Failed
gprs:trx-b200+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=3334): Process ended prematurely: osmo-stp_10.42.42.5(pid=3334) [trial-2374↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3334)]
Standard Output
---------------------------------------------- trial-2374 gprs:trx-b200+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 11:40:32.328531 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:40:32.339980 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 11:40:32.509854 tst cs_paging_gprs_active.py: using LAC 28141 11:40:32.634313 tst cs_paging_gprs_active.py: using RAC 91 11:40:32.758483 tst cs_paging_gprs_active.py: using CellId 28141 11:40:32.883329 tst cs_paging_gprs_active.py: using BVCI 28142 11:40:32.908116 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:40:32.919350 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:40:32.930410 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:40:32.942001 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:40:32.953507 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:40:32.965115 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:40:32.976734 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:40:32.988120 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:40:32.999758 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 11:40:33.116445 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 11:40:33.409488 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 11:40:33.544701 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:40:33.878277 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3324): Launched 11:40:34.154871 run iperf3-srv_10.42.42.10(pid=3325): Launched 11:40:34.353700 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 11:40:34.489671 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:40:34.823549 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3326): Launched 11:40:35.100202 run iperf3-srv_10.42.42.10(pid=3327): Launched 11:40:35.298050 tst cs_paging_gprs_active.py:38: start network... 11:40:35.433461 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:40:35.948542 run create_hlr_db(pid=3328): Launched 11:40:36.135289 bus /gobi_6: Setting Powered False 11:40:37.157008 run create_hlr_db(pid=3328): Terminated: ok {rc=0} 11:40:37.586730 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3330): Launched 11:40:37.908567 run osmo-hlr_10.42.42.2(pid=3331): Launched 11:40:38.026153 run osmo-stp_10.42.42.5: Starting osmo-stp 11:40:38.585202 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3333): Launched 11:40:38.906099 run osmo-stp_10.42.42.5(pid=3334): Launched 11:40:39.022641 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:40:39.582224 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3336): Launched 11:40:39.696916 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:40:39.976801 run patchelf(pid=3337): Launched 11:40:40.165463 run osmo-stp_10.42.42.5(pid=3334): ERR: Terminated: ERROR {rc=1} [trial-2374↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3334)] 11:40:40.302974 run osmo-stp_10.42.42.5(pid=3334): stdout: | (launched: 2022-12-10_11:40:38.748695) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:40:40.442120 run osmo-stp_10.42.42.5(pid=3334): stderr: | �[0;m�[38;5;43m20221210114038943 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210114038943 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210114038943 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210114038944 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210114038944 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210114038944 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210114038944 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:40:40.575306 run osmo-stp_10.42.42.5(pid=3334): stdout: | (launched: 2022-12-10_11:40:38.748695) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:40:40.707222 run osmo-stp_10.42.42.5(pid=3334): stderr: | �[0;m�[38;5;43m20221210114038943 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210114038943 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210114038943 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210114038944 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210114038944 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210114038944 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210114038944 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:40:40.860796 run patchelf(pid=3337): Terminating (SIGINT) 11:40:41.041193 run patchelf(pid=3337): Terminated: ok {rc=0} 11:40:41.074272 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=3334): Process ended prematurely: osmo-stp_10.42.42.5(pid=3334) [trial-2374↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3334)] [trial-2374↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 11:40:41.084027 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 11:40:41.146274 run osmo-hlr_10.42.42.2(pid=3331): ERR: Terminated: ERROR {rc=237} [trial-2374↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=3331)] 11:40:41.197077 run osmo-hlr_10.42.42.2(pid=3331): stdout: | (launched: 2022-12-10_11:40:37.750926) 11:40:41.248301 run osmo-hlr_10.42.42.2(pid=3331): stderr: | �[0;m�[1;31m20221210114037949 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210114037949 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210114037949 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210114037949 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210114037949 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210114037949 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210114037961 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2374/run.2022-12-10_11-15-10/gprs:trx-b200+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210114037969 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210114037969 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210114037969 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:40:41.292103 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3324): Terminating (SIGTERM) 11:40:41.333277 run iperf3-srv_10.42.42.10(pid=3325): Terminating (SIGTERM) 11:40:41.374715 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3326): Terminating (SIGTERM) 11:40:41.415926 run iperf3-srv_10.42.42.10(pid=3327): Terminating (SIGTERM) 11:40:41.457299 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3330): Terminating (SIGTERM) 11:40:41.498292 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3333): Terminating (SIGTERM) 11:40:41.539348 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3336): Terminating (SIGTERM) 11:40:41.548839 --- ParallelTerminationStrategy: PID 3324 died... 11:40:41.604014 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3324): Terminated: ok {rc=0} 11:40:41.613917 --- ParallelTerminationStrategy: PID 3325 died... 11:40:41.668545 run iperf3-srv_10.42.42.10(pid=3325): Terminated {rc=256} 11:40:41.678459 --- ParallelTerminationStrategy: PID 3326 died... 11:40:41.733144 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3326): Terminated: ok {rc=0} 11:40:41.742959 --- ParallelTerminationStrategy: PID 3327 died... 11:40:41.797605 run iperf3-srv_10.42.42.10(pid=3327): Terminated {rc=256} 11:40:41.807422 --- ParallelTerminationStrategy: PID 3330 died... 11:40:41.862208 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3330): Terminated: ok {rc=0} 11:40:41.872122 --- ParallelTerminationStrategy: PID 3333 died... 11:40:41.927778 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3333): Terminated: ok {rc=0} 11:40:41.938041 --- ParallelTerminationStrategy: PID 3336 died... 11:40:41.993118 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3336): Terminated: ok {rc=0} 11:40:42.079759 bus /gobi_0: Setting Powered False 11:40:43.184640 bus /gobi_0: Setting Powered False 11:40:44.295180 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=3334): Process ended prematurely: osmo-stp_10.42.42.5(pid=3334) [trial-2374↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3334)]