Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=8027): Process ended prematurely: osmo-stp_10.42.42.5(pid=8027) [trial-2374↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8027)]
Standard Output
---------------------------------------------- trial-2374 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 12:27:31.082989 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:27:31.094574 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 12:27:31.227878 tst cs_paging_gprs_active.py: using LAC 28392 12:27:31.350084 tst cs_paging_gprs_active.py: using RAC 87 12:27:31.477579 tst cs_paging_gprs_active.py: using CellId 28392 12:27:31.605891 tst cs_paging_gprs_active.py: using BVCI 28393 12:27:31.632208 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:27:31.644796 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:27:31.658477 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:27:31.672494 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:27:31.685616 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:27:31.699095 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:27:31.712706 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:27:31.725404 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:27:31.739267 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 12:27:31.869881 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 12:27:32.172724 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 12:27:32.308504 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:27:32.637286 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8017): Launched 12:27:32.910264 run iperf3-srv_10.42.42.10(pid=8018): Launched 12:27:33.105095 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 12:27:33.237710 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:27:33.566025 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8019): Launched 12:27:33.838329 run iperf3-srv_10.42.42.10(pid=8020): Launched 12:27:34.032885 tst cs_paging_gprs_active.py:38: start network... 12:27:34.165515 run osmo-hlr_10.42.42.2: Starting osmo-hlr 12:27:34.664565 run create_hlr_db(pid=8021): Launched 12:27:34.849578 bus /gobi_6: Setting Powered False 12:27:35.869970 run create_hlr_db(pid=8021): Terminated: ok {rc=0} 12:27:36.294914 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8023): Launched 12:27:36.611757 run osmo-hlr_10.42.42.2(pid=8024): Launched 12:27:36.729080 run osmo-stp_10.42.42.5: Starting osmo-stp 12:27:37.280024 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8026): Launched 12:27:37.577601 run osmo-stp_10.42.42.5(pid=8027): Launched 12:27:37.686183 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 12:27:38.204366 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8029): Launched 12:27:38.309547 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 12:27:38.567557 run patchelf(pid=8030): Launched 12:27:38.741285 run osmo-stp_10.42.42.5(pid=8027): ERR: Terminated: ERROR {rc=1} [trial-2374↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8027)] 12:27:38.869195 run osmo-stp_10.42.42.5(pid=8027): stdout: | (launched: 2022-12-10_12:27:37.431217) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:27:38.996432 run osmo-stp_10.42.42.5(pid=8027): stderr: | �[0;m�[38;5;43m20221210122737601 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210122737601 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210122737601 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210122737602 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210122737602 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210122737602 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210122737602 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:27:39.119204 run osmo-stp_10.42.42.5(pid=8027): stdout: | (launched: 2022-12-10_12:27:37.431217) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:27:39.240473 run osmo-stp_10.42.42.5(pid=8027): stderr: | �[0;m�[38;5;43m20221210122737601 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210122737601 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210122737601 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210122737602 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210122737602 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210122737602 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210122737602 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:27:39.382563 run patchelf(pid=8030): Terminating (SIGINT) 12:27:39.549484 run patchelf(pid=8030): Terminated: ok {rc=0} 12:27:39.580282 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=8027): Process ended prematurely: osmo-stp_10.42.42.5(pid=8027) [trial-2374↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8027)] [trial-2374↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 12:27:39.589439 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 12:27:39.648399 run osmo-hlr_10.42.42.2(pid=8024): ERR: Terminated: ERROR {rc=237} [trial-2374↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8024)] 12:27:39.696809 run osmo-hlr_10.42.42.2(pid=8024): stdout: | (launched: 2022-12-10_12:27:36.456169) 12:27:39.745965 run osmo-hlr_10.42.42.2(pid=8024): stderr: | �[0;m�[1;31m20221210122736653 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210122736653 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210122736653 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210122736654 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210122736654 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210122736654 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210122736666 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2374/run.2022-12-10_11-15-10/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210122736675 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210122736675 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210122736675 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 12:27:39.787701 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8017): Terminating (SIGTERM) 12:27:39.826992 run iperf3-srv_10.42.42.10(pid=8018): Terminating (SIGTERM) 12:27:39.866349 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8019): Terminating (SIGTERM) 12:27:39.905496 run iperf3-srv_10.42.42.10(pid=8020): Terminating (SIGTERM) 12:27:39.945248 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8023): Terminating (SIGTERM) 12:27:39.988736 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8026): Terminating (SIGTERM) 12:27:40.030568 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8029): Terminating (SIGTERM) 12:27:40.040075 --- ParallelTerminationStrategy: PID 8017 died... 12:27:40.095484 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8017): Terminated: ok {rc=0} 12:27:40.105753 --- ParallelTerminationStrategy: PID 8018 died... 12:27:40.161335 run iperf3-srv_10.42.42.10(pid=8018): Terminated {rc=256} 12:27:40.171430 --- ParallelTerminationStrategy: PID 8019 died... 12:27:40.226914 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8019): Terminated: ok {rc=0} 12:27:40.236661 --- ParallelTerminationStrategy: PID 8020 died... 12:27:40.291670 run iperf3-srv_10.42.42.10(pid=8020): Terminated {rc=256} 12:27:40.301791 --- ParallelTerminationStrategy: PID 8023 died... 12:27:40.357557 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8023): Terminated: ok {rc=0} 12:27:40.367532 --- ParallelTerminationStrategy: PID 8026 died... 12:27:40.422861 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8026): Terminated: ok {rc=0} 12:27:40.432798 --- ParallelTerminationStrategy: PID 8029 died... 12:27:40.488262 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8029): Terminated: ok {rc=0} 12:27:40.575334 bus /gobi_0: Setting Powered False 12:27:41.682117 bus /gobi_0: Setting Powered False 12:27:42.788901 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8027): Process ended prematurely: osmo-stp_10.42.42.5(pid=8027) [trial-2374↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8027)]