Failed
gprs:trx-umtrx+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=4804): Process ended prematurely: osmo-stp_10.42.42.5(pid=4804) [trial-2374↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4804)]
Standard Output
---------------------------------------------- trial-2374 gprs:trx-umtrx+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 11:57:34.049989 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:57:34.061265 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 11:57:34.228000 tst cs_paging_gprs_active.py: using LAC 28232 11:57:34.352196 tst cs_paging_gprs_active.py: using RAC 182 11:57:34.475519 tst cs_paging_gprs_active.py: using CellId 28232 11:57:34.600540 tst cs_paging_gprs_active.py: using BVCI 28233 11:57:34.625050 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:57:34.636216 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:57:34.647315 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:57:34.658570 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:57:34.669810 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:57:34.681130 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:57:34.692446 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:57:34.703764 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:57:34.715297 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 11:57:34.833563 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 11:57:35.129712 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 11:57:35.263421 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:57:35.594636 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4791): Launched 11:57:35.869453 run iperf3-srv_10.42.42.10(pid=4792): Launched 11:57:36.065773 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 11:57:36.191603 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:57:36.502856 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4796): Launched 11:57:36.761113 run iperf3-srv_10.42.42.10(pid=4797): Launched 11:57:36.943138 tst cs_paging_gprs_active.py:38: start network... 11:57:37.067246 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:57:37.552334 run create_hlr_db(pid=4798): Launched 11:57:37.737526 bus /gobi_6: Setting Powered False 11:57:38.758575 run create_hlr_db(pid=4798): Terminated: ok {rc=0} 11:57:39.161276 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4800): Launched 11:57:39.460311 run osmo-hlr_10.42.42.2(pid=4801): Launched 11:57:39.571122 run osmo-stp_10.42.42.5: Starting osmo-stp 11:57:40.091252 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4803): Launched 11:57:40.391344 run osmo-stp_10.42.42.5(pid=4804): Launched 11:57:40.500617 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:57:41.021825 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4806): Launched 11:57:41.128319 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:57:41.390447 run patchelf(pid=4807): Launched 11:57:41.565093 run osmo-stp_10.42.42.5(pid=4804): ERR: Terminated: ERROR {rc=1} [trial-2374↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4804)] 11:57:41.692356 run osmo-stp_10.42.42.5(pid=4804): stdout: | (launched: 2022-12-10_11:57:40.242916) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:57:41.820232 run osmo-stp_10.42.42.5(pid=4804): stderr: | �[0;m�[38;5;43m20221210115740415 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210115740416 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210115740416 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210115740416 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210115740417 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210115740417 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210115740417 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:57:41.944293 run osmo-stp_10.42.42.5(pid=4804): stdout: | (launched: 2022-12-10_11:57:40.242916) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:57:42.066707 run osmo-stp_10.42.42.5(pid=4804): stderr: | �[0;m�[38;5;43m20221210115740415 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210115740416 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210115740416 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210115740416 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210115740417 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210115740417 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210115740417 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:57:42.209699 run patchelf(pid=4807): Terminating (SIGINT) 11:57:42.377738 run patchelf(pid=4807): Terminated: ok {rc=0} 11:57:42.408638 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=4804): Process ended prematurely: osmo-stp_10.42.42.5(pid=4804) [trial-2374↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4804)] [trial-2374↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 11:57:42.417889 tst cs_paging_gprs_active.py:38: Test FAILED (8.4 sec) 11:57:42.477728 run osmo-hlr_10.42.42.2(pid=4801): ERR: Terminated: ERROR {rc=237} [trial-2374↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=4801)] 11:57:42.526315 run osmo-hlr_10.42.42.2(pid=4801): stdout: | (launched: 2022-12-10_11:57:39.313118) 11:57:42.575615 run osmo-hlr_10.42.42.2(pid=4801): stderr: | �[0;m�[1;31m20221210115739488 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210115739489 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210115739489 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210115739489 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210115739489 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210115739489 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210115739501 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2374/run.2022-12-10_11-15-10/gprs:trx-umtrx+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210115739510 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210115739511 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210115739511 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:57:42.617223 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4791): Terminating (SIGTERM) 11:57:42.656546 run iperf3-srv_10.42.42.10(pid=4792): Terminating (SIGTERM) 11:57:42.695791 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4796): Terminating (SIGTERM) 11:57:42.734912 run iperf3-srv_10.42.42.10(pid=4797): Terminating (SIGTERM) 11:57:42.774187 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4800): Terminating (SIGTERM) 11:57:42.813332 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4803): Terminating (SIGTERM) 11:57:42.852678 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4806): Terminating (SIGTERM) 11:57:42.861946 --- ParallelTerminationStrategy: PID 4791 died... 11:57:42.914642 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4791): Terminated: ok {rc=0} 11:57:42.923877 --- ParallelTerminationStrategy: PID 4792 died... 11:57:42.975901 run iperf3-srv_10.42.42.10(pid=4792): Terminated {rc=256} 11:57:42.985862 --- ParallelTerminationStrategy: PID 4796 died... 11:57:43.038736 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4796): Terminated: ok {rc=0} 11:57:43.048126 --- ParallelTerminationStrategy: PID 4797 died... 11:57:43.100255 run iperf3-srv_10.42.42.10(pid=4797): Terminated {rc=256} 11:57:43.110170 --- ParallelTerminationStrategy: PID 4800 died... 11:57:43.163106 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4800): Terminated: ok {rc=0} 11:57:43.172679 --- ParallelTerminationStrategy: PID 4803 died... 11:57:43.224771 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4803): Terminated: ok {rc=0} 11:57:43.234365 --- ParallelTerminationStrategy: PID 4806 died... 11:57:43.286773 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4806): Terminated: ok {rc=0} 11:57:43.374915 bus /gobi_0: Setting Powered False 11:57:44.477546 bus /gobi_0: Setting Powered False 11:57:45.588252 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=4804): Process ended prematurely: osmo-stp_10.42.42.5(pid=4804) [trial-2374↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4804)]