Failed
gprs:trx-b200+mod-bts0-egprs.ping_idle_ping.py (from gprs_trx-b200+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=3246): Process ended prematurely: osmo-stp_10.42.42.5(pid=3246) [trial-2374↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3246)]
Standard Output
---------------------------------------------- trial-2374 gprs:trx-b200+mod-bts0-egprs ping_idle_ping.py ---------------------------------------------- 11:39:23.757409 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:39:23.768789 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x bts (candidates: 1) 11:39:23.908903 tst ping_idle_ping.py: using LAC 28135 11:39:24.034137 tst ping_idle_ping.py: using RAC 85 11:39:24.159954 tst ping_idle_ping.py: using CellId 28135 11:39:24.284091 tst ping_idle_ping.py: using BVCI 28136 11:39:24.308476 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:39:24.320005 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:39:24.331344 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:39:24.343154 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:39:24.354529 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:39:24.365685 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:39:24.377137 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:39:24.388412 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 11:39:24.678989 tst ping_idle_ping.py:24: start network... 11:39:24.811365 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:39:25.321409 run create_hlr_db(pid=3240): Launched 11:39:25.506724 bus /gobi_6: Setting Powered False 11:39:26.528467 run create_hlr_db(pid=3240): Terminated: ok {rc=0} 11:39:26.928022 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3242): Launched 11:39:27.225714 run osmo-hlr_10.42.42.2(pid=3243): Launched 11:39:27.335142 run osmo-stp_10.42.42.5: Starting osmo-stp 11:39:27.851766 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3245): Launched 11:39:28.150365 run osmo-stp_10.42.42.5(pid=3246): Launched 11:39:28.260159 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:39:28.777234 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3248): Launched 11:39:28.882860 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:39:29.141207 run patchelf(pid=3249): Launched 11:39:29.314983 run osmo-stp_10.42.42.5(pid=3246): ERR: Terminated: ERROR {rc=1} [trial-2374↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3246)] 11:39:29.441836 run osmo-stp_10.42.42.5(pid=3246): stdout: | (launched: 2022-12-10_11:39:28.003046) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:39:29.568652 run osmo-stp_10.42.42.5(pid=3246): stderr: | �[0;m�[38;5;43m20221210113928172 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210113928172 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210113928172 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210113928173 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210113928173 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210113928173 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210113928173 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:39:29.691435 run osmo-stp_10.42.42.5(pid=3246): stdout: | (launched: 2022-12-10_11:39:28.003046) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:39:29.812736 run osmo-stp_10.42.42.5(pid=3246): stderr: | �[0;m�[38;5;43m20221210113928172 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210113928172 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210113928172 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210113928173 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210113928173 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210113928173 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210113928173 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:39:29.954843 run patchelf(pid=3249): Terminating (SIGINT) 11:39:30.121854 run patchelf(pid=3249): Terminated: ok {rc=0} 11:39:30.151924 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=3246): Process ended prematurely: osmo-stp_10.42.42.5(pid=3246) [trial-2374↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3246)] [trial-2374↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27] 11:39:30.160535 tst ping_idle_ping.py:27: Test FAILED (6.4 sec) 11:39:30.220761 run osmo-hlr_10.42.42.2(pid=3243): ERR: Terminated: ERROR {rc=237} [trial-2374↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=3243)] 11:39:30.269645 run osmo-hlr_10.42.42.2(pid=3243): stdout: | (launched: 2022-12-10_11:39:27.078740) 11:39:30.319362 run osmo-hlr_10.42.42.2(pid=3243): stderr: | �[0;m�[1;31m20221210113927253 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210113927253 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210113927253 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210113927254 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210113927254 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210113927254 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210113927266 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2374/run.2022-12-10_11-15-10/gprs:trx-b200+mod-bts0-egprs/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210113927276 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210113927277 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210113927277 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:39:30.361078 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3242): Terminating (SIGTERM) 11:39:30.401078 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3245): Terminating (SIGTERM) 11:39:30.441760 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3248): Terminating (SIGTERM) 11:39:30.451126 --- ParallelTerminationStrategy: PID 3242 died... 11:39:30.504716 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3242): Terminated: ok {rc=0} 11:39:30.514687 --- ParallelTerminationStrategy: PID 3245 died... 11:39:30.568011 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3245): Terminated: ok {rc=0} 11:39:30.577937 --- ParallelTerminationStrategy: PID 3248 died... 11:39:30.631891 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3248): Terminated: ok {rc=0} 11:39:30.721253 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=3246): Process ended prematurely: osmo-stp_10.42.42.5(pid=3246) [trial-2374↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3246)]