Failed
gprs:oc2g+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=20957): Process ended prematurely: osmo-stp_10.42.42.5(pid=20957) [trial-2376↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20957)]
Standard Output
---------------------------------------------- trial-2376 gprs:oc2g+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 15:53:44.684690 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:53:44.695653 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 15:53:44.839966 tst cs_paging_gprs_active.py: using LAC 29017 15:53:44.955408 tst cs_paging_gprs_active.py: using RAC 202 15:53:45.075017 tst cs_paging_gprs_active.py: using CellId 29017 15:53:45.190581 tst cs_paging_gprs_active.py: using BVCI 29018 15:53:45.213473 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:53:45.224180 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:53:45.234711 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:53:45.245718 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:53:45.256521 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:53:45.267589 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:53:45.278709 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:53:45.289591 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:53:45.300655 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 15:53:45.417847 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 15:53:45.694672 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 15:53:45.819503 run iperf3-srv_10.42.42.10: Starting iperf3-srv 15:53:46.178451 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20947): Launched 15:53:46.457089 run iperf3-srv_10.42.42.10(pid=20948): Launched 15:53:46.646065 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 15:53:46.774517 run iperf3-srv_10.42.42.10: Starting iperf3-srv 15:53:47.114312 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20949): Launched 15:53:47.406468 run iperf3-srv_10.42.42.10(pid=20950): Launched 15:53:47.604084 tst cs_paging_gprs_active.py:38: start network... 15:53:47.737620 run osmo-hlr_10.42.42.2: Starting osmo-hlr 15:53:48.247814 run create_hlr_db(pid=20951): Launched 15:53:48.432780 bus /gobi_6: Setting Powered False 15:53:49.453731 run create_hlr_db(pid=20951): Terminated: ok {rc=0} 15:53:49.879219 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20953): Launched 15:53:50.199785 run osmo-hlr_10.42.42.2(pid=20954): Launched 15:53:50.320546 run osmo-stp_10.42.42.5: Starting osmo-stp 15:53:50.874624 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20956): Launched 15:53:51.195331 run osmo-stp_10.42.42.5(pid=20957): Launched 15:53:51.311721 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 15:53:51.868379 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20959): Launched 15:53:51.982022 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 15:53:52.260128 run patchelf(pid=20960): Launched 15:53:52.447050 run osmo-stp_10.42.42.5(pid=20957): ERR: Terminated: ERROR {rc=1} [trial-2376↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20957)] 15:53:52.583947 run osmo-stp_10.42.42.5(pid=20957): stdout: | (launched: 2022-12-10_15:53:51.038271) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 15:53:52.721443 run osmo-stp_10.42.42.5(pid=20957): stderr: | �[0;m�[38;5;43m20221210155351228 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210155351228 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210155351229 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210155351229 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210155351230 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210155351230 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210155351230 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 15:53:52.853504 run osmo-stp_10.42.42.5(pid=20957): stdout: | (launched: 2022-12-10_15:53:51.038271) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 15:53:52.984378 run osmo-stp_10.42.42.5(pid=20957): stderr: | �[0;m�[38;5;43m20221210155351228 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210155351228 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210155351229 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210155351229 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210155351230 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210155351230 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210155351230 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 15:53:53.138505 run patchelf(pid=20960): Terminating (SIGINT) 15:53:53.317732 run patchelf(pid=20960): Terminated: ok {rc=0} 15:53:53.350880 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=20957): Process ended prematurely: osmo-stp_10.42.42.5(pid=20957) [trial-2376↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20957)] [trial-2376↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 15:53:53.360567 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 15:53:53.422976 run osmo-hlr_10.42.42.2(pid=20954): ERR: Terminated: ERROR {rc=237} [trial-2376↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=20954)] 15:53:53.474248 run osmo-hlr_10.42.42.2(pid=20954): stdout: | (launched: 2022-12-10_15:53:50.042551) 15:53:53.525841 run osmo-hlr_10.42.42.2(pid=20954): stderr: | �[0;m�[1;31m20221210155350241 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210155350241 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210155350241 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210155350241 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210155350241 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210155350241 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210155350254 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2376/run.2022-12-10_15-37-08/gprs:oc2g+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210155350262 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210155350262 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210155350262 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 15:53:53.570028 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20947): Terminating (SIGTERM) 15:53:53.611479 run iperf3-srv_10.42.42.10(pid=20948): Terminating (SIGTERM) 15:53:53.652926 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20949): Terminating (SIGTERM) 15:53:53.694352 run iperf3-srv_10.42.42.10(pid=20950): Terminating (SIGTERM) 15:53:53.736035 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20953): Terminating (SIGTERM) 15:53:53.777723 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20956): Terminating (SIGTERM) 15:53:53.819350 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20959): Terminating (SIGTERM) 15:53:53.828871 --- ParallelTerminationStrategy: PID 20947 died... 15:53:53.884365 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20947): Terminated: ok {rc=0} 15:53:53.894316 --- ParallelTerminationStrategy: PID 20948 died... 15:53:53.949337 run iperf3-srv_10.42.42.10(pid=20948): Terminated {rc=256} 15:53:53.959110 --- ParallelTerminationStrategy: PID 20949 died... 15:53:54.014155 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20949): Terminated: ok {rc=0} 15:53:54.024005 --- ParallelTerminationStrategy: PID 20950 died... 15:53:54.079159 run iperf3-srv_10.42.42.10(pid=20950): Terminated {rc=256} 15:53:54.089496 --- ParallelTerminationStrategy: PID 20953 died... 15:53:54.144819 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20953): Terminated: ok {rc=0} 15:53:54.154740 --- ParallelTerminationStrategy: PID 20956 died... 15:53:54.209657 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20956): Terminated: ok {rc=0} 15:53:54.219601 --- ParallelTerminationStrategy: PID 20959 died... 15:53:54.274630 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20959): Terminated: ok {rc=0} 15:53:54.360855 bus /gobi_0: Setting Powered False 15:53:55.466057 bus /gobi_0: Setting Powered False 15:53:56.573271 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=20957): Process ended prematurely: osmo-stp_10.42.42.5(pid=20957) [trial-2376↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20957)]