Failed
gprs:oc2g+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=20550): Process ended prematurely: osmo-stp_10.42.42.5(pid=20550) [trial-2376↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20550)]
Standard Output
---------------------------------------------- trial-2376 gprs:oc2g+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 15:51:43.627118 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 15:51:43.638222 tst gprs:oc2g+mod-bts0-egprs: Using 1 x bts (candidates: 1) 15:51:43.768812 tst cs_paging_gprs_active.py: using LAC 29007 15:51:43.891807 tst cs_paging_gprs_active.py: using RAC 192 15:51:44.015957 tst cs_paging_gprs_active.py: using CellId 29007 15:51:44.140794 tst cs_paging_gprs_active.py: using BVCI 29008 15:51:44.165489 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 15:51:44.177215 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 15:51:44.188627 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 15:51:44.199775 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 15:51:44.210796 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 15:51:44.221765 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 15:51:44.233009 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 15:51:44.243936 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 15:51:44.255041 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 15:51:44.369505 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 15:51:44.643960 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 15:51:44.768630 run iperf3-srv_10.42.42.10: Starting iperf3-srv 15:51:45.077454 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20540): Launched 15:51:45.333444 run iperf3-srv_10.42.42.10(pid=20541): Launched 15:51:45.514784 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 15:51:45.638847 run iperf3-srv_10.42.42.10: Starting iperf3-srv 15:51:45.985917 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20542): Launched 15:51:46.280851 run iperf3-srv_10.42.42.10(pid=20543): Launched 15:51:46.481630 tst cs_paging_gprs_active.py:38: start network... 15:51:46.618707 run osmo-hlr_10.42.42.2: Starting osmo-hlr 15:51:47.172712 run create_hlr_db(pid=20544): Launched 15:51:47.357886 bus /gobi_6: Setting Powered False 15:51:48.378133 run create_hlr_db(pid=20544): Terminated: ok {rc=0} 15:51:48.800607 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20546): Launched 15:51:49.117116 run osmo-hlr_10.42.42.2(pid=20547): Launched 15:51:49.232284 run osmo-stp_10.42.42.5: Starting osmo-stp 15:51:49.782289 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20549): Launched 15:51:50.099190 run osmo-stp_10.42.42.5(pid=20550): Launched 15:51:50.213787 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 15:51:50.767504 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20552): Launched 15:51:50.880870 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 15:51:51.157009 run patchelf(pid=20553): Launched 15:51:51.342920 run osmo-stp_10.42.42.5(pid=20550): ERR: Terminated: ERROR {rc=1} [trial-2376↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20550)] 15:51:51.479192 run osmo-stp_10.42.42.5(pid=20550): stdout: | (launched: 2022-12-10_15:51:49.943739) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 15:51:51.615973 run osmo-stp_10.42.42.5(pid=20550): stderr: | �[0;m�[38;5;43m20221210155150136 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210155150136 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210155150136 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210155150137 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210155150139 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210155150139 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210155150139 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 15:51:51.747314 run osmo-stp_10.42.42.5(pid=20550): stdout: | (launched: 2022-12-10_15:51:49.943739) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 15:51:51.877802 run osmo-stp_10.42.42.5(pid=20550): stderr: | �[0;m�[38;5;43m20221210155150136 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210155150136 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210155150136 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210155150137 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210155150139 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210155150139 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210155150139 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 15:51:52.030114 run patchelf(pid=20553): Terminating (SIGINT) 15:51:52.209265 run patchelf(pid=20553): Terminated: ok {rc=0} 15:51:52.241958 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=20550): Process ended prematurely: osmo-stp_10.42.42.5(pid=20550) [trial-2376↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20550)] [trial-2376↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 15:51:52.251801 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 15:51:52.314622 run osmo-hlr_10.42.42.2(pid=20547): ERR: Terminated: ERROR {rc=237} [trial-2376↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=20547)] 15:51:52.365974 run osmo-hlr_10.42.42.2(pid=20547): stdout: | (launched: 2022-12-10_15:51:48.962320) 15:51:52.417920 run osmo-hlr_10.42.42.2(pid=20547): stderr: | �[0;m�[1;31m20221210155149160 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210155149160 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210155149160 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210155149160 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210155149160 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210155149160 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210155149174 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2376/run.2022-12-10_15-37-08/gprs:oc2g+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210155149182 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210155149182 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210155149182 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 15:51:52.462290 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20540): Terminating (SIGTERM) 15:51:52.504074 run iperf3-srv_10.42.42.10(pid=20541): Terminating (SIGTERM) 15:51:52.545913 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20542): Terminating (SIGTERM) 15:51:52.587535 run iperf3-srv_10.42.42.10(pid=20543): Terminating (SIGTERM) 15:51:52.629451 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20546): Terminating (SIGTERM) 15:51:52.671442 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20549): Terminating (SIGTERM) 15:51:52.713283 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20552): Terminating (SIGTERM) 15:51:52.722889 --- ParallelTerminationStrategy: PID 20540 died... 15:51:52.779165 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20540): Terminated: ok {rc=0} 15:51:52.789250 --- ParallelTerminationStrategy: PID 20541 died... 15:51:52.844687 run iperf3-srv_10.42.42.10(pid=20541): Terminated {rc=256} 15:51:52.854595 --- ParallelTerminationStrategy: PID 20542 died... 15:51:52.910017 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20542): Terminated: ok {rc=0} 15:51:52.919983 --- ParallelTerminationStrategy: PID 20543 died... 15:51:52.975474 run iperf3-srv_10.42.42.10(pid=20543): Terminated {rc=256} 15:51:52.985432 --- ParallelTerminationStrategy: PID 20546 died... 15:51:53.041077 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20546): Terminated: ok {rc=0} 15:51:53.051024 --- ParallelTerminationStrategy: PID 20549 died... 15:51:53.106503 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20549): Terminated: ok {rc=0} 15:51:53.116369 --- ParallelTerminationStrategy: PID 20552 died... 15:51:53.172254 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20552): Terminated: ok {rc=0} 15:51:53.259593 bus /gobi_0: Setting Powered False 15:51:54.366720 bus /gobi_0: Setting Powered False 15:51:55.474023 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=20550): Process ended prematurely: osmo-stp_10.42.42.5(pid=20550) [trial-2376↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20550)]