Failed
gprs:nanobts+band-900.ping_idle_ping.py (from gprs_nanobts+band-900)
Stacktrace
osmo-stp_10.42.42.5(pid=15638): Process ended prematurely: osmo-stp_10.42.42.5(pid=15638) [trial-2375↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15638)]
Standard Output
---------------------------------------------- trial-2375 gprs:nanobts+band-900 ping_idle_ping.py ---------------------------------------------- 13:51:55.385146 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 13:51:55.396335 tst gprs:nanobts+band-900: Using 1 x bts (candidates: 1) 13:51:55.530638 tst ping_idle_ping.py: using LAC 28842 13:51:55.646252 tst ping_idle_ping.py: using RAC 27 13:51:55.762205 tst ping_idle_ping.py: using CellId 28842 13:51:55.877670 tst ping_idle_ping.py: using BVCI 28843 13:51:55.900126 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 13:51:55.910755 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 13:51:55.921133 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 13:51:55.931528 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 13:51:55.941790 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 13:51:55.952058 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 13:51:55.962562 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 13:51:55.972851 tst gprs:nanobts+band-900: Using 1 x modem (candidates: 4) 13:51:56.257694 tst ping_idle_ping.py:24: start network... 13:51:56.388647 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:51:56.885498 run create_hlr_db(pid=15632): Launched 13:51:57.068749 bus /gobi_6: Setting Powered False 13:51:58.088120 run create_hlr_db(pid=15632): Terminated: ok {rc=0} 13:51:58.483562 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15634): Launched 13:51:58.777016 run osmo-hlr_10.42.42.2(pid=15635): Launched 13:51:58.883623 run osmo-stp_10.42.42.5: Starting osmo-stp 13:51:59.393793 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15637): Launched 13:51:59.687802 run osmo-stp_10.42.42.5(pid=15638): Launched 13:51:59.795326 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:52:00.306263 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15640): Launched 13:52:00.411042 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:52:00.667742 run patchelf(pid=15641): Launched 13:52:00.843450 run osmo-stp_10.42.42.5(pid=15638): ERR: Terminated: ERROR {rc=1} [trial-2375↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15638)] 13:52:00.994243 run osmo-stp_10.42.42.5(pid=15638): stdout: | (launched: 2022-12-10_13:51:59.543206) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:52:01.126901 run osmo-stp_10.42.42.5(pid=15638): stderr: | �[0;m�[38;5;43m20221210135159712 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210135159713 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210135159713 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210135159713 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210135159714 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210135159714 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210135159714 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:52:01.252711 run osmo-stp_10.42.42.5(pid=15638): stdout: | (launched: 2022-12-10_13:51:59.543206) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:52:01.379680 run osmo-stp_10.42.42.5(pid=15638): stderr: | �[0;m�[38;5;43m20221210135159712 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210135159713 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210135159713 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210135159713 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210135159714 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210135159714 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210135159714 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:52:01.524642 run patchelf(pid=15641): Terminating (SIGINT) 13:52:01.695539 run patchelf(pid=15641): Terminated: ok {rc=0} 13:52:01.726841 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=15638): Process ended prematurely: osmo-stp_10.42.42.5(pid=15638) [trial-2375↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15638)] [trial-2375↪gprs:nanobts+band-900↪ping_idle_ping.py:27] 13:52:01.736125 tst ping_idle_ping.py:27: Test FAILED (6.3 sec) 13:52:01.797234 run osmo-hlr_10.42.42.2(pid=15635): ERR: Terminated: ERROR {rc=237} [trial-2375↪gprs:nanobts+band-900↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=15635)] 13:52:01.847287 run osmo-hlr_10.42.42.2(pid=15635): stdout: | (launched: 2022-12-10_13:51:58.632910) 13:52:01.897914 run osmo-hlr_10.42.42.2(pid=15635): stderr: | �[0;m�[1;31m20221210135158809 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210135158809 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210135158809 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210135158809 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210135158809 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210135158809 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210135158824 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2375/run.2022-12-10_12-42-03/gprs:nanobts+band-900/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210135158832 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210135158833 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210135158833 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:52:01.940543 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15634): Terminating (SIGTERM) 13:52:01.980853 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15637): Terminating (SIGTERM) 13:52:02.021064 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15640): Terminating (SIGTERM) 13:52:02.030468 --- ParallelTerminationStrategy: PID 15634 died... 13:52:02.084231 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15634): Terminated: ok {rc=0} 13:52:02.094667 --- ParallelTerminationStrategy: PID 15637 died... 13:52:02.148155 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15637): Terminated: ok {rc=0} 13:52:02.158297 --- ParallelTerminationStrategy: PID 15640 died... 13:52:02.211730 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15640): Terminated: ok {rc=0} 13:52:02.294069 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=15638): Process ended prematurely: osmo-stp_10.42.42.5(pid=15638) [trial-2375↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15638)]