Failed
gprs:oc2g.ping.py (from gprs_oc2g)
Stacktrace
osmo-stp_10.42.42.5(pid=10868): Process ended prematurely: osmo-stp_10.42.42.5(pid=10868) [trial-2375↪gprs:oc2g↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10868)]
Standard Output
---------------------------------------------- trial-2375 gprs:oc2g ping.py ---------------------------------------------- 12:56:35.927914 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 12:56:35.939460 tst gprs:oc2g: Using 1 x bts (candidates: 1) 12:56:36.062359 tst ping.py: using LAC 28544 12:56:36.181692 tst ping.py: using RAC 239 12:56:36.305405 tst ping.py: using CellId 28544 12:56:36.432376 tst ping.py: using BVCI 28545 12:56:36.456524 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 12:56:36.467285 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 12:56:36.478302 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 12:56:36.488903 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 12:56:36.499434 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 12:56:36.510060 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 12:56:36.520718 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 12:56:36.531333 tst gprs:oc2g: Using 1 x modem (candidates: 4) 12:56:36.803924 tst ping.py:19: start network... 12:56:36.926479 run osmo-hlr_10.42.42.2: Starting osmo-hlr 12:56:37.389583 run create_hlr_db(pid=10862): Launched 12:56:37.559528 bus /gobi_6: Setting Powered False 12:56:38.579704 run create_hlr_db(pid=10862): Terminated: ok {rc=0} 12:56:38.998620 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10864): Launched 12:56:39.315315 run osmo-hlr_10.42.42.2(pid=10865): Launched 12:56:39.431401 run osmo-stp_10.42.42.5: Starting osmo-stp 12:56:39.983704 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10867): Launched 12:56:40.300333 run osmo-stp_10.42.42.5(pid=10868): Launched 12:56:40.415427 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 12:56:40.966788 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10870): Launched 12:56:41.079500 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 12:56:41.354592 run patchelf(pid=10871): Launched 12:56:41.540518 run osmo-stp_10.42.42.5(pid=10868): ERR: Terminated: ERROR {rc=1} [trial-2375↪gprs:oc2g↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10868)] 12:56:41.676928 run osmo-stp_10.42.42.5(pid=10868): stdout: | (launched: 2022-12-10_12:56:40.145064) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:56:41.812783 run osmo-stp_10.42.42.5(pid=10868): stderr: | �[0;m�[38;5;43m20221210125640335 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210125640335 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210125640335 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210125640336 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210125640336 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210125640336 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210125640336 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:56:41.944582 run osmo-stp_10.42.42.5(pid=10868): stdout: | (launched: 2022-12-10_12:56:40.145064) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:56:42.075181 run osmo-stp_10.42.42.5(pid=10868): stderr: | �[0;m�[38;5;43m20221210125640335 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210125640335 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210125640335 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210125640336 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210125640336 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210125640336 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210125640336 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:56:42.227420 run patchelf(pid=10871): Terminating (SIGINT) 12:56:42.406566 run patchelf(pid=10871): Terminated: ok {rc=0} 12:56:42.438888 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=10868): Process ended prematurely: osmo-stp_10.42.42.5(pid=10868) [trial-2375↪gprs:oc2g↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10868)] [trial-2375↪gprs:oc2g↪ping.py:22] 12:56:42.447990 tst ping.py:22: Test FAILED (6.5 sec) 12:56:42.511425 run osmo-hlr_10.42.42.2(pid=10865): ERR: Terminated: ERROR {rc=237} [trial-2375↪gprs:oc2g↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10865)] 12:56:42.562786 run osmo-hlr_10.42.42.2(pid=10865): stdout: | (launched: 2022-12-10_12:56:39.159736) 12:56:42.614676 run osmo-hlr_10.42.42.2(pid=10865): stderr: | �[0;m�[1;31m20221210125639356 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210125639356 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210125639356 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210125639357 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210125639357 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210125639357 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210125639367 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2375/run.2022-12-10_12-42-03/gprs:oc2g/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210125639375 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210125639375 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210125639376 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 12:56:42.659779 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10864): Terminating (SIGTERM) 12:56:42.702056 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10867): Terminating (SIGTERM) 12:56:42.743957 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10870): Terminating (SIGTERM) 12:56:42.753726 --- ParallelTerminationStrategy: PID 10864 died... 12:56:42.809329 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10864): Terminated: ok {rc=0} 12:56:42.819440 --- ParallelTerminationStrategy: PID 10867 died... 12:56:42.874897 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10867): Terminated: ok {rc=0} 12:56:42.885116 --- ParallelTerminationStrategy: PID 10870 died... 12:56:42.940718 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10870): Terminated: ok {rc=0} 12:56:43.026414 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10868): Process ended prematurely: osmo-stp_10.42.42.5(pid=10868) [trial-2375↪gprs:oc2g↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10868)]