Failed
gprs:trx-b200.ping.py (from gprs_trx-b200)
Stacktrace
osmo-stp_10.42.42.5(pid=11501): Process ended prematurely: osmo-stp_10.42.42.5(pid=11501) [trial-2375↪gprs:trx-b200↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11501)]
Standard Output
---------------------------------------------- trial-2375 gprs:trx-b200 ping.py ---------------------------------------------- 13:05:04.467817 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 13:05:04.479486 tst gprs:trx-b200: Using 1 x bts (candidates: 1) 13:05:04.621513 tst ping.py: using LAC 28590 13:05:04.745668 tst ping.py: using RAC 30 13:05:04.870507 tst ping.py: using CellId 28590 13:05:04.994095 tst ping.py: using BVCI 28591 13:05:05.018324 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 13:05:05.029157 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 13:05:05.039851 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 13:05:05.050593 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 13:05:05.061667 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 13:05:05.072455 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 13:05:05.083454 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 13:05:05.094408 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 13:05:05.381517 tst ping.py:19: start network... 13:05:05.511614 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:05:06.010684 run create_hlr_db(pid=11495): Launched 13:05:06.192018 bus /gobi_6: Setting Powered False 13:05:07.212683 run create_hlr_db(pid=11495): Terminated: ok {rc=0} 13:05:07.630190 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11497): Launched 13:05:07.940199 run osmo-hlr_10.42.42.2(pid=11498): Launched 13:05:08.056021 run osmo-stp_10.42.42.5: Starting osmo-stp 13:05:08.577088 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11500): Launched 13:05:08.872552 run osmo-stp_10.42.42.5(pid=11501): Launched 13:05:08.981100 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:05:09.495461 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11503): Launched 13:05:09.600304 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:05:09.856417 run patchelf(pid=11504): Launched 13:05:10.029599 run osmo-stp_10.42.42.5(pid=11501): ERR: Terminated: ERROR {rc=1} [trial-2375↪gprs:trx-b200↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11501)] 13:05:10.156234 run osmo-stp_10.42.42.5(pid=11501): stdout: | (launched: 2022-12-10_13:05:08.727543) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:05:10.283612 run osmo-stp_10.42.42.5(pid=11501): stderr: | �[0;m�[38;5;43m20221210130508898 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210130508898 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210130508898 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210130508899 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210130508899 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210130508899 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210130508899 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:05:10.406793 run osmo-stp_10.42.42.5(pid=11501): stdout: | (launched: 2022-12-10_13:05:08.727543) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:05:10.528704 run osmo-stp_10.42.42.5(pid=11501): stderr: | �[0;m�[38;5;43m20221210130508898 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210130508898 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210130508898 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210130508899 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210130508899 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210130508899 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210130508899 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:05:10.670355 run patchelf(pid=11504): Terminating (SIGINT) 13:05:10.836741 run patchelf(pid=11504): Terminated: ok {rc=0} 13:05:10.866957 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=11501): Process ended prematurely: osmo-stp_10.42.42.5(pid=11501) [trial-2375↪gprs:trx-b200↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11501)] [trial-2375↪gprs:trx-b200↪ping.py:22] 13:05:10.875564 tst ping.py:22: Test FAILED (6.4 sec) 13:05:10.935629 run osmo-hlr_10.42.42.2(pid=11498): ERR: Terminated: ERROR {rc=237} [trial-2375↪gprs:trx-b200↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11498)] 13:05:10.984552 run osmo-hlr_10.42.42.2(pid=11498): stdout: | (launched: 2022-12-10_13:05:07.790453) 13:05:11.034298 run osmo-hlr_10.42.42.2(pid=11498): stderr: | �[0;m�[1;31m20221210130507964 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210130507964 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210130507964 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210130507964 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210130507964 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210130507964 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210130507977 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2375/run.2022-12-10_12-42-03/gprs:trx-b200/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210130507985 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210130507985 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210130507985 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:05:11.075914 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11497): Terminating (SIGTERM) 13:05:11.115916 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11500): Terminating (SIGTERM) 13:05:11.155709 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11503): Terminating (SIGTERM) 13:05:11.165201 --- ParallelTerminationStrategy: PID 11497 died... 13:05:11.218272 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11497): Terminated: ok {rc=0} 13:05:11.228106 --- ParallelTerminationStrategy: PID 11500 died... 13:05:11.281136 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11500): Terminated: ok {rc=0} 13:05:11.290711 --- ParallelTerminationStrategy: PID 11503 died... 13:05:11.344077 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11503): Terminated: ok {rc=0} 13:05:11.426746 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=11501): Process ended prematurely: osmo-stp_10.42.42.5(pid=11501) [trial-2375↪gprs:trx-b200↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11501)]