Failed
gprs:oc2g+mod-bts0-dynts-osmo.ping_idle_ping.py (from gprs_oc2g+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=2513): Process ended prematurely: osmo-stp_10.42.42.5(pid=2513) [trial-2374↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2513)]
Standard Output
---------------------------------------------- trial-2374 gprs:oc2g+mod-bts0-dynts-osmo ping_idle_ping.py ---------------------------------------------- 11:32:48.354570 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:32:48.366381 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 11:32:48.510543 tst ping_idle_ping.py: using LAC 28099 11:32:48.628018 tst ping_idle_ping.py: using RAC 49 11:32:48.745368 tst ping_idle_ping.py: using CellId 28099 11:32:48.868598 tst ping_idle_ping.py: using BVCI 28100 11:32:48.892754 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:32:48.904200 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:32:48.915474 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:32:48.926770 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:32:48.937808 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:32:48.948700 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:32:48.959891 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:32:48.970976 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 11:32:49.257600 tst ping_idle_ping.py:24: start network... 11:32:49.389507 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:32:49.899329 run create_hlr_db(pid=2507): Launched 11:32:50.082330 bus /gobi_6: Setting Powered False 11:32:51.102308 run create_hlr_db(pid=2507): Terminated: ok {rc=0} 11:32:51.495722 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2509): Launched 11:32:51.789600 run osmo-hlr_10.42.42.2(pid=2510): Launched 11:32:51.901131 run osmo-stp_10.42.42.5: Starting osmo-stp 11:32:52.415330 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2512): Launched 11:32:52.709850 run osmo-stp_10.42.42.5(pid=2513): Launched 11:32:52.818180 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:32:53.328465 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2515): Launched 11:32:53.433078 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:32:53.688620 run patchelf(pid=2516): Launched 11:32:53.859977 run osmo-stp_10.42.42.5(pid=2513): ERR: Terminated: ERROR {rc=1} [trial-2374↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2513)] 11:32:53.985457 run osmo-stp_10.42.42.5(pid=2513): stdout: | (launched: 2022-12-10_11:32:52.564477) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:32:54.111203 run osmo-stp_10.42.42.5(pid=2513): stderr: | �[0;m�[38;5;43m20221210113252734 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210113252734 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210113252734 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210113252735 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210113252735 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210113252735 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210113252735 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:32:54.233000 run osmo-stp_10.42.42.5(pid=2513): stdout: | (launched: 2022-12-10_11:32:52.564477) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:32:54.353303 run osmo-stp_10.42.42.5(pid=2513): stderr: | �[0;m�[38;5;43m20221210113252734 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210113252734 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210113252734 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210113252735 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210113252735 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210113252735 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210113252735 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:32:54.493712 run patchelf(pid=2516): Terminating (SIGINT) 11:32:54.658210 run patchelf(pid=2516): Terminated: ok {rc=0} 11:32:54.688224 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=2513): Process ended prematurely: osmo-stp_10.42.42.5(pid=2513) [trial-2374↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2513)] [trial-2374↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27] 11:32:54.696758 tst ping_idle_ping.py:27: Test FAILED (6.3 sec) 11:32:54.756401 run osmo-hlr_10.42.42.2(pid=2510): ERR: Terminated: ERROR {rc=237} [trial-2374↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=2510)] 11:32:54.805072 run osmo-hlr_10.42.42.2(pid=2510): stdout: | (launched: 2022-12-10_11:32:51.645063) 11:32:54.854164 run osmo-hlr_10.42.42.2(pid=2510): stderr: | �[0;m�[1;31m20221210113251821 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210113251821 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210113251821 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210113251821 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210113251821 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210113251821 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210113251833 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2374/run.2022-12-10_11-15-10/gprs:oc2g+mod-bts0-dynts-osmo/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210113251841 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210113251842 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210113251842 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:32:54.895677 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2509): Terminating (SIGTERM) 11:32:54.934871 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2512): Terminating (SIGTERM) 11:32:54.974534 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2515): Terminating (SIGTERM) 11:32:54.983877 --- ParallelTerminationStrategy: PID 2509 died... 11:32:55.036710 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2509): Terminated: ok {rc=0} 11:32:55.046244 --- ParallelTerminationStrategy: PID 2512 died... 11:32:55.098844 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2512): Terminated: ok {rc=0} 11:32:55.108500 --- ParallelTerminationStrategy: PID 2515 died... 11:32:55.161048 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2515): Terminated: ok {rc=0} 11:32:55.244173 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=2513): Process ended prematurely: osmo-stp_10.42.42.5(pid=2513) [trial-2374↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2513)]