Failed
gprs:trx-b200.cs_paging_gprs_active.py (from gprs_trx-b200)
Stacktrace
osmo-stp_10.42.42.5(pid=2855): Process ended prematurely: osmo-stp_10.42.42.5(pid=2855) [trial-2374↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2855)]
Standard Output
---------------------------------------------- trial-2374 gprs:trx-b200 cs_paging_gprs_active.py ---------------------------------------------- 11:37:30.794549 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 11:37:30.805380 tst gprs:trx-b200: Using 1 x bts (candidates: 1) 11:37:30.957505 tst cs_paging_gprs_active.py: using LAC 28126 11:37:31.096232 tst cs_paging_gprs_active.py: using RAC 76 11:37:31.222903 tst cs_paging_gprs_active.py: using CellId 28126 11:37:31.347407 tst cs_paging_gprs_active.py: using BVCI 28127 11:37:31.371615 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 11:37:31.383250 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 11:37:31.395641 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 11:37:31.408623 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 11:37:31.420450 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 11:37:31.431739 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 11:37:31.445783 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 11:37:31.456882 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 11:37:31.470021 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 11:37:31.618830 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 11:37:31.947774 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 11:37:32.084896 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:37:32.431464 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2840): Launched 11:37:32.708065 run iperf3-srv_10.42.42.10(pid=2841): Launched 11:37:32.905777 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 11:37:33.040572 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:37:33.375025 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2842): Launched 11:37:33.650962 run iperf3-srv_10.42.42.10(pid=2843): Launched 11:37:33.848318 tst cs_paging_gprs_active.py:38: start network... 11:37:33.982650 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:37:34.499302 run create_hlr_db(pid=2844): Launched 11:37:34.685751 bus /sierra_2: Setting Powered False 11:37:35.707275 run create_hlr_db(pid=2844): Terminated: ok {rc=0} 11:37:36.136429 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2851): Launched 11:37:36.458827 run osmo-hlr_10.42.42.2(pid=2852): Launched 11:37:36.575530 run osmo-stp_10.42.42.5: Starting osmo-stp 11:37:37.135186 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2854): Launched 11:37:37.457138 run osmo-stp_10.42.42.5(pid=2855): Launched 11:37:37.573923 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:37:38.135525 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2857): Launched 11:37:38.250331 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:37:38.531320 run patchelf(pid=2858): Launched 11:37:38.719854 run osmo-stp_10.42.42.5(pid=2855): ERR: Terminated: ERROR {rc=1} [trial-2374↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2855)] 11:37:38.858246 run osmo-stp_10.42.42.5(pid=2855): stdout: | (launched: 2022-12-10_11:37:37.299517) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:37:38.996775 run osmo-stp_10.42.42.5(pid=2855): stderr: | �[0;m�[38;5;43m20221210113737492 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210113737492 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210113737492 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210113737493 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210113737493 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210113737493 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210113737493 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:37:39.130552 run osmo-stp_10.42.42.5(pid=2855): stdout: | (launched: 2022-12-10_11:37:37.299517) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:37:39.262843 run osmo-stp_10.42.42.5(pid=2855): stderr: | �[0;m�[38;5;43m20221210113737492 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210113737492 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210113737492 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210113737493 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210113737493 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210113737493 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210113737493 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:37:39.417079 run patchelf(pid=2858): Terminating (SIGINT) 11:37:39.597358 run patchelf(pid=2858): Terminated: ok {rc=0} 11:37:39.630360 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=2855): Process ended prematurely: osmo-stp_10.42.42.5(pid=2855) [trial-2374↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2855)] [trial-2374↪gprs:trx-b200↪cs_paging_gprs_active.py:38] 11:37:39.640163 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 11:37:39.702510 run osmo-hlr_10.42.42.2(pid=2852): ERR: Terminated: ERROR {rc=237} [trial-2374↪gprs:trx-b200↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=2852)] 11:37:39.753478 run osmo-hlr_10.42.42.2(pid=2852): stdout: | (launched: 2022-12-10_11:37:36.301238) 11:37:39.804984 run osmo-hlr_10.42.42.2(pid=2852): stderr: | �[0;m�[1;31m20221210113736499 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210113736499 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210113736500 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210113736500 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210113736500 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210113736500 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210113736511 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2374/run.2022-12-10_11-15-10/gprs:trx-b200/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210113736520 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210113736520 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210113736520 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:37:39.848988 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2840): Terminating (SIGTERM) 11:37:39.890705 run iperf3-srv_10.42.42.10(pid=2841): Terminating (SIGTERM) 11:37:39.932374 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2842): Terminating (SIGTERM) 11:37:39.974035 run iperf3-srv_10.42.42.10(pid=2843): Terminating (SIGTERM) 11:37:40.015789 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2851): Terminating (SIGTERM) 11:37:40.057612 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2854): Terminating (SIGTERM) 11:37:40.099403 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2857): Terminating (SIGTERM) 11:37:40.109111 --- ParallelTerminationStrategy: PID 2840 died... 11:37:40.164822 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2840): Terminated: ok {rc=0} 11:37:40.174930 --- ParallelTerminationStrategy: PID 2841 died... 11:37:40.230379 run iperf3-srv_10.42.42.10(pid=2841): Terminated {rc=256} 11:37:40.240312 --- ParallelTerminationStrategy: PID 2842 died... 11:37:40.296054 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2842): Terminated: ok {rc=0} 11:37:40.306046 --- ParallelTerminationStrategy: PID 2843 died... 11:37:40.361528 run iperf3-srv_10.42.42.10(pid=2843): Terminated {rc=256} 11:37:40.371489 --- ParallelTerminationStrategy: PID 2851 died... 11:37:40.426976 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2851): Terminated: ok {rc=0} 11:37:40.436907 --- ParallelTerminationStrategy: PID 2854 died... 11:37:40.492547 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2854): Terminated: ok {rc=0} 11:37:40.502591 --- ParallelTerminationStrategy: PID 2857 died... 11:37:40.557924 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2857): Terminated: ok {rc=0} 11:37:40.647216 bus /gobi_0: Setting Powered False 11:37:41.754092 bus /gobi_0: Setting Powered False 11:37:42.861408 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=2855): Process ended prematurely: osmo-stp_10.42.42.5(pid=2855) [trial-2374↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2855)]