0;m�[38;5;43m20221210113939114 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210113939114 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210113939114 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210113939114 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210113939115 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210113939115 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210113939115 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:39:40.651572 run osmo-stp_10.42.42.5(pid=3263): stdout: | (launched: 2022-12-10_11:39:38.942581) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:39:40.774732 run osmo-stp_10.42.42.5(pid=3263): stderr: | �[0;m�[38;5;43m20221210113939114 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210113939114 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210113939114 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210113939114 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210113939115 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210113939115 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210113939115 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:39:40.918771 run patchelf(pid=3266): Terminating (SIGINT) 11:39:41.087203 run patchelf(pid=3266): Terminated: ok {rc=0} 11:39:41.118290 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=3263): Process ended prematurely: osmo-stp_10.42.42.5(pid=3263) [trial-2374↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3263)] [trial-2374↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 11:39:41.127433 tst cs_paging_gprs_active.py:38: Test FAILED (8.3 sec) 11:39:41.187543 run osmo-hlr_10.42.42.2(pid=3260): ERR: Terminated: ERROR {rc=237} [trial-2374↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=3260)] 11:39:41.236415 run osmo-hlr_10.42.42.2(pid=3260): stdout: | (launched: 2022-12-10_11:39:38.006009) 11:39:41.286030 run osmo-hlr_10.42.42.2(pid=3260): stderr: | �[0;m�[1;31m20221210113938181 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210113938181 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210113938181 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210113938181 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210113938181 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210113938181 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210113938193 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2374/run.2022-12-10_11-15-10/gprs:trx-b200+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210113938202 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210113938202 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210113938202 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:39:41.327989 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3253): Terminating (SIGTERM) 11:39:41.367709 run iperf3-srv_10.42.42.10(pid=3254): Terminating (SIGTERM) 11:39:41.407384 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3255): Terminating (SIGTERM) 11:39:41.447153 run iperf3-srv_10.42.42.10(pid=3256): Terminating (SIGTERM) 11:39:41.486641 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3259): Terminating (SIGTERM) 11:39:41.526204 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3262): Terminating (SIGTERM) 11:39:41.565964 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3265): Terminating (SIGTERM) 11:39:41.575219 --- ParallelTerminationStrategy: PID 3253 died... 11:39:41.628280 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3253): Terminated: ok {rc=0} 11:39:41.638003 --- ParallelTerminationStrategy: PID 3254 died... 11:39:41.690354 run iperf3-srv_10.42.42.10(pid=3254): Terminated {rc=256} 11:39:41.699955 --- ParallelTerminationStrategy: PID 3255 died... 11:39:41.752560 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3255): Terminated: ok {rc=0} 11:39:41.762000 --- ParallelTerminationStrategy: PID 3256 died... 11:39:41.814254 run iperf3-srv_10.42.42.10(pid=3256): Terminated {rc=256} 11:39:41.823811 --- ParallelTerminationStrategy: PID 3259 died... 11:39:41.876157 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3259): Terminated: ok {rc=0} 11:39:41.885671 --- ParallelTerminationStrategy: PID 3262 died... 11:39:41.938157 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3262): Terminated: ok {rc=0} 11:39:41.947817 --- ParallelTerminationStrategy: PID 3265 died... 11:39:42.000634 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3265): Terminated: ok {rc=0} 11:39:42.087357 bus /gobi_0: Setting Powered False 11:39:43.189014 bus /gobi_0: Setting Powered False 11:39:44.299279 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=3263): Process ended prematurely: osmo-stp_10.42.42.5(pid=3263) [trial-2374↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3263)]