Failed
gprs:trx-lms+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-lms+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=5858): Process ended prematurely: osmo-stp_10.42.42.5(pid=5858) [trial-2374↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5858)]
Standard Output
---------------------------------------------- trial-2374 gprs:trx-lms+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 12:04:24.897427 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 12:04:24.908703 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x bts (candidates: 1) 12:04:25.048043 tst cs_paging_gprs_active.py: using LAC 28269 12:04:25.164808 tst cs_paging_gprs_active.py: using RAC 219 12:04:25.282850 tst cs_paging_gprs_active.py: using CellId 28269 12:04:25.399630 tst cs_paging_gprs_active.py: using BVCI 28270 12:04:25.422618 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 12:04:25.433319 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 12:04:25.443683 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 12:04:25.454187 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 12:04:25.464481 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 12:04:25.474930 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 12:04:25.485519 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 12:04:25.495799 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 12:04:25.506443 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 12:04:25.624797 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 12:04:25.906360 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 12:04:26.031704 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:04:26.343985 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5848): Launched 12:04:26.602557 run iperf3-srv_10.42.42.10(pid=5849): Launched 12:04:26.785967 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 12:04:26.910825 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:04:27.222918 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5850): Launched 12:04:27.481185 run iperf3-srv_10.42.42.10(pid=5851): Launched 12:04:27.664254 tst cs_paging_gprs_active.py:38: start network... 12:04:27.790176 run osmo-hlr_10.42.42.2: Starting osmo-hlr 12:04:28.272002 run create_hlr_db(pid=5852): Launched 12:04:28.444130 bus /gobi_6: Setting Powered False 12:04:29.466615 run create_hlr_db(pid=5852): Terminated: ok {rc=0} 12:04:29.894273 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5854): Launched 12:04:30.217162 run osmo-hlr_10.42.42.2(pid=5855): Launched 12:04:30.337216 run osmo-stp_10.42.42.5: Starting osmo-stp 12:04:30.901830 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5857): Launched 12:04:31.299323 run osmo-stp_10.42.42.5(pid=5858): Launched 12:04:31.421204 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 12:04:32.069991 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5860): Launched 12:04:32.189738 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 12:04:32.473528 run patchelf(pid=5861): Launched 12:04:32.665092 run osmo-stp_10.42.42.5(pid=5858): ERR: Terminated: ERROR {rc=1} [trial-2374↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5858)] 12:04:32.803555 run osmo-stp_10.42.42.5(pid=5858): stdout: | (launched: 2022-12-10_12:04:31.067424) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:04:32.942632 run osmo-stp_10.42.42.5(pid=5858): stderr: | �[0;m�[38;5;43m20221210120431410 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210120431411 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210120431411 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210120431411 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210120431420 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210120431420 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210120431420 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:04:33.076605 run osmo-stp_10.42.42.5(pid=5858): stdout: | (launched: 2022-12-10_12:04:31.067424) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:04:33.210921 run osmo-stp_10.42.42.5(pid=5858): stderr: | �[0;m�[38;5;43m20221210120431410 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210120431411 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210120431411 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210120431411 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210120431420 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210120431420 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210120431420 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:04:33.365985 run patchelf(pid=5861): Terminating (SIGINT) 12:04:33.547910 run patchelf(pid=5861): Terminated: ok {rc=0} 12:04:33.581318 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=5858): Process ended prematurely: osmo-stp_10.42.42.5(pid=5858) [trial-2374↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5858)] [trial-2374↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 12:04:33.591154 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 12:04:33.656521 run osmo-hlr_10.42.42.2(pid=5855): ERR: Terminated: ERROR {rc=237} [trial-2374↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=5855)] 12:04:33.708753 run osmo-hlr_10.42.42.2(pid=5855): stdout: | (launched: 2022-12-10_12:04:30.058064) 12:04:33.761638 run osmo-hlr_10.42.42.2(pid=5855): stderr: | �[0;m�[1;31m20221210120430259 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210120430259 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210120430259 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210120430259 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210120430259 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210120430260 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210120430272 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2374/run.2022-12-10_11-15-10/gprs:trx-lms+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210120430280 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210120430281 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210120430281 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 12:04:33.806763 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5848): Terminating (SIGTERM) 12:04:33.849850 run iperf3-srv_10.42.42.10(pid=5849): Terminating (SIGTERM) 12:04:33.891644 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5850): Terminating (SIGTERM) 12:04:33.935418 run iperf3-srv_10.42.42.10(pid=5851): Terminating (SIGTERM) 12:04:33.978075 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5854): Terminating (SIGTERM) 12:04:34.020238 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5857): Terminating (SIGTERM) 12:04:34.063322 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5860): Terminating (SIGTERM) 12:04:34.072999 --- ParallelTerminationStrategy: PID 5848 died... 12:04:34.130866 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5848): Terminated: ok {rc=0} 12:04:34.141167 --- ParallelTerminationStrategy: PID 5849 died... 12:04:34.198183 run iperf3-srv_10.42.42.10(pid=5849): Terminated {rc=256} 12:04:34.208232 --- ParallelTerminationStrategy: PID 5850 died... 12:04:34.265223 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5850): Terminated: ok {rc=0} 12:04:34.275393 --- ParallelTerminationStrategy: PID 5851 died... 12:04:34.332118 run iperf3-srv_10.42.42.10(pid=5851): Terminated {rc=256} 12:04:34.342435 --- ParallelTerminationStrategy: PID 5854 died... 12:04:34.398732 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5854): Terminated: ok {rc=0} 12:04:34.409980 --- ParallelTerminationStrategy: PID 5857 died... 12:04:34.466576 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5857): Terminated: ok {rc=0} 12:04:34.476711 --- ParallelTerminationStrategy: PID 5860 died... 12:04:34.532819 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5860): Terminated: ok {rc=0} 12:04:34.619344 bus /gobi_0: Setting Powered False 12:04:35.725727 bus /gobi_0: Setting Powered False 12:04:36.831802 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=5858): Process ended prematurely: osmo-stp_10.42.42.5(pid=5858) [trial-2374↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5858)]