Failed
gprs:trx-b200+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=11598): Process ended prematurely: osmo-stp_10.42.42.5(pid=11598) [trial-2375↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11598)]
Standard Output
---------------------------------------------- trial-2375 gprs:trx-b200+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 13:06:21.481163 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:06:21.491748 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 13:06:21.651771 tst cs_paging_gprs_active.py: using LAC 28597 13:06:21.773814 tst cs_paging_gprs_active.py: using RAC 37 13:06:21.890523 tst cs_paging_gprs_active.py: using CellId 28597 13:06:22.014105 tst cs_paging_gprs_active.py: using BVCI 28598 13:06:22.037185 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:06:22.047885 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:06:22.058470 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:06:22.069248 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:06:22.079806 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:06:22.090690 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:06:22.101611 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:06:22.112170 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:06:22.124075 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 13:06:22.243033 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 13:06:22.520848 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 13:06:22.646876 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:06:22.956058 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11588): Launched 13:06:23.212942 run iperf3-srv_10.42.42.10(pid=11589): Launched 13:06:23.395509 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 13:06:23.519983 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:06:23.830042 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11590): Launched 13:06:24.087243 run iperf3-srv_10.42.42.10(pid=11591): Launched 13:06:24.269777 tst cs_paging_gprs_active.py:38: start network... 13:06:24.394772 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:06:24.866995 run create_hlr_db(pid=11592): Launched 13:06:25.039479 bus /gobi_6: Setting Powered False 13:06:26.060856 run create_hlr_db(pid=11592): Terminated: ok {rc=0} 13:06:26.485492 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11594): Launched 13:06:26.805344 run osmo-hlr_10.42.42.2(pid=11595): Launched 13:06:26.926922 run osmo-stp_10.42.42.5: Starting osmo-stp 13:06:27.483195 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11597): Launched 13:06:27.803384 run osmo-stp_10.42.42.5(pid=11598): Launched 13:06:27.919473 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:06:28.478557 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11600): Launched 13:06:28.592555 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:06:28.869658 run patchelf(pid=11601): Launched 13:06:29.057493 run osmo-stp_10.42.42.5(pid=11598): ERR: Terminated: ERROR {rc=1} [trial-2375↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11598)] 13:06:29.194266 run osmo-stp_10.42.42.5(pid=11598): stdout: | (launched: 2022-12-10_13:06:27.646536) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:06:29.331428 run osmo-stp_10.42.42.5(pid=11598): stderr: | �[0;m�[38;5;43m20221210130627839 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210130627839 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210130627840 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210130627840 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210130627840 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210130627841 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210130627841 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:06:29.464220 run osmo-stp_10.42.42.5(pid=11598): stdout: | (launched: 2022-12-10_13:06:27.646536) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:06:29.596001 run osmo-stp_10.42.42.5(pid=11598): stderr: | �[0;m�[38;5;43m20221210130627839 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210130627839 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210130627840 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210130627840 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210130627840 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210130627841 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210130627841 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:06:29.748819 run patchelf(pid=11601): Terminating (SIGINT) 13:06:29.928449 run patchelf(pid=11601): Terminated: ok {rc=0} 13:06:29.961979 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=11598): Process ended prematurely: osmo-stp_10.42.42.5(pid=11598) [trial-2375↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11598)] [trial-2375↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 13:06:29.971626 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 13:06:30.034177 run osmo-hlr_10.42.42.2(pid=11595): ERR: Terminated: ERROR {rc=237} [trial-2375↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11595)] 13:06:30.085346 run osmo-hlr_10.42.42.2(pid=11595): stdout: | (launched: 2022-12-10_13:06:26.648678) 13:06:30.137307 run osmo-hlr_10.42.42.2(pid=11595): stderr: | �[0;m�[1;31m20221210130626848 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210130626849 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210130626849 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210130626849 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210130626849 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210130626849 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210130626862 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2375/run.2022-12-10_12-42-03/gprs:trx-b200+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210130626871 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210130626872 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210130626872 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:06:30.181406 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11588): Terminating (SIGTERM) 13:06:30.222944 run iperf3-srv_10.42.42.10(pid=11589): Terminating (SIGTERM) 13:06:30.264469 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11590): Terminating (SIGTERM) 13:06:30.305840 run iperf3-srv_10.42.42.10(pid=11591): Terminating (SIGTERM) 13:06:30.347354 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11594): Terminating (SIGTERM) 13:06:30.388905 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11597): Terminating (SIGTERM) 13:06:30.430330 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11600): Terminating (SIGTERM) 13:06:30.439836 --- ParallelTerminationStrategy: PID 11588 died... 13:06:30.495214 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11588): Terminated: ok {rc=0} 13:06:30.505203 --- ParallelTerminationStrategy: PID 11589 died... 13:06:30.560156 run iperf3-srv_10.42.42.10(pid=11589): Terminated {rc=256} 13:06:30.570058 --- ParallelTerminationStrategy: PID 11590 died... 13:06:30.625152 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11590): Terminated: ok {rc=0} 13:06:30.634996 --- ParallelTerminationStrategy: PID 11591 died... 13:06:30.690200 run iperf3-srv_10.42.42.10(pid=11591): Terminated {rc=256} 13:06:30.700027 --- ParallelTerminationStrategy: PID 11594 died... 13:06:30.754752 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11594): Terminated: ok {rc=0} 13:06:30.764515 --- ParallelTerminationStrategy: PID 11597 died... 13:06:30.819237 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11597): Terminated: ok {rc=0} 13:06:30.829539 --- ParallelTerminationStrategy: PID 11600 died... 13:06:30.891909 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11600): Terminated: ok {rc=0} 13:06:30.980002 bus /gobi_0: Setting Powered False 13:06:32.082804 bus /gobi_0: Setting Powered False 13:06:33.190033 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=11598): Process ended prematurely: osmo-stp_10.42.42.5(pid=11598) [trial-2375↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11598)]