Failed
gprs:trx-sysmocell5000+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=3816): Process ended prematurely: osmo-stp_10.42.42.5(pid=3816) [trial-2374↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3816)]
Standard Output
---------------------------------------------- trial-2374 gprs:trx-sysmocell5000+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 11:47:22.301575 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:47:22.312292 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x bts (candidates: 1) 11:47:22.450899 tst cs_paging_gprs_active.py: using LAC 28178 11:47:22.568759 tst cs_paging_gprs_active.py: using RAC 128 11:47:22.688499 tst cs_paging_gprs_active.py: using CellId 28178 11:47:22.814832 tst cs_paging_gprs_active.py: using BVCI 28179 11:47:22.839743 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:47:22.851045 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:47:22.862215 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:47:22.873932 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:47:22.885464 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:47:22.897175 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:47:22.908794 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:47:22.920256 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:47:22.932074 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 11:47:23.047984 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 11:47:23.341547 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 11:47:23.475608 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:47:23.807771 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3806): Launched 11:47:24.082351 run iperf3-srv_10.42.42.10(pid=3807): Launched 11:47:24.278861 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 11:47:24.412345 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:47:24.743761 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3808): Launched 11:47:25.018378 run iperf3-srv_10.42.42.10(pid=3809): Launched 11:47:25.214722 tst cs_paging_gprs_active.py:38: start network... 11:47:25.348308 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:47:25.861665 run create_hlr_db(pid=3810): Launched 11:47:26.047575 bus /gobi_6: Setting Powered False 11:47:27.067636 run create_hlr_db(pid=3810): Terminated: ok {rc=0} 11:47:27.471479 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3812): Launched 11:47:27.772527 run osmo-hlr_10.42.42.2(pid=3813): Launched 11:47:27.891095 run osmo-stp_10.42.42.5: Starting osmo-stp 11:47:28.417411 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3815): Launched 11:47:28.717622 run osmo-stp_10.42.42.5(pid=3816): Launched 11:47:28.827471 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:47:29.350965 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3818): Launched 11:47:29.458097 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:47:29.720129 run patchelf(pid=3819): Launched 11:47:29.895480 run osmo-stp_10.42.42.5(pid=3816): ERR: Terminated: ERROR {rc=1} [trial-2374↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3816)] 11:47:30.023482 run osmo-stp_10.42.42.5(pid=3816): stdout: | (launched: 2022-12-10_11:47:28.569818) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:47:30.151994 run osmo-stp_10.42.42.5(pid=3816): stderr: | �[0;m�[38;5;43m20221210114728741 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210114728741 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210114728742 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210114728742 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210114728742 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210114728743 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210114728743 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:47:30.275919 run osmo-stp_10.42.42.5(pid=3816): stdout: | (launched: 2022-12-10_11:47:28.569818) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:47:30.399088 run osmo-stp_10.42.42.5(pid=3816): stderr: | �[0;m�[38;5;43m20221210114728741 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210114728741 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210114728742 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210114728742 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210114728742 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210114728743 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210114728743 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:47:30.542547 run patchelf(pid=3819): Terminating (SIGINT) 11:47:30.710561 run patchelf(pid=3819): Terminated: ok {rc=0} 11:47:30.741498 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=3816): Process ended prematurely: osmo-stp_10.42.42.5(pid=3816) [trial-2374↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3816)] [trial-2374↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 11:47:30.750697 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 11:47:30.810612 run osmo-hlr_10.42.42.2(pid=3813): ERR: Terminated: ERROR {rc=237} [trial-2374↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=3813)] 11:47:30.860616 run osmo-hlr_10.42.42.2(pid=3813): stdout: | (launched: 2022-12-10_11:47:27.624366) 11:47:30.917598 run osmo-hlr_10.42.42.2(pid=3813): stderr: | �[0;m�[1;31m20221210114727799 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210114727799 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210114727799 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210114727799 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210114727799 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210114727799 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210114727811 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2374/run.2022-12-10_11-15-10/gprs:trx-sysmocell5000+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210114727820 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210114727820 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210114727820 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:47:30.960483 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3806): Terminating (SIGTERM) 11:47:31.002661 run iperf3-srv_10.42.42.10(pid=3807): Terminating (SIGTERM) 11:47:31.046754 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3808): Terminating (SIGTERM) 11:47:31.090722 run iperf3-srv_10.42.42.10(pid=3809): Terminating (SIGTERM) 11:47:31.133266 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3812): Terminating (SIGTERM) 11:47:31.177310 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3815): Terminating (SIGTERM) 11:47:31.219051 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3818): Terminating (SIGTERM) 11:47:31.230620 --- ParallelTerminationStrategy: PID 3806 died... 11:47:31.286042 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3806): Terminated: ok {rc=0} 11:47:31.296505 --- ParallelTerminationStrategy: PID 3807 died... 11:47:31.350887 run iperf3-srv_10.42.42.10(pid=3807): Terminated {rc=256} 11:47:31.361861 --- ParallelTerminationStrategy: PID 3808 died... 11:47:31.416817 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3808): Terminated: ok {rc=0} 11:47:31.427294 --- ParallelTerminationStrategy: PID 3809 died... 11:47:31.481985 run iperf3-srv_10.42.42.10(pid=3809): Terminated {rc=256} 11:47:31.492318 --- ParallelTerminationStrategy: PID 3812 died... 11:47:31.546417 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3812): Terminated: ok {rc=0} 11:47:31.557499 --- ParallelTerminationStrategy: PID 3815 died... 11:47:31.611771 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3815): Terminated: ok {rc=0} 11:47:31.622639 --- ParallelTerminationStrategy: PID 3818 died... 11:47:31.677837 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3818): Terminated: ok {rc=0} 11:47:31.763187 bus /gobi_0: Setting Powered False 11:47:32.862574 bus /gobi_0: Setting Powered False 11:47:33.972379 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=3816): Process ended prematurely: osmo-stp_10.42.42.5(pid=3816) [trial-2374↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3816)]