Failed
gprs:sysmo+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=1863): Process ended prematurely: osmo-stp_10.42.42.5(pid=1863) [trial-2374↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1863)]
Standard Output
---------------------------------------------- trial-2374 gprs:sysmo+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 11:24:06.130313 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:24:06.141515 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 11:24:06.294320 tst cs_paging_gprs_active.py: using LAC 28053 11:24:06.423581 tst cs_paging_gprs_active.py: using RAC 3 11:24:06.553514 tst cs_paging_gprs_active.py: using CellId 28053 11:24:06.684671 tst cs_paging_gprs_active.py: using BVCI 28054 11:24:06.710050 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:24:06.721302 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:24:06.732331 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:24:06.743520 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:24:06.754525 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:24:06.765613 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:24:06.776723 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:24:06.787715 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:24:06.798950 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 11:24:06.917559 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 11:24:07.201792 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 11:24:07.330872 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:24:07.653075 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1853): Launched 11:24:07.920590 run iperf3-srv_10.42.42.10(pid=1854): Launched 11:24:08.110185 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 11:24:08.239105 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:24:08.561117 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1855): Launched 11:24:08.828723 run iperf3-srv_10.42.42.10(pid=1856): Launched 11:24:09.018037 tst cs_paging_gprs_active.py:38: start network... 11:24:09.146640 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:24:09.652380 run create_hlr_db(pid=1857): Launched 11:24:09.845265 bus /gobi_6: Setting Powered False 11:24:10.865770 run create_hlr_db(pid=1857): Terminated: ok {rc=0} 11:24:11.282849 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1859): Launched 11:24:11.595619 run osmo-hlr_10.42.42.2(pid=1860): Launched 11:24:11.714414 run osmo-stp_10.42.42.5: Starting osmo-stp 11:24:12.262046 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1862): Launched 11:24:12.574489 run osmo-stp_10.42.42.5(pid=1863): Launched 11:24:12.688122 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:24:13.229332 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1865): Launched 11:24:13.339773 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:24:13.611571 run patchelf(pid=1866): Launched 11:24:13.792735 run osmo-stp_10.42.42.5(pid=1863): ERR: Terminated: ERROR {rc=1} [trial-2374↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1863)] 11:24:13.925326 run osmo-stp_10.42.42.5(pid=1863): stdout: | (launched: 2022-12-10_11:24:12.419264) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:24:14.058336 run osmo-stp_10.42.42.5(pid=1863): stderr: | �[0;m�[38;5;43m20221210112412593 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210112412593 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210112412594 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210112412594 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210112412595 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210112412595 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210112412595 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:24:14.186278 run osmo-stp_10.42.42.5(pid=1863): stdout: | (launched: 2022-12-10_11:24:12.419264) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:24:14.312615 run osmo-stp_10.42.42.5(pid=1863): stderr: | �[0;m�[38;5;43m20221210112412593 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210112412593 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210112412594 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210112412594 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210112412595 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210112412595 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210112412595 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:24:14.460853 run patchelf(pid=1866): Terminating (SIGINT) 11:24:14.635518 run patchelf(pid=1866): Terminated: ok {rc=0} 11:24:14.667442 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=1863): Process ended prematurely: osmo-stp_10.42.42.5(pid=1863) [trial-2374↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1863)] [trial-2374↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 11:24:14.676645 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 11:24:14.737348 run osmo-hlr_10.42.42.2(pid=1860): ERR: Terminated: ERROR {rc=237} [trial-2374↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=1860)] 11:24:14.786574 run osmo-hlr_10.42.42.2(pid=1860): stdout: | (launched: 2022-12-10_11:24:11.440611) 11:24:14.836787 run osmo-hlr_10.42.42.2(pid=1860): stderr: | �[0;m�[1;31m20221210112411622 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210112411622 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210112411622 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210112411622 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210112411622 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210112411622 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210112411634 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2374/run.2022-12-10_11-15-10/gprs:sysmo+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210112411642 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210112411643 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210112411643 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:24:14.878961 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1853): Terminating (SIGTERM) 11:24:14.918966 run iperf3-srv_10.42.42.10(pid=1854): Terminating (SIGTERM) 11:24:14.959096 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1855): Terminating (SIGTERM) 11:24:14.998962 run iperf3-srv_10.42.42.10(pid=1856): Terminating (SIGTERM) 11:24:15.038881 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1859): Terminating (SIGTERM) 11:24:15.078986 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1862): Terminating (SIGTERM) 11:24:15.119009 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1865): Terminating (SIGTERM) 11:24:15.128366 --- ParallelTerminationStrategy: PID 1853 died... 11:24:15.181480 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1853): Terminated: ok {rc=0} 11:24:15.191226 --- ParallelTerminationStrategy: PID 1854 died... 11:24:15.244316 run iperf3-srv_10.42.42.10(pid=1854): Terminated {rc=256} 11:24:15.253850 --- ParallelTerminationStrategy: PID 1855 died... 11:24:15.306816 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1855): Terminated: ok {rc=0} 11:24:15.316502 --- ParallelTerminationStrategy: PID 1856 died... 11:24:15.369460 run iperf3-srv_10.42.42.10(pid=1856): Terminated {rc=256} 11:24:15.379200 --- ParallelTerminationStrategy: PID 1859 died... 11:24:15.431880 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1859): Terminated: ok {rc=0} 11:24:15.441758 --- ParallelTerminationStrategy: PID 1862 died... 11:24:15.494708 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1862): Terminated: ok {rc=0} 11:24:15.504387 --- ParallelTerminationStrategy: PID 1865 died... 11:24:15.557315 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1865): Terminated: ok {rc=0} 11:24:15.645339 bus /gobi_0: Setting Powered False 11:24:16.786326 bus /gobi_0: Setting Powered False 11:24:17.900615 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=1863): Process ended prematurely: osmo-stp_10.42.42.5(pid=1863) [trial-2374↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1863)]