Failed
gprs:oc2g+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=20617): Process ended prematurely: osmo-stp_10.42.42.5(pid=20617) [trial-2376↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20617)]
Standard Output
---------------------------------------------- trial-2376 gprs:oc2g+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 15:52:43.221394 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 15:52:43.232227 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 15:52:43.376370 tst cs_paging_gprs_active.py: using LAC 29012 15:52:43.498812 tst cs_paging_gprs_active.py: using RAC 197 15:52:43.622580 tst cs_paging_gprs_active.py: using CellId 29012 15:52:43.750147 tst cs_paging_gprs_active.py: using BVCI 29013 15:52:43.774453 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 15:52:43.785824 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 15:52:43.796875 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 15:52:43.807960 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 15:52:43.819019 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 15:52:43.830222 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 15:52:43.841393 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 15:52:43.852374 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 15:52:43.863603 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 15:52:43.982668 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 15:52:44.273871 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 15:52:44.408231 run iperf3-srv_10.42.42.10: Starting iperf3-srv 15:52:44.740269 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20607): Launched 15:52:45.014167 run iperf3-srv_10.42.42.10(pid=20608): Launched 15:52:45.211345 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 15:52:45.344879 run iperf3-srv_10.42.42.10: Starting iperf3-srv 15:52:45.675785 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20609): Launched 15:52:45.977164 run iperf3-srv_10.42.42.10(pid=20610): Launched 15:52:46.167309 tst cs_paging_gprs_active.py:38: start network... 15:52:46.297547 run osmo-hlr_10.42.42.2: Starting osmo-hlr 15:52:46.822492 run create_hlr_db(pid=20611): Launched 15:52:47.002321 bus /gobi_6: Setting Powered False 15:52:48.018996 run create_hlr_db(pid=20611): Terminated: ok {rc=0} 15:52:48.416927 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20613): Launched 15:52:48.717454 run osmo-hlr_10.42.42.2(pid=20614): Launched 15:52:48.827075 run osmo-stp_10.42.42.5: Starting osmo-stp 15:52:49.352889 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20616): Launched 15:52:49.673509 run osmo-stp_10.42.42.5(pid=20617): Launched 15:52:49.788930 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 15:52:50.348002 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20619): Launched 15:52:50.461596 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 15:52:50.739991 run patchelf(pid=20620): Launched 15:52:50.926719 run osmo-stp_10.42.42.5(pid=20617): ERR: Terminated: ERROR {rc=1} [trial-2376↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20617)] 15:52:51.063918 run osmo-stp_10.42.42.5(pid=20617): stdout: | (launched: 2022-12-10_15:52:49.516143) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 15:52:51.201690 run osmo-stp_10.42.42.5(pid=20617): stderr: | �[0;m�[38;5;43m20221210155249707 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210155249707 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210155249707 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210155249708 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210155249710 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210155249710 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210155249710 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 15:52:51.333923 run osmo-stp_10.42.42.5(pid=20617): stdout: | (launched: 2022-12-10_15:52:49.516143) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 15:52:51.464528 run osmo-stp_10.42.42.5(pid=20617): stderr: | �[0;m�[38;5;43m20221210155249707 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210155249707 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210155249707 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210155249708 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210155249710 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210155249710 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210155249710 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 15:52:51.617325 run patchelf(pid=20620): Terminating (SIGINT) 15:52:51.796571 run patchelf(pid=20620): Terminated: ok {rc=0} 15:52:51.829612 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=20617): Process ended prematurely: osmo-stp_10.42.42.5(pid=20617) [trial-2376↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20617)] [trial-2376↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 15:52:51.839210 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 15:52:51.902011 run osmo-hlr_10.42.42.2(pid=20614): ERR: Terminated: ERROR {rc=237} [trial-2376↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=20614)] 15:52:51.953306 run osmo-hlr_10.42.42.2(pid=20614): stdout: | (launched: 2022-12-10_15:52:48.569990) 15:52:52.005379 run osmo-hlr_10.42.42.2(pid=20614): stderr: | �[0;m�[1;31m20221210155248744 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210155248744 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210155248745 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210155248745 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210155248745 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210155248745 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210155248757 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2376/run.2022-12-10_15-37-08/gprs:oc2g+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210155248765 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210155248766 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210155248766 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 15:52:52.049909 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20607): Terminating (SIGTERM) 15:52:52.092146 run iperf3-srv_10.42.42.10(pid=20608): Terminating (SIGTERM) 15:52:52.134764 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20609): Terminating (SIGTERM) 15:52:52.176699 run iperf3-srv_10.42.42.10(pid=20610): Terminating (SIGTERM) 15:52:52.220368 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20613): Terminating (SIGTERM) 15:52:52.261932 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20616): Terminating (SIGTERM) 15:52:52.303961 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20619): Terminating (SIGTERM) 15:52:52.313513 --- ParallelTerminationStrategy: PID 20607 died... 15:52:52.368807 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20607): Terminated: ok {rc=0} 15:52:52.378701 --- ParallelTerminationStrategy: PID 20608 died... 15:52:52.433540 run iperf3-srv_10.42.42.10(pid=20608): Terminated {rc=256} 15:52:52.443359 --- ParallelTerminationStrategy: PID 20609 died... 15:52:52.498275 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20609): Terminated: ok {rc=0} 15:52:52.508072 --- ParallelTerminationStrategy: PID 20610 died... 15:52:52.563760 run iperf3-srv_10.42.42.10(pid=20610): Terminated {rc=256} 15:52:52.573980 --- ParallelTerminationStrategy: PID 20613 died... 15:52:52.628846 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20613): Terminated: ok {rc=0} 15:52:52.638664 --- ParallelTerminationStrategy: PID 20616 died... 15:52:52.693497 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20616): Terminated: ok {rc=0} 15:52:52.703322 --- ParallelTerminationStrategy: PID 20619 died... 15:52:52.758328 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20619): Terminated: ok {rc=0} 15:52:52.844523 bus /gobi_0: Setting Powered False 15:52:53.949055 bus /gobi_0: Setting Powered False 15:52:55.060368 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=20617): Process ended prematurely: osmo-stp_10.42.42.5(pid=20617) [trial-2376↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20617)]